I had a bunch of unsuccesful pairings but finally did pair, trust and connect and they show up in my BT GUI. However, the result is the same as before. No sound and the mic is not recognized as an input. I don’t know what more we can do here.
Perhaps you know of a quality Bluetooth device that would be good for work conversations, I don’t care about music, that would pair with Manjaro?
I can’t help here further, it seems.
And I didn’t even know until now that a Mic was also involved.
It should, however, just work ™
… your feedback … could be improved 
make and model?
We don’t see what you see …
I just use the built-in Wifi/Bluetooth thing that is in my laptop - a Sony Vajo SVE14
Works flawlessly.
Can’t make recommendations as to other hardware.
But I also haven’t read that the builtin bluetooth in your kind of mac-book is problematic.
It’s just a BeatX headset. Works fine on my iphone or Apple TV or ipad, but not here. I’m assuming that there is a lack of driver support for this device.
I think you assume too much.
They are paired and connected, but no sound?
Maybe you need to select them manually as audio output via pulseaudio controls.
Maybe setting up auto-connect, which will also switch the sound output to the currently active device, will do that automatically.
It sure does for me.
Including the also inbuilt microphone.
If they are connected, but still there is no sound, there should be some error message somewhere …
What is the difference between a non apple pairing mode and a (presumably) apple pairing mode?
Is there indeed such a thing with Beats headphones, or at all?
I doubt it.
pairing mode should be reached by the push of a button for a certain time until some indicator light starts flashing … my headphones do this audibly, by literally telling me …
I have tried selecting them manually in the sound controls. When selecting Beats X as the speaker, I may hear a click or nothing at all. But the input doesn’t recognize the Beats X as an option.
run
sudo dmesg -Hwx
and/or
sudo journalctl -f
in a terminal
while you are connecting/disconnecting the headphones
This could provide some clues - as we have none, so far.
I’m out of ideas - perhaps someone who owns this brand and model can help.
Or maybe the bluetooth adapter in Mac books is somehow special - I don’t know.
" What is the difference between a non apple pairing mode and a (presumably) apple pairing mode?
Is there indeed such a thing with Beats headphones, or at all?
I doubt it."
Yes, there is. If you turn it on, it will automatically pair to an apple device. If you want to connect to something else, I found you have to do something different to pair. That is that you need to push and hold the power button for 5 seconds and then it enters pairing mode.
They do have a different chip. I know that the BeatsX were a big deal when they came out because they had an Apple W1 Headphone chip.
yepp - that’s how you enable/switch the headset to - pairing mode
… as the manual states also …
Only Apple devices apparently don’t need you to do this
(rather minor, but very decisive)
task.
They, somehow, do it differently.
Since you want to pair with
… an Apple device
which is running Linux now
(in effect: a non Apple device now …)
you probably shouldn’t expect to be able to rely on the “Apple easy” feature
but go by the book instead.
… push and hold the button until the light flashes …
(my headphones, as I already said, give audible feedback - not just via a blinking light …)
Yes, I’ve done all that. It pairs. That’s not the problem.
The problem is that once paired, it doesn’t have sound, even when I select it as the output device for sound in settings. Nor is the microphone listed as an input option.
… and the “problem” that we have is:
there is no usable feedback from you to analyze the current situation
We need data, log output, …
We don’t see what you see
or do.
We don’t have a magic crystal ball.
To be of any help ,we need to know what your issues are.
Backed with data/logs.
When running the sudo dmesg -Hwx command when disconnecting, I get this massive bit of data:
~ sudo dmesg -Hwx 
[sudo] password for bryankarlan:
kern :notice: [Feb 8 15:33] Linux version 5.10.7-3-MANJARO (builduser@LEGION) (gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP PREEMPT Fri Jan 15 21:11:34 UTC 2021
kern :info : [ +0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64 root=UUID=544910ae-25e2-4f87-a7c8-6e868034c49c ro quiet splash apparmor=1 security=apparmor udev.log_priority=3
kern :info : [ +0.000000] x86/fpu: Supporting XSAVE feature 0x001: ‘x87 floating point registers’
kern :info : [ +0.000000] x86/fpu: Supporting XSAVE feature 0x002: ‘SSE registers’
kern :info : [ +0.000000] x86/fpu: Supporting XSAVE feature 0x004: ‘AVX registers’
kern :info : [ +0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
kern :info : [ +0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using ‘standard’ format.
kern :info : [ +0.000000] BIOS-provided physical RAM map:
kern :info : [ +0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
kern :info : [ +0.000000] BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
kern :info : [ +0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
kern :info : [ +0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
kern :info : [ +0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
kern :info : [ +0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
kern :info : [ +0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
kern :info : [ +0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
kern :info : [ +0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000008ad13fff] usable
kern :info : [ +0.000000] BIOS-e820: [mem 0x000000008ad14000-0x000000008ad52fff] ACPI NVS
kern :info : [ +0.000000] BIOS-e820: [mem 0x000000008ad53000-0x000000008ad68fff] usable
kern :info : [ +0.000000] BIOS-e820: [mem 0x000000008ad69000-0x000000008ad8efff] ACPI data
kern :info : [ +0.000000] BIOS-e820: [mem 0x000000008ad8f000-0x000000008ae27fff] usable
kern :info : [ +0.000000] BIOS-e820: [mem 0x000000008ae28000-0x000000008ae8efff] reserved
kern :info : [ +0.000000] BIOS-e820: [mem 0x000000008ae8f000-0x000000008aecdfff] usable
kern :info : [ +0.000000] BIOS-e820: [mem 0x000000008aece000-0x000000008aefefff] type 20
kern :info : [ +0.000000] BIOS-e820: [mem 0x000000008aeff000-0x000000008af8efff] usable
kern :info : [ +0.000000] BIOS-e820: [mem 0x000000008af8f000-0x000000008affefff] reserved
kern :info : [ +0.000000] BIOS-e820: [mem 0x000000008afff000-0x000000008affffff] usable
kern :info : [ +0.000000] BIOS-e820: [mem 0x000000008b000000-0x000000008f9fffff] reserved
kern :info : [ +0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
kern :info : [ +0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
kern :info : [ +0.000000] BIOS-e820: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
kern :info : [ +0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046f5fffff] usable
kern :info : [ +0.000000] NX (Execute Disable) protection: active
kern :info : [ +0.000000] efi: EFI v1.10 by Apple
kern :info : [ +0.000000] efi: ACPI=0x8ad8e000 ACPI 2.0=0x8ad8e014 SMBIOS=0x8ad1b000
kern :info : [ +0.000000] SMBIOS 2.4 present.
kern :info : [ +0.000000] DMI: Apple Inc. MacBookPro10,1/Mac-C3EC7CD22292981F, BIOS 262.0.0.0.0 06/10/2020
kern :info : [ +0.000000] tsc: Fast TSC calibration using PIT
kern :info : [ +0.000000] tsc: Detected 2693.962 MHz processor
kern :debug : [ +0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
kern :debug : [ +0.000003] e820: remove [mem 0x000a0000-0x000fffff] usable
kern :info : [ +0.000008] last_pfn = 0x46f600 max_arch_pfn = 0x400000000
kern :debug : [ +0.000004] MTRR default type: write-back
kern :debug : [ +0.000001] MTRR fixed ranges enabled:
kern :debug : [ +0.000001] 00000-9FFFF write-back
kern :debug : [ +0.000001] A0000-BFFFF uncachable
kern :debug : [ +0.000001] C0000-DFFFF write-protect
kern :debug : [ +0.000001] E0000-FFFFF uncachable
kern :debug : [ +0.000001] MTRR variable ranges enabled:
kern :debug : [ +0.000001] 0 base 0C0000000 mask FC0000000 uncachable
kern :debug : [ +0.000001] 1 base 0A0000000 mask FE0000000 uncachable
kern :debug : [ +0.000001] 2 base 090000000 mask FF0000000 uncachable
kern :debug : [ +0.000001] 3 base 08C000000 mask FFC000000 uncachable
kern :debug : [ +0.000001] 4 base 08B000000 mask FFF000000 uncachable
kern :debug : [ +0.000001] 5 disabled
kern :debug : [ +0.000000] 6 disabled
kern :debug : [ +0.000001] 7 disabled
kern :debug : [ +0.000001] 8 disabled
kern :debug : [ +0.000000] 9 disabled
kern :info : [ +0.000316] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
kern :info : [ +0.000253] last_pfn = 0x8b000 max_arch_pfn = 0x400000000
kern :info : [ +0.020035] check: Scanning 1 areas for low memory corruption
kern :info : [ +0.001402] Secure boot disabled
kern :info : [ +0.000001] RAMDISK: [mem 0x3685f000-0x37426fff]
kern :info : [ +0.000009] ACPI: Early table checksum verification disabled
kern :info : [ +0.000003] ACPI: RSDP 0x000000008AD8E014 000024 (v02 APPLE )
kern :info : [ +0.000004] ACPI: XSDT 0x000000008AD8E1C0 0000B4 (v01 APPLE Apple00 00000000 01000013)
kern :info : [ +0.000006] ACPI: FACP 0x000000008AD8C000 0000F4 (v04 APPLE Apple00 00000000 Loki 0000005F)
kern :info : [ +0.000006] ACPI: DSDT 0x000000008AD82000 004D5C (v01 APPLE MacBookP 00100001 INTL 20100915)
kern :info : [ +0.000004] ACPI: FACS 0x000000008AD1E000 000040
kern :info : [ +0.000003] ACPI: FACS 0x000000008AD1E000 000040
kern :info : [ +0.000003] ACPI: HPET 0x000000008AD8B000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
kern :info : [ +0.000003] ACPI: APIC 0x000000008AD8A000 0000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
kern :info : [ +0.000004] ACPI: SBST 0x000000008AD88000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
kern :info : [ +0.000003] ACPI: ECDT 0x000000008AD87000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
kern :info : [ +0.000003] ACPI: SSDT 0x000000008AD7F000 00053A (v01 APPLE SataAhci 00001000 INTL 20100915)
kern :info : [ +0.000004] ACPI: SSDT 0x000000008AD7E000 000024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
kern :info : [ +0.000003] ACPI: SSDT 0x000000008AD79000 000D3E (v01 APPLE UsbPpt 00001000 INTL 20100915)
kern :info : [ +0.000004] ACPI: SSDT 0x000000008AD77000 000159 (v02 APPLE IGHda 00001000 INTL 20100915)
kern :info : [ +0.000003] ACPI: SSDT 0x000000008AD75000 000032 (v01 APPLE SsdtS3 00001000 INTL 20100915)
kern :info : [ +0.000004] ACPI: SSDT 0x000000008AD73000 0015EB (v02 APPLE SsdtIGPU 00001000 INTL 20100915)
kern :info : [ +0.000003] ACPI: SSDT 0x000000008AD6E000 0019AA (v01 APPLE TbtPEG11 00001000 INTL 20100915)
kern :info : [ +0.000003] ACPI: SSDT 0x000000008AD6D000 00071D (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
kern :info : [ +0.000004] ACPI: SSDT 0x000000008AD6C000 000B3D (v01 PmRef CpuPm 00003000 INTL 20100915)
kern :info : [ +0.000003] ACPI: SSDT 0x000000008AD6B000 000315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915)
kern :info : [ +0.000004] ACPI: SSDT 0x000000008AD6A000 00037A (v01 PmRef ApTst 00003000 INTL 20100915)
kern :info : [ +0.000003] ACPI: DMAR 0x000000008AD69000 000088 (v01 APPLE IVB 00000001 AAPL 00000001)
kern :info : [ +0.000004] ACPI: MCFG 0x000000008AD89000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
kern :notice: [ +0.000007] ACPI: DMI detected to setup _OSI(“Darwin”): Apple hardware
kern :debug : [ +0.000002] ACPI: Local APIC address 0xfee00000
kern :info : [ +0.000046] No NUMA configuration found
kern :info : [ +0.000001] Faking a node at [mem 0x0000000000000000-0x000000046f5fffff]
kern :info : [ +0.000004] NODE_DATA(0) allocated [mem 0x46f5ef000-0x46f5f2fff]
kern :info : [ +0.027052] Zone ranges:
kern :info : [ +0.000003] DMA [mem 0x0000000000001000-0x0000000000ffffff]
kern :info : [ +0.000002] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
kern :info : [ +0.000001] Normal [mem 0x0000000100000000-0x000000046f5fffff]
kern :info : [ +0.000002] Device empty
kern :info : [ +0.000001] Movable zone start for each node
kern :info : [ +0.000001] Early memory node ranges
kern :info : [ +0.000001] node 0: [mem 0x0000000000001000-0x000000000008dfff]
kern :info : [ +0.000001] node 0: [mem 0x0000000000090000-0x000000000009ffff]
kern :info : [ +0.000001] node 0: [mem 0x0000000000100000-0x000000001fffffff]
kern :info : [ +0.000001] node 0: [mem 0x0000000020200000-0x0000000040003fff]
kern :info : [ +0.000000] node 0: [mem 0x0000000040005000-0x000000008ad13fff]
kern :info : [ +0.000001] node 0: [mem 0x000000008ad53000-0x000000008ad68fff]
kern :info : [ +0.000001] node 0: [mem 0x000000008ad8f000-0x000000008ae27fff]
kern :info : [ +0.000001] node 0: [mem 0x000000008ae8f000-0x000000008aecdfff]
kern :info : [ +0.000001] node 0: [mem 0x000000008aeff000-0x000000008af8efff]
kern :info : [ +0.000000] node 0: [mem 0x000000008afff000-0x000000008affffff]
kern :info : [ +0.000001] node 0: [mem 0x0000000100000000-0x000000046f5fffff]
kern :info : [ +0.000232] Zeroed struct page in unavailable ranges: 24017 pages
kern :info : [ +0.000002] Initmem setup node 0 [mem 0x0000000000001000-0x000000046f5fffff]
kern :debug : [ +0.000001] On node 0 totalpages: 4170287
kern :debug : [ +0.000002] DMA zone: 64 pages used for memmap
kern :debug : [ +0.000000] DMA zone: 26 pages reserved
kern :debug : [ +0.000001] DMA zone: 3997 pages, LIFO batch:0
kern :debug : [ +0.000027] DMA32 zone: 8819 pages used for memmap
kern :debug : [ +0.000001] DMA32 zone: 564370 pages, LIFO batch:63
kern :debug : [ +0.003627] Normal zone: 56280 pages used for memmap
kern :debug : [ +0.000003] Normal zone: 3601920 pages, LIFO batch:63
kern :info : [ +0.024868] Reserving Intel graphics memory at [mem 0x8ba00000-0x8f9fffff]
kern :info : [ +0.010205] Resetting Apple AirPort card (left enabled by EFI)
kern :info : [ +0.000068] ACPI: PM-Timer IO Port: 0x408
kern :debug : [ +0.000002] ACPI: Local APIC address 0xfee00000
kern :info : [ +0.000007] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
kern :info : [ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
kern :info : [ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
kern :info : [ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
kern :info : [ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
kern :info : [ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
kern :info : [ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
kern :info : [ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
kern :info : [ +0.000014] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
kern :info : [ +0.000002] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
kern :info : [ +0.000002] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
kern :debug : [ +0.000001] ACPI: IRQ0 used by override.
kern :debug : [ +0.000002] ACPI: IRQ9 used by override.
kern :info : [ +0.000002] Using ACPI (MADT) for SMP configuration information
kern :info : [ +0.000001] ACPI: HPET id: 0x8086a201 base: 0xfed00000
kern :info : [ +0.000005] TSC deadline timer available
kern :info : [ +0.000001] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
kern :info : [ +0.000026] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
kern :info : [ +0.000002] PM: hibernation: Registered nosave memory: [mem 0x0008e000-0x0008ffff]
kern :info : [ +0.000002] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000bffff]
kern :info : [ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
kern :info : [ +0.000002] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
kern :info : [ +0.000002] PM: hibernation: Registered nosave memory: [mem 0x40004000-0x40004fff]
kern :info : [ +0.000002] PM: hibernation: Registered nosave memory: [mem 0x8ad14000-0x8ad52fff]
kern :info : [ +0.000002] PM: hibernation: Registered nosave memory: [mem 0x8ad69000-0x8ad8efff]
kern :info : [ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x8ae28000-0x8ae8efff]
kern :info : [ +0.000002] PM: hibernation: Registered nosave memory: [mem 0x8aece000-0x8aefefff]
kern :info : [ +0.000002] PM: hibernation: Registered nosave memory: [mem 0x8af8f000-0x8affefff]
kern :info : [ +0.000002] PM: hibernation: Registered nosave memory: [mem 0x8b000000-0x8f9fffff]
kern :info : [ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x8fa00000-0xe00f7fff]
kern :info : [ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
kern :info : [ +0.000000] PM: hibernation: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
kern :info : [ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
kern :info : [ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xffe6ffff]
kern :info : [ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xffe70000-0xffe9ffff]
kern :info : [ +0.000000] PM: hibernation: Registered nosave memory: [mem 0xffea0000-0xffffffff]
kern :info : [ +0.000002] [mem 0x8fa00000-0xe00f7fff] available for PCI devices
kern :info : [ +0.000003] Booting paravirtualized kernel on bare hardware
kern :info : [ +0.000003] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
kern :info : [ +0.005050] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
kern :info : [ +0.000207] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
kern :debug : [ +0.000008] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
kern :debug : [ +0.000001] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
kern :info : [ +0.000027] Built 1 zonelists, mobility grouping on. Total pages: 4105098
kern :info : [ +0.000001] Policy zone: Normal
kern :notice: [ +0.000002] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64 root=UUID=544910ae-25e2-4f87-a7c8-6e868034c49c ro quiet splash apparmor=1 security=apparmor udev.log_priority=3
kern :info : [ +0.000924] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
kern :info : [ +0.000402] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
kern :info : [ +0.000087] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
kern :info : [ +0.042562] Memory: 16047564K/16681148K available (14344K kernel code, 2065K rwdata, 4832K rodata, 1720K init, 4232K bss, 633324K reserved, 0K cma-reserved)
kern :notice: [ +0.000009] random: get_random_u64 called from __kmem_cache_create+0x26/0x520 with crng_init=0
kern :info : [ +0.000119] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
kern :info : [ +0.000011] Kernel/User page tables isolation: enabled
kern :info : [ +0.000017] ftrace: allocating 42042 entries in 165 pages
kern :info : [ +0.014711] ftrace: allocated 165 pages with 4 groups
kern :info : [ +0.000101] rcu: Preemptible hierarchical RCU implementation.
kern :info : [ +0.000001] rcu: RCU dyntick-idle grace-period acceleration is enabled.
kern :info : [ +0.000002] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
kern :info : [ +0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms.
kern :info : [ +0.000001] Trampoline variant of Tasks RCU enabled.
kern :info : [ +0.000001] Rude variant of Tasks RCU enabled.
kern :info : [ +0.000001] Tracing variant of Tasks RCU enabled.
kern :info : [ +0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
kern :info : [ +0.000001] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
kern :info : [ +0.003971] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
kern :info : [ +0.000254] Console: colour dummy device 80x25
kern :info : [ +0.000014] printk: console [tty0] enabled
kern :info : [ +0.000019] ACPI: Core revision 20200925
kern :info : [ +0.000114] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
kern :info : [ +0.000015] APIC: Switch to symmetric I/O mode setup
kern :info : [ +0.000002] DMAR: Host address width 36
kern :info : [ +0.000001] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
kern :info : [ +0.000005] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
kern :info : [ +0.000001] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
kern :info : [ +0.000003] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
kern :info : [ +0.000001] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008f9fffff
kern :info : [ +0.000002] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
kern :info : [ +0.000001] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
kern :err : [ +0.000001] DMAR-IR: [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled
kern :info : [ +0.000000] DMAR-IR: Not enabling interrupt remapping
kern :warn : [ +0.000002] DMAR-IR: Failed to enable irq remapping. You are vulnerable to irq-injection attacks.
kern :info : [ +0.000072] x2apic: IRQ remapping doesn’t support X2APIC mode
kern :info : [ +0.000450] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
kern :info : [ +0.016126] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d4f65a81a, max_idle_ns: 440795232217 ns
kern :info : [ +0.000004] Calibrating delay loop (skipped), value calculated using timer frequency… 5390.42 BogoMIPS (lpj=8979873)
kern :info : [ +0.000002] pid_max: default: 32768 minimum: 301
kern :info : [ +0.014373] LSM: Security Framework initializing
kern :info : [ +0.000007] Yama: becoming mindful.
kern :info : [ +0.000022] AppArmor: AppArmor initialized
kern :info : [ +0.000039] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
kern :info : [ +0.000027] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
kern :info : [ +0.000264] mce: CPU0: Thermal monitoring enabled (TM1)
kern :info : [ +0.000011] process: using mwait in idle threads
kern :info : [ +0.000003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
kern :info : [ +0.000001] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
kern :info : [ +0.000003] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
kern :info : [ +0.000001] Spectre V2 : Mitigation: Full generic retpoline
kern :info : [ +0.000001] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
kern :info : [ +0.000001] Spectre V2 : Enabling Restricted Speculation for firmware calls
kern :info : [ +0.000001] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
kern :info : [ +0.000001] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
kern :info : [ +0.000001] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
kern :info : [ +0.000002] SRBDS: Vulnerable: No microcode
kern :info : [ +0.000001] MDS: Mitigation: Clear CPU buffers
kern :info : [ +0.000195] Freeing SMP alternatives memory: 36K
kern :info : [ +0.001093] smpboot: CPU0: Intel(R) Core™ i7-3740QM CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
kern :info : [ +0.000100] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
kern :info : [ +0.000008] … version: 3
kern :info : [ +0.000001] … bit width: 48
kern :info : [ +0.000000] … generic registers: 4
kern :info : [ +0.000001] … value mask: 0000ffffffffffff
kern :info : [ +0.000001] … max period: 00007fffffffffff
kern :info : [ +0.000000] … fixed-purpose events: 3
kern :info : [ +0.000001] … event mask: 000000070000000f
kern :info : [ +0.000135] rcu: Hierarchical SRCU implementation.
kern :info : [ +0.000368] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
kern :info : [ +0.000000] smp: Bringing up secondary CPUs …
kern :info : [ +0.000000] x86: Booting SMP configuration:
kern :info : [ +0.000000] … node #0, CPUs: #1 #2 #3 #4
kern :warn : [ +0.009670] MDS CPU bug present and SMT on, data leak possible. See MDS - Microarchitectural Data Sampling — The Linux Kernel documentation for more details.
kern :warn : [ +0.000000] #5 #6 #7
kern :info : [ +0.009597] smp: Brought up 1 node, 8 CPUs
kern :info : [ +0.000000] smpboot: Max logical packages: 1
kern :info : [ +0.000000] smpboot: Total of 8 processors activated (43120.36 BogoMIPS)
kern :info : [ +0.001264] devtmpfs: initialized
kern :info : [ +0.000000] x86/mm: Memory block size: 128MB
kern :info : [ +0.000475] PM: Registering ACPI NVS region [mem 0x8ad14000-0x8ad52fff] (258048 bytes)
kern :info : [ +0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
kern :info : [ +0.000000] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
kern :info : [ +0.000000] pinctrl core: initialized pinctrl subsystem
kern :info : [ +0.000000] PM: RTC time: 21:33:52, date: 2021-02-08
kern :info : [ +0.000000] NET: Registered protocol family 16
kern :info : [ +0.000000] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
kern :info : [ +0.000000] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
kern :info : [ +0.000000] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
kern :info : [ +0.000000] audit: initializing netlink subsys (disabled)
kern :notice: [ +0.000000] audit: type=2000 audit(1612820032.053:1): state=initialized audit_enabled=0 res=1
kern :info : [ +0.000000] thermal_sys: Registered thermal governor ‘fair_share’
kern :info : [ +0.000000] thermal_sys: Registered thermal governor ‘bang_bang’
kern :info : [ +0.000000] thermal_sys: Registered thermal governor ‘step_wise’
kern :info : [ +0.000000] thermal_sys: Registered thermal governor ‘user_space’
kern :info : [ +0.000000] thermal_sys: Registered thermal governor ‘power_allocator’
kern :info : [ +0.000000] cpuidle: using governor ladder
kern :info : [ +0.000000] cpuidle: using governor menu
kern :info : [ +0.000000] ACPI: bus type PCI registered
kern :info : [ +0.000000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
kern :info : [ +0.000000] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
kern :info : [ +0.000000] PCI: not using MMCONFIG
kern :info : [ +0.000000] PCI: Using configuration type 1 for base access
kern :info : [ +0.000000] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
kern :info : [ +0.003222] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
kern :info : [ +0.000000] ACPI: Disabled all _OSI OS vendors
kern :info : [ +0.000000] ACPI: Added _OSI(Module Device)
kern :info : [ +0.000000] ACPI: Added _OSI(Processor Device)
kern :info : [ +0.000000] ACPI: Added _OSI(3.0 _SCP Extensions)
kern :info : [ +0.000000] ACPI: Added _OSI(Processor Aggregator Device)
kern :info : [ +0.000000] ACPI: Added _OSI(Linux-Dell-Video)
kern :info : [ +0.000000] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
kern :info : [ +0.000000] ACPI: Added OSI(Linux-HPI-Hybrid-Graphics)
kern :info : [ +0.000000] ACPI: Added OSI(Darwin)
kern :info : [ +0.005250] ACPI: 12 ACPI AML tables successfully acquired and loaded
kern :info : [ +0.003979] ACPI: EC: EC started
kern :info : [ +0.000001] ACPI: EC: interrupt blocked
kern :info : [ +0.001346] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
kern :info : [ +0.000001] ACPI: EC: Boot ECDT EC used to handle transactions
kern :notice: [ +0.000195] ACPI: BIOS OSI(Darwin) query honored via DMI
kern :notice: [ +0.000381] ACPI: [Firmware Bug]: BIOS OSI(Linux) query ignored
kern :err : [ +0.000185] ACPI Error: Needed type [Reference], found [Integer] 000000009bb405aa (20200925/exresop-66)
kern :err : [ +0.000005] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20200925/dswexec-431)
kern :err : [ +0.000004] ACPI Error: Aborting method _PR.CPU0.PDC due to previous error (AE_AML_OPERAND_TYPE) (20200925/psparse-529)
kern :info : [ +0.000342] ACPI: Dynamic OEM Table Load:
kern :info : [ +0.000008] ACPI: SSDT 0xFFFF9325C09A6800 0003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
kern :info : [ +0.000689] ACPI: Dynamic OEM Table Load:
kern :info : [ +0.000005] ACPI: SSDT 0xFFFF9325C100CA00 000119 (v01 PmRef ApCst 00003000 INTL 20100915)
kern :info : [ +0.002265] ACPI: Interpreter enabled
kern :info : [ +0.000019] ACPI: (supports S0 S3 S4 S5)
kern :info : [ +0.000001] ACPI: Using IOAPIC for interrupt routing
kern :info : [ +0.000029] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
kern :info : [ +0.000541] PCI: MMCONFIG at [mem 0xe0000000-0xe9bfffff] reserved in ACPI motherboard resources
kern :info : [ +0.000011] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
kern :info : [ +0.000224] ACPI: Enabled 6 GPEs in block 00 to 3F
kern :info : [ +0.008556] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
kern :info : [ +0.000005] acpi PNP0A08:00: OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability LTR DPC]
kern :info : [ +0.000013] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9b] only partially covers this bridge
kern :info : [ +0.000333] PCI host bridge to bus 0000:00
kern :info : [ +0.000002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
kern :info : [ +0.000002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
kern :info : [ +0.000002] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
kern :info : [ +0.000001] pci_bus 0000:00: root bus resource [bus 00-ff]
kern :info : [ +0.000015] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
kern :info : [ +0.000099] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
kern :info : [ +0.000039] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
kern :info : [ +0.000087] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
kern :info : [ +0.000034] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
kern :info : [ +0.000095] pci 0000:00:01.2: [8086:0159] type 01 class 0x060400
kern :info : [ +0.000088] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
kern :info : [ +0.000110] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
kern :info : [ +0.000008] pci 0000:00:02.0: reg 0x10: [mem 0xc1400000-0xc17fffff 64bit]
kern :info : [ +0.000005] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
kern :info : [ +0.000004] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
kern :info : [ +0.000140] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
kern :info : [ +0.000017] pci 0000:00:14.0: reg 0x10: [mem 0xc1c00000-0xc1c0ffff 64bit]
kern :info : [ +0.000063] pci 0000:00:14.0: PME# supported from D3hot D3cold
kern :info : [ +0.000204] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
kern :info : [ +0.000021] pci 0000:00:16.0: reg 0x10: [mem 0xc1c17100-0xc1c1710f 64bit]
kern :info : [ +0.000076] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
kern :info : [ +0.000087] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
kern :info : [ +0.000016] pci 0000:00:1a.0: reg 0x10: [mem 0xc1c16c00-0xc1c16fff]
kern :info : [ +0.000084] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
kern :info : [ +0.000233] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
kern :info : [ +0.000015] pci 0000:00:1b.0: reg 0x10: [mem 0xc1c10000-0xc1c13fff 64bit]
kern :info : [ +0.000074] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
kern :info : [ +0.000133] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
kern :info : [ +0.000154] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
kern :info : [ +0.000132] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
kern :info : [ +0.000152] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
kern :info : [ +0.000134] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
kern :info : [ +0.000017] pci 0000:00:1d.0: reg 0x10: [mem 0xc1c16800-0xc1c16bff]
kern :info : [ +0.000084] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
kern :info : [ +0.000193] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
kern :info : [ +0.000190] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
kern :info : [ +0.000012] pci 0000:00:1f.2: reg 0x10: [io 0x3098-0x309f]
kern :info : [ +0.000008] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
kern :info : [ +0.000008] pci 0000:00:1f.2: reg 0x18: [io 0x3090-0x3097]
kern :info : [ +0.000007] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
kern :info : [ +0.000007] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
kern :info : [ +0.000008] pci 0000:00:1f.2: reg 0x24: [mem 0xc1c16000-0xc1c167ff]
kern :info : [ +0.000041] pci 0000:00:1f.2: PME# supported from D3hot
kern :info : [ +0.000085] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
kern :info : [ +0.000016] pci 0000:00:1f.3: reg 0x10: [mem 0xc1c17000-0xc1c170ff 64bit]
kern :info : [ +0.000015] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
kern :info : [ +0.000148] pci 0000:01:00.0: [10de:0fd5] type 00 class 0x030000
kern :info : [ +0.000011] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff]
kern :info : [ +0.000010] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
kern :info : [ +0.000009] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
kern :info : [ +0.000007] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
kern :info : [ +0.000007] pci 0000:01:00.0: reg 0x30: [mem 0xc1000000-0xc107ffff pref]
kern :info : [ +0.000017] pci 0000:01:00.0: BAR 1: assigned to efifb
kern :info : [ +0.000066] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
kern :info : [ +0.000095] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
kern :info : [ +0.000010] pci 0000:01:00.1: reg 0x10: [mem 0xc1080000-0xc1083fff]
kern :info : [ +0.000170] pci 0000:00:01.0: PCI bridge to [bus 01]
kern :info : [ +0.000003] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
kern :info : [ +0.000002] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
kern :info : [ +0.000002] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
kern :info : [ +0.000053] pci 0000:05:00.0: [8086:1547] type 01 class 0x060400
kern :info : [ +0.000031] pci 0000:05:00.0: enabling Extended Tags
kern :info : [ +0.000049] pci 0000:05:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000152] pci 0000:00:01.1: PCI bridge to [bus 05-6b]
kern :info : [ +0.000002] pci 0000:00:01.1: bridge window [io 0x4000-0x6fff]
kern :info : [ +0.000002] pci 0000:00:01.1: bridge window [mem 0xc1d00000-0xce9fffff]
kern :info : [ +0.000002] pci 0000:00:01.1: bridge window [mem 0xcea00000-0xdabfffff 64bit pref]
kern :info : [ +0.000133] pci 0000:06:00.0: [8086:1547] type 01 class 0x060400
kern :info : [ +0.000034] pci 0000:06:00.0: enabling Extended Tags
kern :info : [ +0.000054] pci 0000:06:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000099] pci 0000:06:03.0: [8086:1547] type 01 class 0x060400
kern :info : [ +0.000034] pci 0000:06:03.0: enabling Extended Tags
kern :info : [ +0.000053] pci 0000:06:03.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000097] pci 0000:06:04.0: [8086:1547] type 01 class 0x060400
kern :info : [ +0.000034] pci 0000:06:04.0: enabling Extended Tags
kern :info : [ +0.000053] pci 0000:06:04.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000096] pci 0000:06:05.0: [8086:1547] type 01 class 0x060400
kern :info : [ +0.000030] pci 0000:06:05.0: enabling Extended Tags
kern :info : [ +0.000053] pci 0000:06:05.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000102] pci 0000:06:06.0: [8086:1547] type 01 class 0x060400
kern :info : [ +0.000030] pci 0000:06:06.0: enabling Extended Tags
kern :info : [ +0.000053] pci 0000:06:06.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000103] pci 0000:05:00.0: PCI bridge to [bus 06-6b]
kern :info : [ +0.000004] pci 0000:05:00.0: bridge window [io 0x4000-0x5fff]
kern :info : [ +0.000002] pci 0000:05:00.0: bridge window [mem 0xc1d00000-0xca9fffff]
kern :info : [ +0.000004] pci 0000:05:00.0: bridge window [mem 0xcea00000-0xd6bfffff 64bit pref]
kern :info : [ +0.000045] acpiphp: Slot [1] registered
kern :info : [ +0.000024] pci 0000:07:00.0: [8086:1547] type 00 class 0x088000
kern :info : [ +0.000016] pci 0000:07:00.0: reg 0x10: [mem 0xc1f00000-0xc1f3ffff]
kern :info : [ +0.000009] pci 0000:07:00.0: reg 0x14: [mem 0xc1f40000-0xc1f40fff]
kern :info : [ +0.000044] pci 0000:07:00.0: enabling Extended Tags
kern :info : [ +0.000082] pci 0000:07:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000243] pci 0000:06:00.0: PCI bridge to [bus 07]
kern :info : [ +0.000006] pci 0000:06:00.0: bridge window [mem 0xc1f00000-0xc1ffffff]
kern :info : [ +0.000174] pci 0000:08:00.0: [8086:1513] type 01 class 0x060400
kern :info : [ +0.000082] pci 0000:08:00.0: enabling Extended Tags
kern :info : [ +0.000130] pci 0000:08:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000188] pci 0000:06:03.0: PCI bridge to [bus 08-38]
kern :info : [ +0.000004] pci 0000:06:03.0: bridge window [io 0x4000-0x4fff]
kern :info : [ +0.000003] pci 0000:06:03.0: bridge window [mem 0xc2000000-0xc64fffff]
kern :info : [ +0.000004] pci 0000:06:03.0: bridge window [mem 0xcea00000-0xd2afffff 64bit pref]
kern :info : [ +0.000091] pci 0000:09:00.0: [8086:1513] type 01 class 0x060400
kern :info : [ +0.000087] pci 0000:09:00.0: enabling Extended Tags
kern :info : [ +0.000135] pci 0000:09:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000173] pci 0000:09:01.0: [8086:1513] type 01 class 0x060400
kern :info : [ +0.000087] pci 0000:09:01.0: enabling Extended Tags
kern :info : [ +0.000134] pci 0000:09:01.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000173] pci 0000:09:02.0: [8086:1513] type 01 class 0x060400
kern :info : [ +0.000087] pci 0000:09:02.0: enabling Extended Tags
kern :info : [ +0.000134] pci 0000:09:02.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:09:02.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000177] pci 0000:09:04.0: [8086:1513] type 01 class 0x060400
kern :info : [ +0.000075] pci 0000:09:04.0: enabling Extended Tags
kern :info : [ +0.000137] pci 0000:09:04.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:09:04.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000175] pci 0000:09:05.0: [8086:1513] type 01 class 0x060400
kern :info : [ +0.000075] pci 0000:09:05.0: enabling Extended Tags
kern :info : [ +0.000137] pci 0000:09:05.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:09:05.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000193] pci 0000:08:00.0: PCI bridge to [bus 09-10]
kern :info : [ +0.000013] pci 0000:08:00.0: bridge window [mem 0xc2000000-0xc24fffff]
kern :info : [ +0.000009] pci 0000:08:00.0: bridge window [mem 0xcea00000-0xceafffff 64bit pref]
kern :info : [ +0.000103] pci 0000:0a:00.0: [12d8:400c] type 01 class 0x060400
kern :info : [ +0.000308] pci 0000:0a:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000196] pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
kern :info : [ +0.000013] pci 0000:09:00.0: bridge window [mem 0xc2400000-0xc24fffff]
kern :info : [ +0.000150] pci 0000:0b:03.0: [12d8:400c] type 01 class 0x060400
kern :info : [ +0.000269] pci 0000:0b:03.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:0b:03.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000184] pci 0000:0a:00.0: PCI bridge to [bus 0b-0c]
kern :info : [ +0.000018] pci 0000:0a:00.0: bridge window [mem 0xc2400000-0xc24fffff]
kern :info : [ +0.000139] pci 0000:0c:00.0: [12d8:400e] type 00 class 0x0c0310
kern :info : [ +0.000039] pci 0000:0c:00.0: reg 0x10: [mem 0xc2401000-0xc2401fff]
kern :info : [ +0.000253] pci 0000:0c:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000149] pci 0000:0c:00.1: [12d8:400e] type 00 class 0x0c0310
kern :info : [ +0.000039] pci 0000:0c:00.1: reg 0x10: [mem 0xc2400000-0xc2400fff]
kern :info : [ +0.000252] pci 0000:0c:00.1: supports D1 D2
kern :info : [ +0.000001] pci 0000:0c:00.1: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000126] pci 0000:0c:00.2: [12d8:400f] type 00 class 0x0c0320
kern :info : [ +0.000040] pci 0000:0c:00.2: reg 0x10: [mem 0xc2402000-0xc24020ff]
kern :info : [ +0.000251] pci 0000:0c:00.2: supports D1 D2
kern :info : [ +0.000001] pci 0000:0c:00.2: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000188] pci 0000:0b:03.0: PCI bridge to [bus 0c]
kern :info : [ +0.000019] pci 0000:0b:03.0: bridge window [mem 0xc2400000-0xc24fffff]
kern :info : [ +0.000153] pci 0000:0d:00.0: [14e4:16b0] type 00 class 0x020000
kern :info : [ +0.000054] pci 0000:0d:00.0: reg 0x10: [mem 0xcea00000-0xcea0ffff 64bit pref]
kern :info : [ +0.000035] pci 0000:0d:00.0: reg 0x18: [mem 0xcea10000-0xcea1ffff 64bit pref]
kern :info : [ +0.002033] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
kern :info : [ +0.004767] pci 0000:09:01.0: PCI bridge to [bus 0d]
kern :info : [ +0.000013] pci 0000:09:01.0: bridge window [mem 0xc2300000-0xc23fffff]
kern :info : [ +0.000010] pci 0000:09:01.0: bridge window [mem 0xcea00000-0xceafffff 64bit pref]
kern :info : [ +0.000102] pci 0000:0e:00.0: [11c1:5901] type 00 class 0x0c0010
kern :info : [ +0.000054] pci 0000:0e:00.0: reg 0x10: [mem 0xc2200000-0xc2200fff 64bit]
kern :info : [ +0.000288] pci 0000:0e:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000202] pci 0000:09:02.0: PCI bridge to [bus 0e]
kern :info : [ +0.000013] pci 0000:09:02.0: bridge window [mem 0xc2200000-0xc22fffff]
kern :info : [ +0.000062] pci 0000:09:04.0: PCI bridge to [bus 0f]
kern :info : [ +0.000013] pci 0000:09:04.0: bridge window [mem 0xc2100000-0xc21fffff]
kern :info : [ +0.000063] pci 0000:09:05.0: PCI bridge to [bus 10]
kern :info : [ +0.000013] pci 0000:09:05.0: bridge window [mem 0xc2000000-0xc20fffff]
kern :info : [ +0.000230] pci 0000:39:00.0: [8086:1513] type 01 class 0x060400
kern :info : [ +0.000081] pci 0000:39:00.0: enabling Extended Tags
kern :info : [ +0.000130] pci 0000:39:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000192] pci 0000:06:04.0: PCI bridge to [bus 39-69]
kern :info : [ +0.000004] pci 0000:06:04.0: bridge window [io 0x5000-0x5fff]
kern :info : [ +0.000003] pci 0000:06:04.0: bridge window [mem 0xc6500000-0xca9fffff]
kern :info : [ +0.000004] pci 0000:06:04.0: bridge window [mem 0xd2b00000-0xd6bfffff 64bit pref]
kern :info : [ +0.000090] pci 0000:3a:00.0: [8086:1513] type 01 class 0x060400
kern :info : [ +0.000086] pci 0000:3a:00.0: enabling Extended Tags
kern :info : [ +0.000135] pci 0000:3a:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:3a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000174] pci 0000:3a:01.0: [8086:1513] type 01 class 0x060400
kern :info : [ +0.000086] pci 0000:3a:01.0: enabling Extended Tags
kern :info : [ +0.000134] pci 0000:3a:01.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:3a:01.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000171] pci 0000:3a:02.0: [8086:1513] type 01 class 0x060400
kern :info : [ +0.000086] pci 0000:3a:02.0: enabling Extended Tags
kern :info : [ +0.000134] pci 0000:3a:02.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:3a:02.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000175] pci 0000:3a:04.0: [8086:1513] type 01 class 0x060400
kern :info : [ +0.000074] pci 0000:3a:04.0: enabling Extended Tags
kern :info : [ +0.000136] pci 0000:3a:04.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:3a:04.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000173] pci 0000:3a:05.0: [8086:1513] type 01 class 0x060400
kern :info : [ +0.000075] pci 0000:3a:05.0: enabling Extended Tags
kern :info : [ +0.000135] pci 0000:3a:05.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:3a:05.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000194] pci 0000:39:00.0: PCI bridge to [bus 3a-41]
kern :info : [ +0.000013] pci 0000:39:00.0: bridge window [mem 0xc6500000-0xc69fffff]
kern :info : [ +0.000009] pci 0000:39:00.0: bridge window [mem 0xd2b00000-0xd2bfffff 64bit pref]
kern :info : [ +0.000103] pci 0000:3b:00.0: [12d8:400c] type 01 class 0x060400
kern :info : [ +0.000306] pci 0000:3b:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:3b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000194] pci 0000:3a:00.0: PCI bridge to [bus 3b-3d]
kern :info : [ +0.000014] pci 0000:3a:00.0: bridge window [mem 0xc6900000-0xc69fffff]
kern :info : [ +0.000148] pci 0000:3c:03.0: [12d8:400c] type 01 class 0x060400
kern :info : [ +0.000268] pci 0000:3c:03.0: supports D1 D2
kern :info : [ +0.000002] pci 0000:3c:03.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000182] pci 0000:3b:00.0: PCI bridge to [bus 3c-3d]
kern :info : [ +0.000019] pci 0000:3b:00.0: bridge window [mem 0xc6900000-0xc69fffff]
kern :info : [ +0.000137] pci 0000:3d:00.0: [12d8:400e] type 00 class 0x0c0310
kern :info : [ +0.000040] pci 0000:3d:00.0: reg 0x10: [mem 0xc6901000-0xc6901fff]
kern :info : [ +0.000251] pci 0000:3d:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:3d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000151] pci 0000:3d:00.1: [12d8:400e] type 00 class 0x0c0310
kern :info : [ +0.000039] pci 0000:3d:00.1: reg 0x10: [mem 0xc6900000-0xc6900fff]
kern :info : [ +0.000251] pci 0000:3d:00.1: supports D1 D2
kern :info : [ +0.000001] pci 0000:3d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000127] pci 0000:3d:00.2: [12d8:400f] type 00 class 0x0c0320
kern :info : [ +0.000040] pci 0000:3d:00.2: reg 0x10: [mem 0xc6902000-0xc69020ff]
kern :info : [ +0.000251] pci 0000:3d:00.2: supports D1 D2
kern :info : [ +0.000001] pci 0000:3d:00.2: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000187] pci 0000:3c:03.0: PCI bridge to [bus 3d]
kern :info : [ +0.000019] pci 0000:3c:03.0: bridge window [mem 0xc6900000-0xc69fffff]
kern :info : [ +0.000153] pci 0000:3e:00.0: [14e4:16b0] type 00 class 0x020000
kern :info : [ +0.000054] pci 0000:3e:00.0: reg 0x10: [mem 0xd2b00000-0xd2b0ffff 64bit pref]
kern :info : [ +0.000035] pci 0000:3e:00.0: reg 0x18: [mem 0xd2b10000-0xd2b1ffff 64bit pref]
kern :info : [ +0.000460] pci 0000:3e:00.0: PME# supported from D0 D3hot D3cold
kern :info : [ +0.008090] pci 0000:3a:01.0: PCI bridge to [bus 3e]
kern :info : [ +0.000013] pci 0000:3a:01.0: bridge window [mem 0xc6800000-0xc68fffff]
kern :info : [ +0.000009] pci 0000:3a:01.0: bridge window [mem 0xd2b00000-0xd2bfffff 64bit pref]
kern :info : [ +0.000105] pci 0000:3f:00.0: [11c1:5901] type 00 class 0x0c0010
kern :info : [ +0.000055] pci 0000:3f:00.0: reg 0x10: [mem 0xc6700000-0xc6700fff 64bit]
kern :info : [ +0.000285] pci 0000:3f:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:3f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
kern :info : [ +0.000199] pci 0000:3a:02.0: PCI bridge to [bus 3f]
kern :info : [ +0.000014] pci 0000:3a:02.0: bridge window [mem 0xc6700000-0xc67fffff]
kern :info : [ +0.000061] pci 0000:3a:04.0: PCI bridge to [bus 40]
kern :info : [ +0.000013] pci 0000:3a:04.0: bridge window [mem 0xc6600000-0xc66fffff]
kern :info : [ +0.000061] pci 0000:3a:05.0: PCI bridge to [bus 41]
kern :info : [ +0.000014] pci 0000:3a:05.0: bridge window [mem 0xc6500000-0xc65fffff]
kern :info : [ +0.000088] pci 0000:06:05.0: PCI bridge to [bus 6a]
kern :info : [ +0.000006] pci 0000:06:05.0: bridge window [mem 0xc1e00000-0xc1efffff]
kern :info : [ +0.000032] pci 0000:06:06.0: PCI bridge to [bus 6b]
kern :info : [ +0.000006] pci 0000:06:06.0: bridge window [mem 0xc1d00000-0xc1dfffff]
kern :info : [ +0.000068] pci 0000:00:01.2: PCI bridge to [bus 02]
kern :info : [ +0.000005] pci 0000:00:01.2: bridge window [mem 0xc1b00000-0xc1bfffff]
kern :info : [ +0.000166] pci 0000:03:00.0: [14e4:16a3] type 00 class 0x020000
kern :info : [ +0.000040] pci 0000:03:00.0: reg 0x10: [mem 0xc1800000-0xc180ffff 64bit pref]
kern :info : [ +0.000024] pci 0000:03:00.0: reg 0x18: [mem 0xc1810000-0xc181ffff 64bit pref]
kern :info : [ +0.000040] pci 0000:03:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
kern :info : [ +0.000178] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
kern :info : [ +0.000232] pci 0000:03:00.1: [14e4:16bc] type 00 class 0x080501
kern :info : [ +0.000044] pci 0000:03:00.1: reg 0x10: [mem 0xc1820000-0xc182ffff 64bit pref]
kern :info : [ +0.000241] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
kern :info : [ +0.000238] pci 0000:00:1c.0: PCI bridge to [bus 03]
kern :info : [ +0.000008] pci 0000:00:1c.0: bridge window [mem 0xc1a00000-0xc1afffff]
kern :info : [ +0.000008] pci 0000:00:1c.0: bridge window [mem 0xc1800000-0xc18fffff 64bit pref]
kern :info : [ +0.000133] pci 0000:04:00.0: [14e4:4331] type 00 class 0x028000
kern :info : [ +0.000035] pci 0000:04:00.0: reg 0x10: [mem 0xc1900000-0xc1903fff 64bit]
kern :info : [ +0.000085] pci 0000:04:00.0: enabling Extended Tags
kern :info : [ +0.000120] pci 0000:04:00.0: supports D1 D2
kern :info : [ +0.000001] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
kern :info : [ +0.000160] pci 0000:00:1c.1: PCI bridge to [bus 04]
kern :info : [ +0.000006] pci 0000:00:1c.1: bridge window [mem 0xc1900000-0xc19fffff]
kern :info : [ +0.000648] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
kern :info : [ +0.000083] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
kern :info : [ +0.000081] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
kern :info : [ +0.000076] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
kern :info : [ +0.000078] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
kern :info : [ +0.000078] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
kern :info : [ +0.000079] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
kern :info : [ +0.000079] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
kern :info : [ +0.000246] ACPI: EC: interrupt unblocked
kern :info : [ +0.000001] ACPI: EC: event unblocked
kern :info : [ +0.000005] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
kern :info : [ +0.000000] ACPI: EC: GPE=0x17
kern :info : [ +0.000002] ACPI: _SB.PCI0.LPCB.EC: Boot ECDT EC initialization complete
kern :info : [ +0.000001] ACPI: _SB.PCI0.LPCB.EC: EC: Used to handle transactions and events
kern :info : [ +0.000052] iommu: Default domain type: Translated
kern :info : [ +0.000792] pci 0000:00:02.0: vgaarb: setting as boot VGA device
kern :info : [ +0.000000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
kern :info : [ +0.000000] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
kern :info : [ +0.000004] pci 0000:00:02.0: vgaarb: no bridge control possible
kern :info : [ +0.000001] pci 0000:01:00.0: vgaarb: bridge control possible
kern :info : [ +0.000001] pci 0000:01:00.0: vgaarb: overriding boot device
kern :info : [ +0.000001] vgaarb: loaded
kern :notice: [ +0.000159] SCSI subsystem initialized
kern :debug : [ +0.000008] libata version 3.00 loaded.
kern :info : [ +0.000000] ACPI: bus type USB registered
kern :info : [ +0.000000] usbcore: registered new interface driver usbfs
kern :info : [ +0.000000] usbcore: registered new interface driver hub
kern :info : [ +0.000000] usbcore: registered new device driver usb
kern :info : [ +0.000000] pps_core: LinuxPPS API ver. 1 registered
kern :info : [ +0.000000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
kern :info : [ +0.000000] PTP clock support registered
kern :info : [ +0.000000] EDAC MC: Ver: 3.0.0
kern :info : [ +0.000217] Registered efivars operations
kern :info : [ +0.000000] NetLabel: Initializing
kern :info : [ +0.000000] NetLabel: domain hash size = 128
kern :info : [ +0.000000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
kern :info : [ +0.000000] NetLabel: unlabeled traffic allowed by default
kern :info : [ +0.000000] PCI: Using ACPI for IRQ routing
kern :debug : [ +0.005894] PCI: pci_cache_line_size set to 64 bytes
kern :debug : [ +0.000475] e820: reserve RAM buffer [mem 0x0008e000-0x0008ffff]
kern :debug : [ +0.000002] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
kern :debug : [ +0.000001] e820: reserve RAM buffer [mem 0x8ad14000-0x8bffffff]
kern :debug : [ +0.000002] e820: reserve RAM buffer [mem 0x8ad69000-0x8bffffff]
kern :debug : [ +0.000001] e820: reserve RAM buffer [mem 0x8ae28000-0x8bffffff]
kern :debug : [ +0.000002] e820: reserve RAM buffer [mem 0x8aece000-0x8bffffff]
kern :debug : [ +0.000001] e820: reserve RAM buffer [mem 0x8af8f000-0x8bffffff]
kern :debug : [ +0.000001] e820: reserve RAM buffer [mem 0x8b000000-0x8bffffff]
kern :debug : [ +0.000001] e820: reserve RAM buffer [mem 0x46f600000-0x46fffffff]
kern :info : [ +0.000558] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
kern :info : [ +0.000006] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
kern :info : [ +0.002644] clocksource: Switched to clocksource tsc-early
kern :notice: [ +0.011162] VFS: Disk quotas dquot_6.6.0
kern :info : [ +0.000016] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
kern :info : [ +0.000103] AppArmor: AppArmor Filesystem Enabled
kern :info : [ +0.000029] pnp: PnP ACPI init
kern :info : [ +0.000317] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
kern :debug : [ +0.000007] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
kern :info : [ +0.000045] system 00:01: [io 0x1000-0x100f] has been reserved
kern :info : [ +0.000002] system 00:01: [io 0x0400-0x047f] has been reserved
kern :info : [ +0.000001] system 00:01: [io 0x0500-0x057f] has been reserved
kern :debug : [ +0.000004] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
kern :debug : [ +0.000019] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
kern :debug : [ +0.000079] pnp 00:03: Plug and Play ACPI device, IDs APP000b (active)
kern :info : [ +0.000198] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
kern :info : [ +0.000001] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
kern :info : [ +0.000001] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
kern :info : [ +0.000002] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
kern :info : [ +0.000001] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
kern :info : [ +0.000002] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
kern :info : [ +0.000001] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
kern :info : [ +0.000002] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
kern :info : [ +0.000001] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
kern :info : [ +0.000001] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
kern :debug : [ +0.000004] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
kern :info : [ +0.000236] system 00:05: [mem 0x20000000-0x201fffff] has been reserved
kern :info : [ +0.000001] system 00:05: [mem 0x40000000-0x401fffff] could not be reserved
kern :debug : [ +0.000004] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
kern :info : [ +0.000008] pnp: PnP ACPI: found 6 devices
kern :info : [ +0.005651] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
kern :info : [ +0.000053] NET: Registered protocol family 2
kern :info : [ +0.000145] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
kern :info : [ +0.000076] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
kern :info : [ +0.000209] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
kern :info : [ +0.000077] TCP: Hash tables configured (established 131072 bind 65536)
kern :info : [ +0.000072] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
kern :info : [ +0.000074] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
kern :info : [ +0.000043] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
kern :info : [ +0.000089] NET: Registered protocol family 1
kern :info : [ +0.000004] NET: Registered protocol family 44
kern :info : [ +0.000008] pci 0000:03:00.0: can’t claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
kern :info : [ +0.000007] pci 0000:09:04.0: bridge window [io 0x1000-0x0fff] to [bus 0f] add_size 1000
kern :info : [ +0.000002] pci 0000:09:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0f] add_size 200000 add_align 100000
kern :info : [ +0.000001] pci 0000:09:05.0: bridge window [io 0x1000-0x0fff] to [bus 10] add_size 1000
kern :info : [ +0.000002] pci 0000:09:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10] add_size 200000 add_align 100000
kern :info : [ +0.000002] pci 0000:08:00.0: bridge window [io 0x1000-0x0fff] to [bus 09-10] add_size 2000
kern :info : [ +0.000003] pci 0000:3a:04.0: bridge window [io 0x1000-0x0fff] to [bus 40] add_size 1000
kern :info : [ +0.000002] pci 0000:3a:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 40] add_size 200000 add_align 100000
kern :info : [ +0.000001] pci 0000:3a:05.0: bridge window [io 0x1000-0x0fff] to [bus 41] add_size 1000
kern :info : [ +0.000002] pci 0000:3a:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 41] add_size 200000 add_align 100000
kern :info : [ +0.000001] pci 0000:39:00.0: bridge window [io 0x1000-0x0fff] to [bus 3a-41] add_size 2000
kern :info : [ +0.000002] pci 0000:06:05.0: bridge window [io 0x1000-0x0fff] to [bus 6a] add_size 1000
kern :info : [ +0.000002] pci 0000:06:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6a] add_size 200000 add_align 100000
kern :info : [ +0.000001] pci 0000:06:06.0: bridge window [io 0x1000-0x0fff] to [bus 6b] add_size 1000
kern :info : [ +0.000001] pci 0000:06:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6b] add_size 200000 add_align 100000
kern :info : [ +0.000006] pci 0000:00:01.0: PCI bridge to [bus 01]
kern :info : [ +0.000003] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
kern :info : [ +0.000002] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
kern :info : [ +0.000002] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
kern :info : [ +0.000010] pci 0000:06:05.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:06:05.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
kern :info : [ +0.000003] pci 0000:06:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:06:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:06:05.0: BAR 13: no space for [io size 0x1000]
kern :info : [ +0.000001] pci 0000:06:05.0: BAR 13: failed to assign [io size 0x1000]
kern :info : [ +0.000001] pci 0000:06:06.0: BAR 13: no space for [io size 0x1000]
kern :info : [ +0.000001] pci 0000:06:06.0: BAR 13: failed to assign [io size 0x1000]
kern :info : [ +0.000003] pci 0000:06:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:06:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
kern :info : [ +0.000002] pci 0000:06:06.0: BAR 13: no space for [io size 0x1000]
kern :info : [ +0.000001] pci 0000:06:06.0: BAR 13: failed to assign [io size 0x1000]
kern :info : [ +0.000002] pci 0000:06:05.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:06:05.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
kern :info : [ +0.000002] pci 0000:06:05.0: BAR 13: no space for [io size 0x1000]
kern :info : [ +0.000001] pci 0000:06:05.0: BAR 13: failed to assign [io size 0x1000]
kern :info : [ +0.000001] pci 0000:06:00.0: PCI bridge to [bus 07]
kern :info : [ +0.000004] pci 0000:06:00.0: bridge window [mem 0xc1f00000-0xc1ffffff]
kern :info : [ +0.000006] pci 0000:08:00.0: BAR 13: no space for [io size 0x2000]
kern :info : [ +0.000001] pci 0000:08:00.0: BAR 13: failed to assign [io size 0x2000]
kern :info : [ +0.000002] pci 0000:08:00.0: BAR 13: no space for [io size 0x2000]
kern :info : [ +0.000001] pci 0000:08:00.0: BAR 13: failed to assign [io size 0x2000]
kern :info : [ +0.000004] pci 0000:09:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:09:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
kern :info : [ +0.000002] pci 0000:09:05.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:09:05.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:09:04.0: BAR 13: no space for [io size 0x1000]
kern :info : [ +0.000001] pci 0000:09:04.0: BAR 13: failed to assign [io size 0x1000]
kern :info : [ +0.000002] pci 0000:09:05.0: BAR 13: no space for [io size 0x1000]
kern :info : [ +0.000001] pci 0000:09:05.0: BAR 13: failed to assign [io size 0x1000]
kern :info : [ +0.000002] pci 0000:09:05.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:09:05.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:09:05.0: BAR 13: no space for [io size 0x1000]
kern :info : [ +0.000002] pci 0000:09:05.0: BAR 13: failed to assign [io size 0x1000]
kern :info : [ +0.000002] pci 0000:09:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:09:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:09:04.0: BAR 13: no space for [io size 0x1000]
kern :info : [ +0.000001] pci 0000:09:04.0: BAR 13: failed to assign [io size 0x1000]
kern :info : [ +0.000002] pci 0000:0b:03.0: PCI bridge to [bus 0c]
kern :info : [ +0.000010] pci 0000:0b:03.0: bridge window [mem 0xc2400000-0xc24fffff]
kern :info : [ +0.000019] pci 0000:0a:00.0: PCI bridge to [bus 0b-0c]
kern :info : [ +0.000010] pci 0000:0a:00.0: bridge window [mem 0xc2400000-0xc24fffff]
kern :info : [ +0.000018] pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
kern :info : [ +0.000008] pci 0000:09:00.0: bridge window [mem 0xc2400000-0xc24fffff]
kern :info : [ +0.000013] pci 0000:09:01.0: PCI bridge to [bus 0d]
kern :info : [ +0.000007] pci 0000:09:01.0: bridge window [mem 0xc2300000-0xc23fffff]
kern :info : [ +0.000005] pci 0000:09:01.0: bridge window [mem 0xcea00000-0xceafffff 64bit pref]
kern :info : [ +0.000009] pci 0000:09:02.0: PCI bridge to [bus 0e]
kern :info : [ +0.000007] pci 0000:09:02.0: bridge window [mem 0xc2200000-0xc22fffff]
kern :info : [ +0.000013] pci 0000:09:04.0: PCI bridge to [bus 0f]
kern :info : [ +0.000007] pci 0000:09:04.0: bridge window [mem 0xc2100000-0xc21fffff]
kern :info : [ +0.000013] pci 0000:09:05.0: PCI bridge to [bus 10]
kern :info : [ +0.000007] pci 0000:09:05.0: bridge window [mem 0xc2000000-0xc20fffff]
kern :info : [ +0.000013] pci 0000:08:00.0: PCI bridge to [bus 09-10]
kern :info : [ +0.000007] pci 0000:08:00.0: bridge window [mem 0xc2000000-0xc24fffff]
kern :info : [ +0.000005] pci 0000:08:00.0: bridge window [mem 0xcea00000-0xceafffff 64bit pref]
kern :info : [ +0.000009] pci 0000:06:03.0: PCI bridge to [bus 08-38]
kern :info : [ +0.000002] pci 0000:06:03.0: bridge window [io 0x4000-0x4fff]
kern :info : [ +0.000003] pci 0000:06:03.0: bridge window [mem 0xc2000000-0xc64fffff]
kern :info : [ +0.000003] pci 0000:06:03.0: bridge window [mem 0xcea00000-0xd2afffff 64bit pref]
kern :info : [ +0.000004] pci 0000:39:00.0: BAR 13: no space for [io size 0x2000]
kern :info : [ +0.000001] pci 0000:39:00.0: BAR 13: failed to assign [io size 0x2000]
kern :info : [ +0.000002] pci 0000:39:00.0: BAR 13: no space for [io size 0x2000]
kern :info : [ +0.000001] pci 0000:39:00.0: BAR 13: failed to assign [io size 0x2000]
kern :info : [ +0.000003] pci 0000:3a:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:3a:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
kern :info : [ +0.000002] pci 0000:3a:05.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:3a:05.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:3a:04.0: BAR 13: no space for [io size 0x1000]
kern :info : [ +0.000001] pci 0000:3a:04.0: BAR 13: failed to assign [io size 0x1000]
kern :info : [ +0.000001] pci 0000:3a:05.0: BAR 13: no space for [io size 0x1000]
kern :info : [ +0.000002] pci 0000:3a:05.0: BAR 13: failed to assign [io size 0x1000]
kern :info : [ +0.000002] pci 0000:3a:05.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:3a:05.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:3a:05.0: BAR 13: no space for [io size 0x1000]
kern :info : [ +0.000001] pci 0000:3a:05.0: BAR 13: failed to assign [io size 0x1000]
kern :info : [ +0.000002] pci 0000:3a:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
kern :info : [ +0.000001] pci 0000:3a:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
kern :info : [ +0.000002] pci 0000:3a:04.0: BAR 13: no space for [io size 0x1000]
kern :info : [ +0.000001] pci 0000:3a:04.0: BAR 13: failed to assign [io size 0x1000]
kern :info : [ +0.000001] pci 0000:3c:03.0: PCI bridge to [bus 3d]
kern :info : [ +0.000010] pci 0000:3c:03.0: bridge window [mem 0xc6900000-0xc69fffff]
kern :info : [ +0.000019] pci 0000:3b:00.0: PCI bridge to [bus 3c-3d]
kern :info : [ +0.000010] pci 0000:3b:00.0: bridge window [mem 0xc6900000-0xc69fffff]
kern :info : [ +0.000018] pci 0000:3a:00.0: PCI bridge to [bus 3b-3d]
kern :info : [ +0.000007] pci 0000:3a:00.0: bridge window [mem 0xc6900000-0xc69fffff]
kern :info : [ +0.000014] pci 0000:3a:01.0: PCI bridge to [bus 3e]
kern :info : [ +0.000007] pci 0000:3a:01.0: bridge window [mem 0xc6800000-0xc68fffff]
kern :info : [ +0.000005] pci 0000:3a:01.0: bridge window [mem 0xd2b00000-0xd2bfffff 64bit pref]
kern :info : [ +0.000009] pci 0000:3a:02.0: PCI bridge to [bus 3f]
kern :info : [ +0.000007] pci 0000:3a:02.0: bridge window [mem 0xc6700000-0xc67fffff]
kern :info : [ +0.000013] pci 0000:3a:04.0: PCI bridge to [bus 40]
kern :info : [ +0.000007] pci 0000:3a:04.0: bridge window [mem 0xc6600000-0xc66fffff]
kern :info : [ +0.000013] pci 0000:3a:05.0: PCI bridge to [bus 41]
kern :info : [ +0.000007] pci 0000:3a:05.0: bridge window [mem 0xc6500000-0xc65fffff]
kern :info : [ +0.000012] pci 0000:39:00.0: PCI bridge to [bus 3a-41]
kern :info : [ +0.000007] pci 0000:39:00.0: bridge window [mem 0xc6500000-0xc69fffff]
kern :info : [ +0.000005] pci 0000:39:00.0: bridge window [mem 0xd2b00000-0xd2bfffff 64bit pref]
kern :info : [ +0.000009] pci 0000:06:04.0: PCI bridge to [bus 39-69]
kern :info : [ +0.000002] pci 0000:06:04.0: bridge window [io 0x5000-0x5fff]
kern :info : [ +0.000003] pci 0000:06:04.0: bridge window [mem 0xc6500000-0xca9fffff]
kern :info : [ +0.000003] pci 0000:06:04.0: bridge window [mem 0xd2b00000-0xd6bfffff 64bit pref]
kern :info : [ +0.000003] pci 0000:06:05.0: PCI bridge to [bus 6a]
kern :info : [ +0.000004] pci 0000:06:05.0: bridge window [mem 0xc1e00000-0xc1efffff]
kern :info : [ +0.000005] pci 0000:06:06.0: PCI bridge to [bus 6b]
kern :info : [ +0.000003] pci 0000:06:06.0: bridge window [mem 0xc1d00000-0xc1dfffff]
kern :info : [ +0.000006] pci 0000:05:00.0: PCI bridge to [bus 06-6b]
kern :info : [ +0.000002] pci 0000:05:00.0: bridge window [io 0x4000-0x5fff]
kern :info : [ +0.000003] pci 0000:05:00.0: bridge window [mem 0xc1d00000-0xca9fffff]
kern :info : [ +0.000002] pci 0000:05:00.0: bridge window [mem 0xcea00000-0xd6bfffff 64bit pref]
kern :info : [ +0.000004] pci 0000:00:01.1: PCI bridge to [bus 05-6b]
kern :info : [ +0.000001] pci 0000:00:01.1: bridge window [io 0x4000-0x6fff]
kern :info : [ +0.000002] pci 0000:00:01.1: bridge window [mem 0xc1d00000-0xce9fffff]
kern :info : [ +0.000002] pci 0000:00:01.1: bridge window [mem 0xcea00000-0xdabfffff 64bit pref]
kern :info : [ +0.000003] pci 0000:00:01.2: PCI bridge to [bus 02]
kern :info : [ +0.000004] pci 0000:00:01.2: bridge window [mem 0xc1b00000-0xc1bfffff]
kern :info : [ +0.000009] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1a00000-0xc1a007ff pref]
kern :info : [ +0.000001] pci 0000:00:1c.0: PCI bridge to [bus 03]
kern :info : [ +0.000009] pci 0000:00:1c.0: bridge window [mem 0xc1a00000-0xc1afffff]
kern :info : [ +0.000004] pci 0000:00:1c.0: bridge window [mem 0xc1800000-0xc18fffff 64bit pref]
kern :info : [ +0.000008] pci 0000:00:1c.1: PCI bridge to [bus 04]
kern :info : [ +0.000006] pci 0000:00:1c.1: bridge window [mem 0xc1900000-0xc19fffff]
kern :info : [ +0.000013] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
kern :info : [ +0.000002] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
kern :info : [ +0.000002] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 20 [mem 0x8fa00000-0xfeafffff window]
kern :info : [ +0.000001] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
kern :info : [ +0.000001] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
kern :info : [ +0.000002] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc10fffff]
kern :info : [ +0.000001] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
kern :info : [ +0.000001] pci_bus 0000:05: resource 0 [io 0x4000-0x6fff]
kern :info : [ +0.000001] pci_bus 0000:05: resource 1 [mem 0xc1d00000-0xce9fffff]
kern :info : [ +0.000001] pci_bus 0000:05: resource 2 [mem 0xcea00000-0xdabfffff 64bit pref]
kern :info : [ +0.000001] pci_bus 0000:06: resource 0 [io 0x4000-0x5fff]
kern :info : [ +0.000001] pci_bus 0000:06: resource 1 [mem 0xc1d00000-0xca9fffff]
kern :info : [ +0.000001] pci_bus 0000:06: resource 2 [mem 0xcea00000-0xd6bfffff 64bit pref]
kern :info : [ +0.000001] pci_bus 0000:07: resource 1 [mem 0xc1f00000-0xc1ffffff]
kern :info : [ +0.000001] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
kern :info : [ +0.000002] pci_bus 0000:08: resource 1 [mem 0xc2000000-0xc64fffff]
kern :info : [ +0.000001] pci_bus 0000:08: resource 2 [mem 0xcea00000-0xd2afffff 64bit pref]
kern :info : [ +0.000001] pci_bus 0000:09: resource 1 [mem 0xc2000000-0xc24fffff]
kern :info : [ +0.000001] pci_bus 0000:09: resource 2 [mem 0xcea00000-0xceafffff 64bit pref]
kern :info : [ +0.000001] pci_bus 0000:0a: resource 1 [mem 0xc2400000-0xc24fffff]
kern :info : [ +0.000001] pci_bus 0000:0b: resource 1 [mem 0xc2400000-0xc24fffff]
kern :info : [ +0.000001] pci_bus 0000:0c: resource 1 [mem 0xc2400000-0xc24fffff]
kern :info : [ +0.000002] pci_bus 0000:0d: resource 1 [mem 0xc2300000-0xc23fffff]
kern :info : [ +0.000001] pci_bus 0000:0d: resource 2 [mem 0xcea00000-0xceafffff 64bit pref]
kern :info : [ +0.000001] pci_bus 0000:0e: resource 1 [mem 0xc2200000-0xc22fffff]
kern :info : [ +0.000001] pci_bus 0000:0f: resource 1 [mem 0xc2100000-0xc21fffff]
kern :info : [ +0.000001] pci_bus 0000:10: resource 1 [mem 0xc2000000-0xc20fffff]
kern :info : [ +0.000001] pci_bus 0000:39: resource 0 [io 0x5000-0x5fff]
kern :info : [ +0.000001] pci_bus 0000:39: resource 1 [mem 0xc6500000-0xca9fffff]
kern :info : [ +0.000001] pci_bus 0000:39: resource 2 [mem 0xd2b00000-0xd6bfffff 64bit pref]
kern :info : [ +0.000001] pci_bus 0000:3a: resource 1 [mem 0xc6500000-0xc69fffff]
kern :info : [ +0.000001] pci_bus 0000:3a: resource 2 [mem 0xd2b00000-0xd2bfffff 64bit pref]
kern :info : [ +0.000002] pci_bus 0000:3b: resource 1 [mem 0xc6900000-0xc69fffff]
kern :info : [ +0.000001] pci_bus 0000:3c: resource 1 [mem 0xc6900000-0xc69fffff]
kern :info : [ +0.000001] pci_bus 0000:3d: resource 1 [mem 0xc6900000-0xc69fffff]
kern :info : [ +0.000001] pci_bus 0000:3e: resource 1 [mem 0xc6800000-0xc68fffff]
kern :info : [ +0.000001] pci_bus 0000:3e: resource 2 [mem 0xd2b00000-0xd2bfffff 64bit pref]
kern :info : [ +0.000001] pci_bus 0000:3f: resource 1 [mem 0xc6700000-0xc67fffff]
kern :info : [ +0.000001] pci_bus 0000:40: resource 1 [mem 0xc6600000-0xc66fffff]
kern :info : [ +0.000001] pci_bus 0000:41: resource 1 [mem 0xc6500000-0xc65fffff]
kern :info : [ +0.000002] pci_bus 0000:6a: resource 1 [mem 0xc1e00000-0xc1efffff]
kern :info : [ +0.000001] pci_bus 0000:6b: resource 1 [mem 0xc1d00000-0xc1dfffff]
kern :info : [ +0.000001] pci_bus 0000:02: resource 1 [mem 0xc1b00000-0xc1bfffff]
kern :info : [ +0.000001] pci_bus 0000:03: resource 1 [mem 0xc1a00000-0xc1afffff]
kern :info : [ +0.000001] pci_bus 0000:03: resource 2 [mem 0xc1800000-0xc18fffff 64bit pref]
kern :info : [ +0.000002] pci_bus 0000:04: resource 1 [mem 0xc1900000-0xc19fffff]
kern :info : [ +0.000099] pci 0000:00:14.0: enabling device (0000 → 0002)
kern :warn : [ +0.000077] pci 0000:00:14.0: can’t derive routing for PCI INT A
kern :warn : [ +0.000001] pci 0000:00:14.0: PCI INT A: no GSI
kern :info : [ +0.000419] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
kern :info : [ +0.000049] pci 0000:05:00.0: CLS mismatch (256 != 128), using 64 bytes
kern :info : [ +0.000018] pci 0000:0c:00.0: MSI is not implemented on this device, disabling it
kern :info : [ +0.000001] pci 0000:0c:00.0: PME# is unreliable, disabling it
kern :info : [ +0.000339] pci 0000:0c:00.1: MSI is not implemented on this device, disabling it
kern :info : [ +0.000001] pci 0000:0c:00.1: PME# is unreliable, disabling it
kern :info : [ +0.000096] pci 0000:0c:00.2: MSI is not implemented on this device, disabling it
kern :info : [ +0.000001] pci 0000:0c:00.2: PME# is unreliable, disabling it
kern :warn : [ +0.000056] pci 0000:0c:00.2: EHCI: unrecognized capability 00
kern :info : [ +0.000050] pci 0000:3d:00.0: MSI is not implemented on this device, disabling it
kern :info : [ +0.000001] pci 0000:3d:00.0: PME# is unreliable, disabling it
kern :info : [ +0.000219] pci 0000:3d:00.1: MSI is not implemented on this device, disabling it
kern :info : [ +0.000001] pci 0000:3d:00.1: PME# is unreliable, disabling it
kern :info : [ +0.000094] pci 0000:3d:00.2: MSI is not implemented on this device, disabling it
kern :info : [ +0.000001] pci 0000:3d:00.2: PME# is unreliable, disabling it
kern :warn : [ +0.000061] pci 0000:3d:00.2: EHCI: unrecognized capability 00
kern :info : [ +0.000084] Trying to unpack rootfs image as initramfs…
kern :info : [ +0.116258] Freeing initrd memory: 12064K
kern :info : [ +0.000053] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
kern :info : [ +0.000002] software IO TLB: mapped [mem 0x0000000078a98000-0x000000007ca98000] (64MB)
kern :info : [ +0.000660] check: Scanning for low memory corruption every 60 seconds
kern :notice: [ +0.000289] Initialise system trusted keyrings
kern :notice: [ +0.000008] Key type blacklist registered
kern :info : [ +0.000041] workingset: timestamp_bits=41 max_order=22 bucket_order=0
kern :info : [ +0.001002] zbud: loaded
kern :notice: [ +0.010837] Key type asymmetric registered
kern :notice: [ +0.000001] Asymmetric key parser ‘x509’ registered
kern :info : [ +0.000006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
kern :info : [ +0.000028] io scheduler mq-deadline registered
kern :info : [ +0.000001] io scheduler kyber registered
kern :info : [ +0.000019] io scheduler bfq registered
kern :info : [ +0.000079] atomic64_test: passed for x86-64 platform with CX8 and with SSE
kern :info : [ +0.000294] pcieport 0000:00:01.2: enabling device (0000 → 0002)
kern :info : [ +0.000756] pcieport 0000:06:03.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ (with Cmd Compl erratum)
kern :info : [ +0.000152] pcieport 0000:06:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ (with Cmd Compl erratum)
kern :info : [ +0.000101] pcieport 0000:06:05.0: enabling device (0000 → 0002)
kern :info : [ +0.000091] pcieport 0000:06:05.0: pciehp: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ (with Cmd Compl erratum)
kern :info : [ +0.000098] pcieport 0000:06:06.0: enabling device (0000 → 0002)
kern :info : [ +0.000090] pcieport 0000:06:06.0: pciehp: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ (with Cmd Compl erratum)
kern :info : [ +0.000912] pcieport 0000:09:04.0: enabling device (0000 → 0002)
kern :info : [ +0.000093] pcieport 0000:09:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ (with Cmd Compl erratum)
kern :info : [ +0.000178] pcieport 0000:09:05.0: enabling device (0000 → 0002)
kern :info : [ +0.000094] pcieport 0000:09:05.0: pciehp: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ (with Cmd Compl erratum)
kern :info : [ +0.001176] pcieport 0000:3a:04.0: enabling device (0000 → 0002)
kern :info : [ +0.000092] pcieport 0000:3a:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ (with Cmd Compl erratum)
kern :info : [ +0.000171] pcieport 0000:3a:05.0: enabling device (0000 → 0002)
kern :info : [ +0.000096] pcieport 0000:3a:05.0: pciehp: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ (with Cmd Compl erratum)
kern :info : [ +0.000450] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
kern :info : [ +0.000030] efifb: probing for efifb
kern :info : [ +0.000042] efifb: No BGRT, not showing boot graphics
kern :info : [ +0.000002] efifb: framebuffer at 0x90020000, using 23040k, total 23040k
kern :info : [ +0.000001] efifb: mode is 2560x1440x32, linelength=16384, pages=1
kern :info : [ +0.000000] efifb: scrolling: redraw
kern :info : [ +0.000001] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
kern :info : [ +0.000033] fbcon: Deferring console take-over
kern :info : [ +0.000001] fb0: EFI VGA frame buffer device
kern :debug : [ +0.000007] intel_idle: MWAIT substates: 0x21120
kern :debug : [ +0.000002] intel_idle: v0.5.1 model 0x3A
kern :debug : [ +0.000292] intel_idle: Local APIC timer is reliable in all C-states
kern :info : [ +0.000124] ACPI: AC Adapter [ADP1] (on-line)
kern :info : [ +0.000053] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
kern :info : [ +0.004235] ACPI: Lid Switch [LID0]
kern :info : [ +0.000045] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
kern :info : [ +0.000019] ACPI: Power Button [PWRB]
kern :info : [ +0.000025] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
kern :info : [ +0.000014] ACPI: Sleep Button [SLPB]
kern :info : [ +0.000026] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
kern :info : [ +0.003185] ACPI: Power Button [PWRF]
kern :info : [ +0.003988] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
kern :info : [ +0.001726] Non-volatile memory driver v1.3
kern :info : [ +0.000002] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel jroedel@suse.de
kern :info : [ +0.000001] AMD-Vi: AMD IOMMUv2 functionality not available on this system
kern :debug : [ +0.000873] ahci 0000:00:1f.2: version 3.0
kern :info : [ +0.000215] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
kern :info : [ +0.000003] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
kern :info : [ +0.000475] scsi host0: ahci
kern :info : [ +0.000167] scsi host1: ahci
kern :info : [ +0.000113] scsi host2: ahci
kern :info : [ +0.000076] scsi host3: ahci
kern :info : [ +0.000068] scsi host4: ahci
kern :info : [ +0.000073] scsi host5: ahci
kern :info : [ +0.000032] ata1: SATA max UDMA/133 abar m2048@0xc1c16000 port 0xc1c16100 irq 45
kern :info : [ +0.000001] ata2: DUMMY
kern :info : [ +0.000001] ata3: DUMMY
kern :info : [ +0.000000] ata4: DUMMY
kern :info : [ +0.000001] ata5: DUMMY
kern :info : [ +0.000001] ata6: DUMMY
kern :info : [ +0.000048] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
kern :info : [ +0.000007] ehci-pci: EHCI PCI platform driver
kern :info : [ +0.000147] ehci-pci 0000:00:1a.0: EHCI Host Controller
kern :info : [ +0.000005] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
kern :info : [ +0.000014] ehci-pci 0000:00:1a.0: debug port 2
kern :info : [ +0.003911] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
kern :info : [ +0.000011] ehci-pci 0000:00:1a.0: irq 23, io mem 0xc1c16c00
kern :info : [ +0.011439] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
kern :info : [ +0.000072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
kern :info : [ +0.000002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ +0.000001] usb usb1: Product: EHCI Host Controller
kern :info : [ +0.000001] usb usb1: Manufacturer: Linux 5.10.7-3-MANJARO ehci_hcd
kern :info : [ +0.000001] usb usb1: SerialNumber: 0000:00:1a.0
kern :info : [ +0.000254] hub 1-0:1.0: USB hub found
kern :info : [ +0.000010] hub 1-0:1.0: 2 ports detected
kern :info : [ +0.000331] ehci-pci 0000:00:1d.0: EHCI Host Controller
kern :info : [ +0.000008] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
kern :info : [ +0.000016] ehci-pci 0000:00:1d.0: debug port 2
kern :info : [ +0.003907] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
kern :info : [ +0.000013] ehci-pci 0000:00:1d.0: irq 22, io mem 0xc1c16800
kern :info : [ +0.012050] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
kern :info : [ +0.000066] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
kern :info : [ +0.000001] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ +0.000002] usb usb2: Product: EHCI Host Controller
kern :info : [ +0.000001] usb usb2: Manufacturer: Linux 5.10.7-3-MANJARO ehci_hcd
kern :info : [ +0.000001] usb usb2: SerialNumber: 0000:00:1d.0
kern :info : [ +0.000232] hub 2-0:1.0: USB hub found
kern :info : [ +0.000010] hub 2-0:1.0: 2 ports detected
kern :info : [ +0.000301] ehci-pci 0000:0c:00.2: EHCI Host Controller
kern :info : [ +0.000006] ehci-pci 0000:0c:00.2: new USB bus registered, assigned bus number 3
kern :info : [ +0.000077] ehci-pci 0000:0c:00.2: irq 17, io mem 0xc2402000
kern :info : [ +0.012635] ehci-pci 0000:0c:00.2: USB 2.0 started, EHCI 1.00
kern :info : [ +0.000061] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
kern :info : [ +0.000002] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ +0.000001] usb usb3: Product: EHCI Host Controller
kern :info : [ +0.000001] usb usb3: Manufacturer: Linux 5.10.7-3-MANJARO ehci_hcd
kern :info : [ +0.000001] usb usb3: SerialNumber: 0000:0c:00.2
kern :info : [ +0.000219] hub 3-0:1.0: USB hub found
kern :info : [ +0.000009] hub 3-0:1.0: 4 ports detected
kern :info : [ +0.000333] ehci-pci 0000:3d:00.2: EHCI Host Controller
kern :info : [ +0.000006] ehci-pci 0000:3d:00.2: new USB bus registered, assigned bus number 4
kern :info : [ +0.000076] ehci-pci 0000:3d:00.2: irq 18, io mem 0xc6902000
kern :info : [ +0.012621] ehci-pci 0000:3d:00.2: USB 2.0 started, EHCI 1.00
kern :info : [ +0.000080] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
kern :info : [ +0.000002] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ +0.000001] usb usb4: Product: EHCI Host Controller
kern :info : [ +0.000001] usb usb4: Manufacturer: Linux 5.10.7-3-MANJARO ehci_hcd
kern :info : [ +0.000001] usb usb4: SerialNumber: 0000:3d:00.2
kern :info : [ +0.000213] hub 4-0:1.0: USB hub found
kern :info : [ +0.000009] hub 4-0:1.0: 4 ports detected
kern :info : [ +0.000193] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
kern :info : [ +0.000005] ohci-pci: OHCI PCI platform driver
kern :info : [ +0.000146] ohci-pci 0000:0c:00.0: OHCI PCI host controller
kern :info : [ +0.000006] ohci-pci 0000:0c:00.0: new USB bus registered, assigned bus number 5
kern :info : [ +0.000043] ohci-pci 0000:0c:00.0: irq 19, io mem 0xc2401000
kern :info : [ +0.060080] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
kern :info : [ +0.000003] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ +0.000001] usb usb5: Product: OHCI PCI host controller
kern :info : [ +0.000001] usb usb5: Manufacturer: Linux 5.10.7-3-MANJARO ohci_hcd
kern :info : [ +0.000001] usb usb5: SerialNumber: 0000:0c:00.0
kern :info : [ +0.000196] hub 5-0:1.0: USB hub found
kern :info : [ +0.000015] hub 5-0:1.0: 2 ports detected
kern :info : [ +0.000251] ohci-pci 0000:0c:00.1: OHCI PCI host controller
kern :info : [ +0.000006] ohci-pci 0000:0c:00.1: new USB bus registered, assigned bus number 6
kern :info : [ +0.000035] ohci-pci 0000:0c:00.1: irq 16, io mem 0xc2400000
kern :info : [ +0.059490] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
kern :info : [ +0.000003] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ +0.000001] usb usb6: Product: OHCI PCI host controller
kern :info : [ +0.000001] usb usb6: Manufacturer: Linux 5.10.7-3-MANJARO ohci_hcd
kern :info : [ +0.000001] usb usb6: SerialNumber: 0000:0c:00.1
kern :info : [ +0.000226] hub 6-0:1.0: USB hub found
kern :info : [ +0.000014] hub 6-0:1.0: 2 ports detected
kern :info : [ +0.000254] ohci-pci 0000:3d:00.0: OHCI PCI host controller
kern :info : [ +0.000005] ohci-pci 0000:3d:00.0: new USB bus registered, assigned bus number 7
kern :info : [ +0.000029] ohci-pci 0000:3d:00.0: irq 16, io mem 0xc6901000
kern :info : [ +0.059453] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
kern :info : [ +0.000003] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ +0.000001] usb usb7: Product: OHCI PCI host controller
kern :info : [ +0.000001] usb usb7: Manufacturer: Linux 5.10.7-3-MANJARO ohci_hcd
kern :info : [ +0.000001] usb usb7: SerialNumber: 0000:3d:00.0
kern :info : [ +0.000227] hub 7-0:1.0: USB hub found
kern :info : [ +0.000015] hub 7-0:1.0: 2 ports detected
kern :info : [ +0.000284] ohci-pci 0000:3d:00.1: OHCI PCI host controller
kern :info : [ +0.000007] ohci-pci 0000:3d:00.1: new USB bus registered, assigned bus number 8
kern :info : [ +0.000030] ohci-pci 0000:3d:00.1: irq 17, io mem 0xc6900000
kern :info : [ +0.059451] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
kern :info : [ +0.000003] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ +0.000001] usb usb8: Product: OHCI PCI host controller
kern :info : [ +0.000002] usb usb8: Manufacturer: Linux 5.10.7-3-MANJARO ohci_hcd
kern :info : [ +0.000000] usb usb8: SerialNumber: 0000:3d:00.1
kern :info : [ +0.000201] hub 8-0:1.0: USB hub found
kern :info : [ +0.000015] hub 8-0:1.0: 2 ports detected
kern :info : [ +0.000144] uhci_hcd: USB Universal Host Controller Interface driver
kern :info : [ +0.000059] usbcore: registered new interface driver usbserial_generic
kern :info : [ +0.000005] usbserial: USB Serial support registered for generic
kern :info : [ +0.000023] i8042: PNP: No PS/2 controller found.
kern :info : [ +0.000568] rtc_cmos 00:02: RTC can wake from S4
kern :info : [ +0.000303] rtc_cmos 00:02: registered as rtc0
kern :info : [ +0.000070] rtc_cmos 00:02: setting system clock to 2021-02-08T21:33:52 UTC (1612820032)
kern :info : [ +0.000017] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
kern :info : [ +0.000051] intel_pstate: Intel P-state driver initializing
kern :info : [ +0.000625] ledtrig-cpu: registered to indicate activity on CPUs
kern :info : [ +0.013786] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
kern :info : [ +0.000868] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :info : [ +0.000054] ata1.00: ATA-10: Aura Pro S MB258, R1016ANR, max UDMA/133
kern :info : [ +0.000002] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
kern :warn : [ +0.000184] ata1.00: READ LOG DMA EXT failed, trying PIO
kern :debug : [ +0.000001] ata1.00: failed to get Identify Device Data, Emask 0x40
kern :err : [ +0.000004] ata1.00: failed to set xfermode (err_mask=0x40)
kern :info : [ +0.032163] usb 1-1: new high-speed USB device number 2 using ehci-pci
kern :info : [ +0.016664] usb 2-1: new high-speed USB device number 2 using ehci-pci
kern :info : [ +0.009996] usb 3-1: new high-speed USB device number 2 using ehci-pci
kern :info : [ +0.013335] usb 4-1: new high-speed USB device number 2 using ehci-pci
kern :info : [ +0.085479] pstore: Registered efi as persistent store backend
kern :info : [ +0.000011] hid: raw HID events driver (C) Jiri Kosina
kern :info : [ +0.000113] ashmem: initialized
kern :info : [ +0.000085] drop_monitor: Initializing network drop monitor service
kern :info : [ +0.000049] Initializing XFRM netlink socket
kern :info : [ +0.000067] NET: Registered protocol family 10
kern :info : [ +0.005213] Segment Routing with IPv6
kern :info : [ +0.000001] RPL Segment Routing with IPv6
kern :info : [ +0.000054] NET: Registered protocol family 17
kern :info : [ +0.001278] microcode: sig=0x306a9, pf=0x10, revision=0x21
kern :info : [ +0.000285] microcode: Microcode Update Driver: v2.2.
kern :info : [ +0.000005] IPI shorthand broadcast: enabled
kern :info : [ +0.000006] sched_clock: Marking stable (939127041, 212335)->(946924279, -7584903)
kern :info : [ +0.000290] registered taskstats version 1
kern :notice: [ +0.000016] Loading compiled-in X.509 certificates
kern :notice: [ +0.005229] Loaded X.509 cert ‘Build time autogenerated kernel key: 8a686ad556c46e452fd7dfcd5b8bb6b61e7f128b’
kern :info : [ +0.001363] zswap: loaded using pool zstd/z3fold
kern :notice: [ +0.000359] Key type ._fscrypt registered
kern :notice: [ +0.000010] Key type .fscrypt registered
kern :notice: [ +0.000001] Key type fscrypt-provisioning registered
kern :info : [ +0.000153] pstore: Using crash dump compression: zstd
kern :info : [ +0.000032] AppArmor: AppArmor sha1 policy hashing enabled
kern :info : [ +0.000638] PM: Magic number: 9:832:600
kern :info : [ +0.000227] RAS: Correctable Errors collector initialized.
kern :info : [ +0.006167] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
kern :info : [ +0.000007] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kern :info : [ +0.000423] hub 1-1:1.0: USB hub found
kern :info : [ +0.000239] hub 1-1:1.0: 6 ports detected
kern :info : [ +0.019346] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
kern :info : [ +0.000004] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kern :info : [ +0.000458] hub 2-1:1.0: USB hub found
kern :info : [ +0.000194] hub 2-1:1.0: 8 ports detected
kern :info : [ +0.009566] usb 3-1: New USB device found, idVendor=05ac, idProduct=9127, bcdDevice= 1.00
kern :info : [ +0.000006] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kern :info : [ +0.000398] hub 3-1:1.0: USB hub found
kern :info : [ +0.000218] hub 3-1:1.0: 7 ports detected
kern :info : [ +0.016179] usb 4-1: New USB device found, idVendor=05ac, idProduct=9127, bcdDevice= 1.00
kern :info : [ +0.000011] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kern :info : [ +0.000540] hub 4-1:1.0: USB hub found
kern :info : [ +0.000301] hub 4-1:1.0: 7 ports detected
kern :info : [ +0.231721] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
kern :info : [ +0.019989] usb 2-1.8: new high-speed USB device number 3 using ehci-pci
kern :info : [ +0.010018] usb 3-1.4: new full-speed USB device number 3 using ehci-pci
kern :info : [ +0.020002] usb 4-1.4: new full-speed USB device number 3 using ehci-pci
kern :info : [ +0.066689] usb 1-1.1: New USB device found, idVendor=05ac, idProduct=8510, bcdDevice=80.25
kern :info : [ +0.000007] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [ +0.000003] usb 1-1.1: Product: FaceTime HD Camera (Built-in)
kern :info : [ +0.000002] usb 1-1.1: Manufacturer: Apple Inc.
kern :info : [ +0.000002] usb 1-1.1: SerialNumber: CC2EAS060JDN9KE0
kern :info : [ +0.000478] usb 2-1.8: New USB device found, idVendor=0424, idProduct=2512, bcdDevice= b.b3
kern :info : [ +0.000005] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kern :info : [ +0.000427] hub 2-1.8:1.0: USB hub found
kern :info : [ +0.000186] hub 2-1.8:1.0: 2 ports detected
kern :notice: [ +0.062882] random: fast init done
kern :info : [ +0.009669] usb 3-1.4: New USB device found, idVendor=05ac, idProduct=1107, bcdDevice= 2.09
kern :info : [ +0.000006] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [ +0.000003] usb 3-1.4: Product: Display Audio
kern :info : [ +0.000002] usb 3-1.4: Manufacturer: Apple Inc.
kern :info : [ +0.000002] usb 3-1.4: SerialNumber: 17020545
kern :info : [ +0.012928] tsc: Refined TSC clocksource calibration: 2693.872 MHz
kern :info : [ +0.000017] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4a150b53, max_idle_ns: 440795215022 ns
kern :info : [ +0.000057] clocksource: Switched to clocksource tsc
kern :info : [ +0.006532] usb 4-1.4: New USB device found, idVendor=05ac, idProduct=1107, bcdDevice= 2.09
kern :info : [ +0.000023] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [ +0.000003] usb 4-1.4: Product: Display Audio
kern :info : [ +0.000003] usb 4-1.4: Manufacturer: Apple Inc.
kern :info : [ +0.000002] usb 4-1.4: SerialNumber: 16100E97
kern :info : [ +0.070065] usb 3-1.5: new high-speed USB device number 4 using ehci-pci
kern :info : [ +0.003322] usb 4-1.5: new high-speed USB device number 4 using ehci-pci
kern :info : [ +0.111078] usb 3-1.5: New USB device found, idVendor=05ac, idProduct=1112, bcdDevice=71.60
kern :info : [ +0.000007] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [ +0.000003] usb 3-1.5: Product: FaceTime HD Camera (Display)
kern :info : [ +0.000002] usb 3-1.5: Manufacturer: Apple Inc.
kern :info : [ +0.000002] usb 3-1.5: SerialNumber: CCGCBV004GDJ9DFX
kern :info : [ +0.002215] usb 2-1.8.1: new full-speed USB device number 4 using ehci-pci
kern :info : [ +0.000431] usb 4-1.5: New USB device found, idVendor=05ac, idProduct=1112, bcdDevice=71.60
kern :info : [ +0.000005] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [ +0.000003] usb 4-1.5: Product: FaceTime HD Camera (Display)
kern :info : [ +0.000002] usb 4-1.5: Manufacturer: Apple Inc.
kern :info : [ +0.000002] usb 4-1.5: SerialNumber: CCGC2Q02PQDJ9DFX
kern :info : [ +0.072958] usb 3-1.7: new full-speed USB device number 5 using ehci-pci
kern :info : [ +0.003293] usb 4-1.7: new full-speed USB device number 5 using ehci-pci
kern :info : [ +0.022709] usb 2-1.8.1: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00
kern :info : [ +0.000006] usb 2-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
kern :info : [ +0.000003] usb 2-1.8.1: Product: BRCM20702 Hub
kern :info : [ +0.000002] usb 2-1.8.1: Manufacturer: Apple Inc.
kern :info : [ +0.000405] hub 2-1.8.1:1.0: USB hub found
kern :info : [ +0.000330] hub 2-1.8.1:1.0: 3 ports detected
kern :info : [ +0.072763] usb 3-1.7: New USB device found, idVendor=05ac, idProduct=9227, bcdDevice= 1.38
kern :info : [ +0.000007] usb 3-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [ +0.000003] usb 3-1.7: Product: Apple Thunderbolt Display
kern :info : [ +0.000002] usb 3-1.7: Manufacturer: Apple Inc.
kern :info : [ +0.000002] usb 3-1.7: SerialNumber: 17020545
kern :info : [ +0.000378] usb 2-1.8.2: new full-speed USB device number 5 using ehci-pci
kern :info : [ +0.002650] usb 4-1.7: New USB device found, idVendor=05ac, idProduct=9227, bcdDevice= 1.38
kern :info : [ +0.000007] usb 4-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kern :info : [ +0.000003] usb 4-1.7: Product: Apple Thunderbolt Display
kern :info : [ +0.000002] usb 4-1.7: Manufacturer: Apple Inc.
kern :info : [ +0.000002] usb 4-1.7: SerialNumber: 16100E97
kern :info : [ +0.101252] usb 2-1.8.2: New USB device found, idVendor=05ac, idProduct=0262, bcdDevice= 2.22
kern :info : [ +0.000007] usb 2-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
kern :info : [ +0.000003] usb 2-1.8.2: Product: Apple Internal Keyboard / Trackpad
kern :info : [ +0.000002] usb 2-1.8.2: Manufacturer: Apple Inc.
kern :info : [ +0.102803] usb 2-1.8.1.1: new full-speed USB device number 6 using ehci-pci
kern :info : [ +0.099555] usb 2-1.8.1.1: New USB device found, idVendor=05ac, idProduct=820a, bcdDevice= 1.00
kern :info : [ +0.000007] usb 2-1.8.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kern :info : [ +0.073770] usb 2-1.8.1.2: new full-speed USB device number 7 using ehci-pci
kern :info : [ +0.099318] usb 2-1.8.1.2: New USB device found, idVendor=05ac, idProduct=820b, bcdDevice= 1.00
kern :info : [ +0.000006] usb 2-1.8.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kern :info : [ +0.074015] usb 2-1.8.1.3: new full-speed USB device number 8 using ehci-pci
kern :info : [ +0.100476] usb 2-1.8.1.3: New USB device found, idVendor=05ac, idProduct=8286, bcdDevice= 1.56
kern :info : [ +0.000006] usb 2-1.8.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
kern :info : [ +0.000003] usb 2-1.8.1.3: Product: Bluetooth USB Host Controller
kern :info : [ +0.000002] usb 2-1.8.1.3: Manufacturer: Apple Inc.
kern :info : [ +3.827086] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
kern :info : [ +0.001133] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :info : [ +0.000729] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
kern :info : [ +0.000310] ata1.00: configured for UDMA/133
kern :notice: [ +0.010477] scsi 0:0:0:0: Direct-Access ATA Aura Pro S MB258 6ANR PQ: 0 ANSI: 5
kern :notice: [ +0.000464] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
kern :notice: [ +0.000014] sd 0:0:0:0: [sda] Write Protect is off
kern :debug : [ +0.000002] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
kern :notice: [ +0.000018] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
kern :info : [ +0.010628] sda: sda1 sda2 sda3 sda4
kern :notice: [ +0.000681] sd 0:0:0:0: [sda] Attached SCSI disk
kern :info : [ +0.001437] Freeing unused decrypted memory: 2036K
kern :info : [ +0.000618] Freeing unused kernel image (initmem) memory: 1720K
kern :info : [ +0.032620] Write protecting the kernel read-only data: 22528k
kern :info : [ +0.001102] Freeing unused kernel image (text/rodata gap) memory: 2036K
kern :info : [ +0.000643] Freeing unused kernel image (rodata/data gap) memory: 1312K
kern :info : [ +0.091059] x86/mm: Checked W+X mappings: passed, no W+X pages found.
kern :info : [ +0.000004] rodata_test: all tests were successful
kern :info : [ +0.000002] x86/mm: Checking user space page tables
kern :info : [ +0.042676] x86/mm: Checked W+X mappings: passed, no W+X pages found.
kern :info : [ +0.000006] Run /init as init process
kern :debug : [ +0.000001] with arguments:
kern :debug : [ +0.000001] /init
kern :debug : [ +0.000001] splash
kern :debug : [ +0.000000] with environment:
kern :debug : [ +0.000001] HOME=/
kern :debug : [ +0.000000] TERM=linux
kern :debug : [ +0.000001] BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
kern :warn : [ +0.540193] xhci_hcd 0000:00:14.0: can’t derive routing for PCI INT A
kern :warn : [ +0.000003] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
kern :info : [ +0.000032] xhci_hcd 0000:00:14.0: xHCI Host Controller
kern :info : [ +0.000007] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 9
kern :info : [ +0.001076] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
kern :info : [ +0.000009] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
kern :info : [ +0.000163] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
kern :info : [ +0.000002] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ +0.000001] usb usb9: Product: xHCI Host Controller
kern :info : [ +0.000002] usb usb9: Manufacturer: Linux 5.10.7-3-MANJARO xhci-hcd
kern :info : [ +0.000001] usb usb9: SerialNumber: 0000:00:14.0
kern :info : [ +0.000173] hub 9-0:1.0: USB hub found
kern :info : [ +0.000015] hub 9-0:1.0: 4 ports detected
kern :info : [ +0.000249] xhci_hcd 0000:00:14.0: xHCI Host Controller
kern :info : [ +0.000003] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 10
kern :info : [ +0.000002] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
kern :info : [ +0.000044] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
kern :info : [ +0.000002] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
kern :info : [ +0.000001] usb usb10: Product: xHCI Host Controller
kern :info : [ +0.000001] usb usb10: Manufacturer: Linux 5.10.7-3-MANJARO xhci-hcd
kern :info : [ +0.000001] usb usb10: SerialNumber: 0000:00:14.0
kern :info : [ +0.000102] hub 10-0:1.0: USB hub found
kern :info : [ +0.000140] hub 10-0:1.0: 4 ports detected
kern :info : [ +0.004902] input: Apple Inc. Display Audio as /devices/pci0000:00/0000:00:01.1/0000:05:00.0/0000:06:03.0/0000:08:00.0/0000:09:00.0/0000:0a:00.0/0000:0b:03.0/0000:0c:00.2/usb3/3-1/3-1.4/3-1.4:1.3/0003:05AC:1107.0001/input/input4
kern :info : [ +0.000067] hid-generic 0003:05AC:1107.0001: input,hidraw0: USB HID v1.11 Device [Apple Inc. Display Audio] on usb-0000:0c:00.2-1.4/input3
kern :info : [ +0.000934] sdhci: Secure Digital Host Controller Interface driver
kern :info : [ +0.000002] sdhci: Copyright(c) Pierre Ossman
kern :info : [ +0.002787] sdhci-pci 0000:03:00.1: SDHCI controller found [14e4:16bc] (rev 10)
kern :info : [ +0.000560] mmc0: SDHCI controller on PCI [0000:03:00.1] using ADMA 64-bit
kern :info : [ +0.006419] input: Apple Inc. Display Audio as /devices/pci0000:00/0000:00:01.1/0000:05:00.0/0000:06:04.0/0000:39:00.0/0000:3a:00.0/0000:3b:00.0/0000:3c:03.0/0000:3d:00.2/usb4/4-1/4-1.4/4-1.4:1.3/0003:05AC:1107.0002/input/input5
kern :info : [ +0.000084] hid-generic 0003:05AC:1107.0002: input,hidraw1: USB HID v1.11 Device [Apple Inc. Display Audio] on usb-0000:3d:00.2-1.4/input3
kern :info : [ +0.001543] hid-generic 0003:05AC:9227.0003: hiddev96,hidraw2: USB HID v1.11 Device [Apple Inc. Apple Thunderbolt Display] on usb-0000:0c:00.2-1.7/input0
kern :info : [ +0.001491] hid-generic 0003:05AC:9227.0004: hiddev97,hidraw3: USB HID v1.11 Device [Apple Inc. Apple Thunderbolt Display] on usb-0000:3d:00.2-1.7/input0
kern :info : [ +0.005743] input: HID 05ac:820a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.1/2-1.8.1.1:1.0/0003:05AC:820A.0007/input/input6
kern :notice: [ +0.027801] firewire_ohci 0000:0e:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0, physUB
kern :info : [ +0.026776] hid-generic 0003:05AC:820A.0007: input,hidraw4: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1d.0-1.8.1.1/input0
kern :info : [ +0.001104] input: HID 05ac:820b as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.2/2-1.8.1.2:1.0/0003:05AC:820B.0008/input/input7
kern :info : [ +0.000151] hid-generic 0003:05AC:820B.0008: input,hidraw5: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1d.0-1.8.1.2/input0
kern :info : [ +0.000044] usbcore: registered new interface driver usbhid
kern :info : [ +0.000001] usbhid: USB HID core driver
kern :info : [ +0.002359] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:05AC:0262.0005/input/input8
kern :notice: [ +0.026312] firewire_ohci 0000:3f:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0, physUB
kern :info : [ +0.030214] apple 0003:05AC:0262.0005: input,hidraw6: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-1.8.2/input0
kern :info : [ +0.000193] apple 0003:05AC:0262.0006: hidraw7: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-1.8.2/input1
kern :info : [ +0.070896] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
kern :info : [ +0.121840] usb 9-1: new full-speed USB device number 2 using xhci_hcd
daemon:info : [ +0.068843] systemd[1]: systemd 247.2-1-manjaro running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
daemon:info : [ +0.014797] systemd[1]: Detected architecture x86-64.
daemon:info : [ +0.041744] systemd[1]: Set hostname to .
kern :info : [ +0.017486] usb 9-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
kern :info : [ +0.000006] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
kern :info : [ +0.000003] usb 9-1: Product: USB Receiver
kern :info : [ +0.000003] usb 9-1: Manufacturer: Logitech
kern :info : [ +0.002941] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.0/0003:046D:C52B.0009/input/input9
kern :info : [ +0.054449] hid-generic 0003:046D:C52B.0009: input,hidraw8: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
kern :info : [ +0.002579] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.1/0003:046D:C52B.000A/input/input10
kern :info : [ +0.000166] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.1/0003:046D:C52B.000A/input/input11
kern :notice: [ +0.040389] firewire_core 0000:0e:00.0: created device fw0: GUID 000a270200501872, S800
kern :notice: [ +0.000011] firewire_core 0000:0e:00.0: phy config: new root=ffc0, gap_count=63
kern :info : [ +0.013350] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.1/0003:046D:C52B.000A/input/input12
kern :info : [ +0.000161] hid-generic 0003:046D:C52B.000A: input,hiddev98,hidraw9: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
kern :info : [ +0.001915] hid-generic 0003:046D:C52B.000B: hiddev99,hidraw10: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
kern :notice: [ +0.038027] firewire_core 0000:3f:00.0: created device fw1: GUID 000a27020043856c, S800
kern :notice: [ +0.000020] firewire_core 0000:3f:00.0: phy config: new root=ffc0, gap_count=63
daemon:warn : [ +0.169573] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd’s process lifecycle management for the service. Please update your service to use a safer KillMode=, such as ‘mixed’ or ‘control-group’. Support for KillMode=none is deprecated and will eventually be removed.
daemon:info : [ +0.043794] systemd[1]: Queued start job for default target Graphical Interface.
daemon:info : [ +0.009496] systemd[1]: Created slice system-getty.slice.
daemon:info : [ +0.000265] systemd[1]: Created slice system-modprobe.slice.
daemon:info : [ +0.000207] systemd[1]: Created slice system-systemd\x2dfsck.slice.
daemon:info : [ +0.000212] systemd[1]: Created slice User and Session Slice.
daemon:info : [ +0.000049] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
daemon:info : [ +0.000117] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
daemon:info : [ +0.000028] systemd[1]: Reached target Login Prompts.
daemon:info : [ +0.000017] systemd[1]: Reached target Remote File Systems.
daemon:info : [ +0.000007] systemd[1]: Reached target Slices.
daemon:info : [ +0.000062] systemd[1]: Listening on Device-mapper event daemon FIFOs.
daemon:info : [ +0.000214] systemd[1]: Listening on LVM2 metadata daemon socket.
daemon:info : [ +0.000318] systemd[1]: Listening on LVM2 poll daemon socket.
daemon:info : [ +0.000872] systemd[1]: Listening on Process Core Dump Socket.
daemon:info : [ +0.000120] systemd[1]: Listening on Journal Audit Socket.
daemon:info : [ +0.000074] systemd[1]: Listening on Journal Socket (/dev/log).
daemon:info : [ +0.000088] systemd[1]: Listening on Journal Socket.
daemon:info : [ +0.001415] systemd[1]: Listening on udev Control Socket.
daemon:info : [ +0.000079] systemd[1]: Listening on udev Kernel Socket.
daemon:info : [ +0.000662] systemd[1]: Mounting Huge Pages File System…
daemon:info : [ +0.000728] systemd[1]: Mounting POSIX Message Queue File System…
daemon:info : [ +0.000713] systemd[1]: Mounting Kernel Debug File System…
daemon:info : [ +0.000704] systemd[1]: Mounting Kernel Trace File System…
daemon:info : [ +0.000929] systemd[1]: Starting Load AppArmor profiles…
daemon:info : [ +0.000760] systemd[1]: Starting Create list of static device nodes for the current kernel…
daemon:info : [ +0.000663] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling…
daemon:info : [ +0.000705] systemd[1]: Starting Load Kernel Module configfs…
daemon:info : [ +0.000804] systemd[1]: Starting Load Kernel Module drm…
daemon:info : [ +0.000707] systemd[1]: Starting Load Kernel Module fuse…
daemon:info : [ +0.002578] systemd[1]: Starting Set Up Additional Binary Formats…
daemon:info : [ +0.000634] systemd[1]: Starting File System Check on Root Device…
daemon:info : [ +0.001330] systemd[1]: Starting Journal Service…
daemon:info : [ +0.001359] systemd[1]: Starting Load Kernel Modules…
daemon:info : [ +0.000083] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
daemon:info : [ +0.001037] systemd[1]: Starting Coldplug All udev Devices…
daemon:info : [ +0.001011] systemd[1]: Starting Setup Virtual Console…
kern :info : [ +0.001730] Linux agpgart interface v0.103
daemon:info : [ +0.000531] systemd[1]: Mounted Huge Pages File System.
daemon:info : [ +0.000136] systemd[1]: Mounted POSIX Message Queue File System.
daemon:info : [ +0.000117] systemd[1]: Mounted Kernel Debug File System.
daemon:info : [ +0.000118] systemd[1]: Mounted Kernel Trace File System.
daemon:info : [ +0.000539] systemd[1]: Finished Create list of static device nodes for the current kernel.
daemon:info : [ +0.000316] systemd[1]: modprobe@configfs.service: Succeeded.
daemon:info : [ +0.000392] systemd[1]: Finished Load Kernel Module configfs.
daemon:info : [ +0.000151] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 284 (systemd-binfmt)
daemon:info : [ +0.001012] systemd[1]: Mounting Arbitrary Executable File Formats File System…
daemon:info : [ +0.001238] systemd[1]: Mounting Kernel Configuration File System…
daemon:info : [ +0.002451] systemd[1]: Mounted Kernel Configuration File System.
daemon:info : [ +0.001001] systemd[1]: Mounted Arbitrary Executable File Formats File System.
kern :info : [ +0.000768] fuse: init (API version 7.32)
daemon:info : [ +0.000579] systemd[1]: modprobe@fuse.service: Succeeded.
daemon:info : [ +0.000299] systemd[1]: Finished Load Kernel Module fuse.
daemon:info : [ +0.000405] systemd[1]: Finished Set Up Additional Binary Formats.
daemon:info : [ +0.000784] systemd[1]: Mounting FUSE Control File System…
kern :notice: [ +0.000987] random: lvm: uninitialized urandom read (4 bytes read)
daemon:info : [ +0.000793] systemd[1]: Mounted FUSE Control File System.
kern :notice: [ +0.004668] sd 0:0:0:0: Attached scsi generic sg0 type 0
daemon:info : [ +0.007880] systemd[1]: Finished Load Kernel Modules.
kern :notice: [ +0.000046] audit: type=1130 audit(1612820039.654:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-modules-load comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
daemon:info : [ +0.000825] systemd[1]: Starting Apply Kernel Variables…
daemon:info : [ +0.005420] systemd[1]: modprobe@drm.service: Succeeded.
daemon:info : [ +0.000731] systemd[1]: Finished Load Kernel Module drm.
kern :notice: [ +0.000089] audit: type=1130 audit(1612820039.664:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=modprobe@drm comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.000045] audit: type=1131 audit(1612820039.664:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=modprobe@drm comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
daemon:info : [ +0.002703] systemd[1]: Finished File System Check on Root Device.
kern :notice: [ +0.000041] audit: type=1130 audit(1612820039.664:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-fsck-root comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
daemon:info : [ +0.000601] systemd[1]: Finished Apply Kernel Variables.
kern :notice: [ +0.000039] audit: type=1130 audit(1612820039.667:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-sysctl comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
daemon:info : [ +0.001097] systemd[1]: Starting Remount Root and Kernel File Systems…
daemon:info : [ +0.006335] systemd[1]: Starting CLI Netfilter Manager…
kern :info : [ +0.001458] EXT4-fs (sda4): re-mounted. Opts: (null)
daemon:info : [ +0.001596] systemd[1]: Finished Remount Root and Kernel File Systems.
kern :notice: [ +0.000065] audit: type=1130 audit(1612820039.677:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-remount-fs comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
daemon:info : [ +0.000143] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
daemon:info : [ +0.008152] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
daemon:info : [ +0.002807] systemd[1]: Starting Load/Save Random Seed…
daemon:info : [ +0.000079] systemd[1]: Condition check resulted in Create System Users being skipped.
daemon:info : [ +0.000915] systemd[1]: Starting Create Static Device Nodes in /dev…
daemon:info : [ +0.006552] systemd[1]: Finished Setup Virtual Console.
kern :notice: [ +0.000052] audit: type=1130 audit(1612820039.694:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-vconsole-setup comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
daemon:info : [ +0.011790] systemd[1]: Finished CLI Netfilter Manager.
kern :notice: [ +0.000047] audit: type=1130 audit(1612820039.707:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=ufw comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
daemon:info : [ +0.002531] systemd[1]: Finished Create Static Device Nodes in /dev.
kern :notice: [ +0.000035] audit: type=1130 audit(1612820039.711:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-tmpfiles-setup-dev comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.001015] audit: type=1334 audit(1612820039.711:11): prog-id=5 op=LOAD
daemon:info : [ +0.000526] systemd[1]: Starting Rule-based Manager for Device Events and Files…
daemon:info : [ +0.037581] systemd[1]: Finished Coldplug All udev Devices.
daemon:info : [ +0.053185] systemd[1]: Started Journal Service.
kern :info : [ +0.134696] apple_gmux: Found gmux version 3.2.19 [indexed]
kern :info : [ +0.019499] smbus_hc ACPI0001:00: SBS HC: offset = 0x20, query_bit = 0x10
kern :notice: [ +0.036296] random: mktemp: uninitialized urandom read (6 bytes read)
kern :notice: [ +0.003236] random: mktemp: uninitialized urandom read (6 bytes read)
kern :info : [ +0.113357] bcma-pci-bridge 0000:04:00.0: bus0: Found chip with id 0x4331, rev 0x02 and package 0x09
kern :info : [ +0.000034] bcma-pci-bridge 0000:04:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
kern :info : [ +0.000026] bcma-pci-bridge 0000:04:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0)
kern :info : [ +0.000053] bcma-pci-bridge 0000:04:00.0: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0)
kern :warn : [ +0.003864] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200925/utaddress-204)
kern :info : [ +0.000007] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
kern :warn : [ +0.000003] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200925/utaddress-204)
kern :info : [ +0.000005] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
kern :warn : [ +0.000001] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200925/utaddress-204)
kern :info : [ +0.000004] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
kern :warn : [ +0.000001] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200925/utaddress-204)
kern :info : [ +0.000004] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
kern :warn : [ +0.000000] lpc_ich: Resource conflict(s) found affecting gpio_ich
kern :info : [ +0.003762] input: PC Speaker as /devices/platform/pcspkr/input/input14
kern :info : [ +0.007919] i801_smbus 0000:00:1f.3: enabling device (0000 → 0003)
kern :info : [ +0.000184] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
kern :info : [ +0.000268] i2c i2c-0: 2/2 memory slots populated (from DMI)
kern :info : [ +0.047534] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present)
kern :info : [ +0.007340] tg3 0000:0d:00.0 eth0: Tigon3 [partno(BCM957761) rev 57785100] (PCI Express) MAC address a8:20:66:4a:1b:dd
kern :info : [ +0.000005] tg3 0000:0d:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
kern :info : [ +0.000002] tg3 0000:0d:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
kern :info : [ +0.000001] tg3 0000:0d:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
kern :info : [ +0.002603] bcma-pci-bridge 0000:04:00.0: bus0: Bus registered
kern :info : [ +0.003748] Adding 15612924k swap on /dev/sda3. Priority:-2 extents:1 across:15612924k SSFS
kern :info : [ +0.111540] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
kern :info : [ +0.000003] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
kern :info : [ +0.000001] RAPL PMU: hw unit of domain package 2^-16 Joules
kern :info : [ +0.000002] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
kern :info : [ +0.030357] tg3 0000:3e:00.0 eth1: Tigon3 [partno(BCM957761) rev 57785100] (PCI Express) MAC address 40:6c:8f:19:32:e7
kern :info : [ +0.000004] tg3 0000:3e:00.0 eth1: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
kern :info : [ +0.000002] tg3 0000:3e:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
kern :info : [ +0.000002] tg3 0000:3e:00.0 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
kern :info : [ +0.041010] loop: module loaded
kern :info : [ +0.015104] cryptd: max_cpu_qlen set to 1000
kern :info : [ +0.019361] AVX version of gcm_enc/dec engaged.
kern :info : [ +0.000003] AES CTR mode by8 optimization enabled
kern :info : [ +0.054665] tg3 0000:0d:00.0 enp13s0: renamed from eth0
kern :info : [ +0.003308] applesmc: key=493 fan=2 temp=44 index=43 acc=0 lux=2 kbd=1
kern :warn : [ +0.000204] applesmc applesmc.768: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
kern :info : [ +0.022635] iTCO_vendor_support: vendor-support=0
kern :info : [ +0.034301] tg3 0000:3e:00.0 enp62s0: renamed from eth1
kern :info : [ +0.010277] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
kern :info : [ +0.000054] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
kern :debug : [ +0.000109] checking generic (90020000 1680000) vs hw (c1400000 400000)
kern :debug : [ +0.000002] checking generic (90020000 1680000) vs hw (b0000000 10000000)
kern :info : [ +0.051786] i915 0000:00:02.0: BAR 6: can’t assign [??? 0x00000000 flags 0x20000000] (bogus alignment)
kern :info : [ +0.000004] i915 0000:00:02.0: [drm] Failed to find VBIOS tables (VBT)
kern :info : [ +0.000394] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
kern :warn : [ +0.066310] ACPI Warning: _SB.PCI0.IGPU.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200925/nsarguments-61)
kern :info : [ +0.000029] ACPI: _SB.PCI0.IGPU: failed to evaluate _DSM
kern :warn : [ +0.000031] ACPI Warning: _SB.PCI0.P0P2.GFX0.DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200925/nsarguments-61)
kern :info : [ +0.000024] ACPI: _SB.PCI0.P0P2.GFX0: failed to evaluate _DSM
kern :info : [ +0.000055] nouveau 0000:01:00.0: enabling device (0006 → 0007)
kern :debug : [ +0.000175] checking generic (90020000 1680000) vs hw (c0000000 1000000)
kern :debug : [ +0.000002] checking generic (90020000 1680000) vs hw (90000000 10000000)
kern :info : [ +0.000001] fb0: switching to nouveaufb from EFI VGA
kern :info : [ +0.000107] nouveau 0000:01:00.0: vgaarb: deactivate vga console
kern :info : [ +0.000076] nouveau 0000:01:00.0: NVIDIA GK107 (0e7150a2)
kern :info : [ +0.007450] snd_hda_intel 0000:00:1b.0: enabling device (0000 → 0002)
kern :info : [ +0.003706] snd_hda_intel 0000:01:00.1: enabling device (0000 → 0002)
kern :info : [ +0.000064] snd_hda_intel 0000:01:00.1: Disabling MSI
kern :info : [ +0.000006] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
kern :info : [ +0.007973] i915 0000:00:02.0: [drm] failed to retrieve link info, disabling eDP
kern :info : [ +0.006418] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
kern :warn : [ +0.000241] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
kern :info : [ +0.000044] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
kern :info : [ +0.000173] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input15
kern :info : [ +0.000757] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
kern :info : [ +0.000138] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input16
kern :info : [ +0.000273] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
kern :info : [ +0.006812] nouveau 0000:01:00.0: bios: version 80.07.26.04.01
kern :info : [ +0.011844] nouveau 0000:01:00.0: fb: 1024 MiB GDDR5
kern :info : [ +0.015165] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
kern :info : [ +0.000056] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
kern :info : [ +0.000047] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
kern :info : [ +0.000044] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
kern :info : [ +0.000051] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
kern :info : [ +0.000044] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
kern :notice: [Feb 8 15:34] cfg80211: Loading compiled-in X.509 certificates for regulatory database
kern :notice: [ +0.011000] random: crng init done
kern :notice: [ +0.000003] random: 7 urandom warning(s) missed due to ratelimiting
kern :notice: [ +0.029725] cfg80211: Loaded X.509 cert ‘sforshee: 00b28ddf47aef9cea7’
kern :info : [ +0.013496] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
kern :info : [ +0.003139] vga_switcheroo: enabled
kern :info : [ +0.000163] [TTM] Zone kernel: Available graphics memory: 8149380 KiB
kern :info : [ +0.000002] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
kern :info : [ +0.000001] [TTM] Initializing pool allocator
kern :info : [ +0.000006] [TTM] Initializing DMA pool allocator
kern :info : [ +0.000036] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
kern :info : [ +0.000002] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
kern :info : [ +0.000005] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
kern :info : [ +0.000002] nouveau 0000:01:00.0: DRM: DCB version 4.0
kern :info : [ +0.000002] nouveau 0000:01:00.0: DRM: DCB outp 00: 048101b6 0f230010
kern :info : [ +0.000002] nouveau 0000:01:00.0: DRM: DCB outp 01: 018212d6 0f220020
kern :info : [ +0.000002] nouveau 0000:01:00.0: DRM: DCB outp 02: 01021212 00020020
kern :info : [ +0.000001] nouveau 0000:01:00.0: DRM: DCB outp 03: 088324c6 0f220010
kern :info : [ +0.000002] nouveau 0000:01:00.0: DRM: DCB outp 04: 08032402 00020010
kern :info : [ +0.000001] nouveau 0000:01:00.0: DRM: DCB outp 05: 02843862 00020010
kern :info : [ +0.000002] nouveau 0000:01:00.0: DRM: DCB conn 00: 00020047
kern :info : [ +0.000002] nouveau 0000:01:00.0: DRM: DCB conn 01: 02208146
kern :info : [ +0.000001] nouveau 0000:01:00.0: DRM: DCB conn 02: 01104246
kern :info : [ +0.000002] nouveau 0000:01:00.0: DRM: DCB conn 03: 00410361
kern :info : [ +0.002819] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
kern :info : [ +0.061874] squashfs: version 4.0 (2009/01/31) Phillip Lougher
kern :info : [ +0.034749] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
kern :info : [ +0.028215] snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS4206: line_outs=2 (0xb/0xa/0x0/0x0/0x0) type:speaker
kern :info : [ +0.000004] snd_hda_codec_cirrus hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
kern :info : [ +0.000002] snd_hda_codec_cirrus hdaudioC0D0: hp_outs=1 (0x9/0x0/0x0/0x0/0x0)
kern :info : [ +0.000002] snd_hda_codec_cirrus hdaudioC0D0: mono: mono_out=0x0
kern :info : [ +0.000001] snd_hda_codec_cirrus hdaudioC0D0: dig-out=0x10/0x0
kern :info : [ +0.000002] snd_hda_codec_cirrus hdaudioC0D0: inputs:
kern :info : [ +0.000002] snd_hda_codec_cirrus hdaudioC0D0: Mic=0xe
kern :info : [ +0.000834] intel_rapl_common: Found RAPL domain package
kern :info : [ +0.000002] intel_rapl_common: Found RAPL domain core
kern :info : [ +0.000001] intel_rapl_common: Found RAPL domain uncore
kern :info : [ +0.007280] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
kern :info : [ +0.014744] thunderbolt 0-1: new device found, vendor=0x1 device=0x8002
kern :info : [ +0.000002] thunderbolt 0-1: Apple, Inc. Thunderbolt Display
kern :info : [ +0.019797] b43-phy0: Broadcom 4331 WLAN found (core revision 29)
kern :info : [ +0.000412] b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1
kern :info : [ +0.000012] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
kern :warn : [ +0.000001] b43-phy0 warning: 5 GHz band is unsupported on this PHY
kern :info : [ +0.000526] Broadcom 43xx driver loaded [ Features: PNLS ]
kern :debug : [ +0.001533] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’
kern :info : [ +0.005080] b43 bcma0:1 wlp4s0b1: renamed from wlan0
kern :info : [ +0.155800] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
kern :info : [ +0.119308] nouveau 0000:01:00.0: DRM: allocated 2880x1800 fb: 0xa0000, bo 00000000bc7385e3
kern :info : [ +0.000057] fbcon: nouveaudrmfb (fb0) is primary device
kern :info : [ +0.000001] fbcon: Deferring console take-over
kern :info : [ +0.000003] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
kern :info : [ +0.033434] nouveau 0000:01:00.0: DRM: Apple GMUX detected: not registering Nouveau backlight interface
kern :info : [ +0.000153] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
kern :info : [ +0.071531] usbcore: registered new device driver apple-mfi-fastcharge
kern :info : [ +0.180125] thunderbolt 0-3: new device found, vendor=0x1 device=0x8002
kern :info : [ +0.000003] thunderbolt 0-3: Apple, Inc. Thunderbolt Display
kern :info : [ +0.078327] logitech-djreceiver 0003:046D:C52B.000B: hiddev98,hidraw8: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
kern :info : [ +0.118622] input: Logitech Wireless Device PID:400f Keyboard as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.2/0003:046D:C52B.000B/0003:046D:400F.000C/input/input24
kern :info : [ +0.000262] input: Logitech Wireless Device PID:400f Consumer Control as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.2/0003:046D:C52B.000B/0003:046D:400F.000C/input/input25
kern :info : [ +0.000065] hid-generic 0003:046D:400F.000C: input,hidraw9: USB HID v1.11 Keyboard [Logitech Wireless Device PID:400f] on usb-0000:00:14.0-1/input2:1
kern :info : [ +0.001622] input: Logitech Wireless Device PID:4082 Keyboard as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.2/0003:046D:C52B.000B/0003:046D:4082.000D/input/input29
kern :info : [ +0.000229] input: Logitech Wireless Device PID:4082 Mouse as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.2/0003:046D:C52B.000B/0003:046D:4082.000D/input/input30
kern :info : [ +0.000064] hid-generic 0003:046D:4082.000D: input,hidraw10: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4082] on usb-0000:00:14.0-1/input2:2
kern :info : [ +0.002062] input: Logitech Wireless Device PID:4082 Keyboard as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.2/0003:046D:C52B.000B/0003:046D:4082.000E/input/input34
kern :info : [ +0.000644] input: Logitech Wireless Device PID:4082 Mouse as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.2/0003:046D:C52B.000B/0003:046D:4082.000E/input/input35
kern :info : [ +0.000059] hid-generic 0003:046D:4082.000E: input,hidraw11: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4082] on usb-0000:00:14.0-1/input2:3
kern :info : [ +0.001031] mousedev: PS/2 mouse device common for all mice
kern :info : [ +0.208477] mc: Linux media interface: v0.10
kern :info : [ +0.025320] input: Logitech K750 as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.2/0003:046D:C52B.000B/0003:046D:400F.000C/input/input39
kern :info : [ +0.000219] logitech-hidpp-device 0003:046D:400F.000C: input,hidraw9: USB HID v1.11 Keyboard [Logitech K750] on usb-0000:00:14.0-1/input2:1
kern :info : [ +0.001592] videodev: Linux video capture interface: v2.00
kern :info : [ +0.024724] uvcvideo: Found UVC 1.00 device FaceTime HD Camera (Built-in) (05ac:8510)
kern :info : [ +0.043922] input: FaceTime HD Camera (Built-in): as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input40
kern :info : [ +0.080003] uvcvideo: Found UVC 1.00 device FaceTime HD Camera (Display) (05ac:1112)
kern :info : [ +0.003551] input: Logitech MX Master 3 as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.2/0003:046D:C52B.000B/0003:046D:4082.000D/input/input41
kern :info : [ +0.000591] logitech-hidpp-device 0003:046D:4082.000D: input,hidraw10: USB HID v1.11 Keyboard [Logitech MX Master 3] on usb-0000:00:14.0-1/input2:2
kern :info : [ +0.020432] input: FaceTime HD Camera (Display): F as /devices/pci0000:00/0000:00:01.1/0000:05:00.0/0000:06:03.0/0000:08:00.0/0000:09:00.0/0000:0a:00.0/0000:0b:03.0/0000:0c:00.2/usb3/3-1/3-1.5/3-1.5:1.0/input/input42
kern :err : [ +0.008584] usb 3-1.4: 1:1: cannot get freq at ep 0x4
kern :err : [ +0.004033] usb 3-1.4: 1:2: cannot get freq at ep 0x4
kern :err : [ +0.005978] usb 3-1.4: 2:1: cannot get freq at ep 0x84
kern :warn : [ +0.032961] usb 3-1.4: Warning! Unlikely big volume range (=16384), cval->res is probably wrong.
kern :warn : [ +0.000003] usb 3-1.4: [2] FU [PCM Playback Volume] ch = 2, val = -16384/0/1
kern :warn : [ +0.031902] usb 3-1.4: Warning! Unlikely big volume range (=15872), cval->res is probably wrong.
kern :warn : [ +0.000007] usb 3-1.4: [5] FU [Mic Capture Volume] ch = 1, val = -11264/4608/1
kern :info : [ +0.081433] input: Logitech MX Master 3 as /devices/pci0000:00/0000:00:14.0/usb9/9-1/9-1:1.2/0003:046D:C52B.000B/0003:046D:4082.000E/input/input43
kern :info : [ +0.000322] uvcvideo: Found UVC 1.00 device FaceTime HD Camera (Display) (05ac:1112)
kern :info : [ +0.000120] logitech-hidpp-device 0003:046D:4082.000E: input,hidraw11: USB HID v1.11 Keyboard [Logitech MX Master 3] on usb-0000:00:14.0-1/input2:3
kern :info : [ +0.026686] input: FaceTime HD Camera (Display): F as /devices/pci0000:00/0000:00:01.1/0000:05:00.0/0000:06:04.0/0000:39:00.0/0000:3a:00.0/0000:3b:00.0/0000:3c:03.0/0000:3d:00.2/usb4/4-1/4-1.5/4-1.5:1.0/input/input44
kern :info : [ +0.000186] usbcore: registered new interface driver uvcvideo
kern :info : [ +0.000001] USB Video Class driver (1.1.1)
kern :err : [ +0.068090] usb 4-1.4: 1:1: cannot get freq at ep 0x4
kern :err : [ +0.004013] usb 4-1.4: 1:2: cannot get freq at ep 0x4
kern :err : [ +0.005077] usb 4-1.4: 2:1: cannot get freq at ep 0x84
kern :warn : [ +0.032973] usb 4-1.4: Warning! Unlikely big volume range (=16384), cval->res is probably wrong.
kern :warn : [ +0.000002] usb 4-1.4: [2] FU [PCM Playback Volume] ch = 2, val = -16384/0/1
kern :warn : [ +0.033001] usb 4-1.4: Warning! Unlikely big volume range (=15872), cval->res is probably wrong.
kern :warn : [ +0.000007] usb 4-1.4: [5] FU [Mic Capture Volume] ch = 1, val = -11264/4608/1
kern :info : [ +0.000691] usbcore: registered new interface driver snd-usb-audio
kern :info : [ +0.042577] input: bcm5974 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.2/input/input45
kern :info : [ +0.000114] usbcore: registered new interface driver bcm5974
kern :info : [ +0.626708] Bluetooth: Core ver 2.22
kern :info : [ +0.000028] NET: Registered protocol family 31
kern :info : [ +0.000001] Bluetooth: HCI device and connection manager initialized
kern :info : [ +0.000003] Bluetooth: HCI socket layer initialized
kern :info : [ +0.000002] Bluetooth: L2CAP socket layer initialized
kern :info : [ +0.000012] Bluetooth: SCO socket layer initialized
kern :info : [ +0.015187] usbcore: registered new interface driver btusb
kern :info : [ +0.041020] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
kern :info : [ +0.000002] Bluetooth: BNEP filters: protocol multicast
kern :info : [ +0.000003] Bluetooth: BNEP socket layer initialized
kern :info : [ +0.021709] usb 2-1.8.1.1: USB disconnect, device number 6
kern :info : [ +0.047388] Bluetooth: hci0: BCM: chip id 63 build 1822
kern :info : [ +0.000988] Bluetooth: hci0: BCM: product 05ac:8286
kern :info : [ +0.001000] Bluetooth: hci0: BCM: features 0x07
kern :info : [ +0.016036] Bluetooth: hci0: manjaro
kern :info : [ +0.057120] NET: Registered protocol family 38
kern :info : [ +0.097116] usb 2-1.8.1.2: USB disconnect, device number 7
kern :warn : [ +1.328991] kauditd_printk_skb: 82 callbacks suppressed
kern :notice: [ +0.000002] audit: type=1130 audit(1612820044.774:92): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=accounts-daemon comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.040520] audit: type=1100 audit(1612820044.814:93): pid=1832 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘op=PAM:authentication grantors=pam_shells,pam_permit acct=“bryankarlan” exe="/usr/lib/gdm-session-worker" hostname=manjaro addr=? terminal=/dev/tty1 res=success’
kern :notice: [ +0.002810] audit: type=1101 audit(1612820044.817:94): pid=1832 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct=“bryankarlan” exe="/usr/lib/gdm-session-worker" hostname=manjaro addr=? terminal=/dev/tty1 res=success’
kern :notice: [ +0.001891] audit: type=1103 audit(1612820044.821:95): pid=1832 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘op=PAM:setcred grantors=pam_shells,pam_permit acct=“bryankarlan” exe="/usr/lib/gdm-session-worker" hostname=manjaro addr=? terminal=/dev/tty1 res=success’
kern :info : [ +0.008715] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
kern :notice: [ +0.002560] audit: type=1130 audit(1612820044.831:96): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=snapd comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.042332] audit: type=1006 audit(1612820044.874:97): pid=1832 uid=0 subj==unconfined old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
kern :notice: [ +0.025913] audit: type=1130 audit(1612820044.901:98): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=user-runtime-dir@1000 comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.005909] audit: type=1101 audit(1612820044.907:99): pid=1843 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct=“bryankarlan” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.000033] audit: type=1103 audit(1612820044.907:100): pid=1843 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘op=PAM:setcred grantors=? acct=“bryankarlan” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed’
kern :notice: [ +0.000054] audit: type=1006 audit(1612820044.907:101): pid=1843 uid=0 subj==unconfined old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
kern :info : [ +0.286521] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
kern :info : [ +1.806761] tg3 0000:0d:00.0 enp13s0: Link is up at 1000 Mbps, full duplex
kern :info : [ +0.000006] tg3 0000:0d:00.0 enp13s0: Flow control is on for TX and on for RX
kern :info : [ +0.000001] tg3 0000:0d:00.0 enp13s0: EEE is disabled
kern :info : [ +0.099996] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
kern :info : [ +0.147224] IPv6: ADDRCONF(NETDEV_CHANGE): enp13s0: link becomes ready
kern :info : [ +1.497392] wlp4s0b1: authenticate with 20:f3:75:c4:c3:8d
kern :info : [ +0.052137] wlp4s0b1: send auth to 20:f3:75:c4:c3:8d (try 1/3)
kern :info : [ +0.001116] wlp4s0b1: authenticated
kern :info : [ +0.001983] wlp4s0b1: associate with 20:f3:75:c4:c3:8d (try 1/3)
kern :info : [ +0.203339] wlp4s0b1: associate with 20:f3:75:c4:c3:8d (try 2/3)
kern :info : [ +0.001811] wlp4s0b1: RX AssocResp from 20:f3:75:c4:c3:8d (capab=0x831 status=0 aid=1)
kern :info : [ +0.000242] wlp4s0b1: associated
kern :info : [ +0.111896] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0b1: link becomes ready
kern :info : [ +0.120125] Bluetooth: RFCOMM TTY layer initialized
kern :info : [ +0.000007] Bluetooth: RFCOMM socket layer initialized
kern :info : [ +0.000006] Bluetooth: RFCOMM ver 1.11
kern :debug : [ +0.521044] rfkill: input handler disabled
kern :warn : [ +0.042108] kauditd_printk_skb: 12 callbacks suppressed
kern :notice: [ +0.000002] audit: type=1334 audit(1612820049.801:114): prog-id=14 op=LOAD
kern :notice: [ +0.000024] audit: type=1334 audit(1612820049.801:115): prog-id=15 op=LOAD
kern :notice: [ +0.015674] audit: type=1130 audit(1612820049.814:116): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=upower comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.049766] audit: type=1130 audit(1612820049.864:117): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-timedated comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +1.066989] audit: type=1130 audit(1612820050.931:118): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=fprintd comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.002443] audit: type=1100 audit(1612820050.934:119): pid=2415 uid=1000 auid=1000 ses=2 subj==unconfined msg=‘op=PAM:authentication grantors=? acct=“bryankarlan” exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=failed’
kern :notice: [ +0.817141] audit: type=1334 audit(1612820051.751:120): prog-id=16 op=LOAD
kern :notice: [ +0.000035] audit: type=1334 audit(1612820051.751:121): prog-id=17 op=LOAD
kern :notice: [ +0.076357] audit: type=1130 audit(1612820051.827:122): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-localed comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +1.922647] audit: type=1131 audit(1612820053.751:123): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=NetworkManager-dispatcher comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +12.012119] audit: type=1130 audit(1612820065.764:124): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=plymouth-quit-wait comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.534304] audit: type=1130 audit(1612820066.297:125): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=tlp comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +13.419067] audit: type=1131 audit(1612820079.880:126): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-timedated comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.021869] audit: type=1334 audit(1612820079.903:127): prog-id=15 op=UNLOAD
kern :notice: [ +0.000012] audit: type=1334 audit(1612820079.903:128): prog-id=14 op=UNLOAD
kern :notice: [ +0.856206] audit: type=1131 audit(1612820080.768:129): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=fprintd comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +1.065694] audit: type=1131 audit(1612820081.848:130): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-hostnamed comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.176641] audit: type=1334 audit(1612820082.030:131): prog-id=10 op=UNLOAD
kern :notice: [ +0.000019] audit: type=1334 audit(1612820082.030:132): prog-id=9 op=UNLOAD
kern :info : [ +3.022409] logitech-hidpp-device 0003:046D:400F.000C: HID++ 2.0 device connected.
kern :info : [ +2.618743] logitech-hidpp-device 0003:046D:4082.000D: HID++ 4.5 device connected.
kern :notice: [ +12.889851] audit: type=1334 audit(1612820100.636:133): prog-id=18 op=LOAD
kern :notice: [ +0.000096] audit: type=1334 audit(1612820100.636:134): prog-id=19 op=LOAD
kern :notice: [ +0.068706] audit: type=1130 audit(1612820100.703:135): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-hostnamed comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :warn : [ +0.097484] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and L1TF - L1 Terminal Fault — The Linux Kernel documentation for details.
kern :notice: [Feb 8 15:35] audit: type=1131 audit(1612820111.415:136): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-localed comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.088031] audit: type=1334 audit(1612820111.505:137): prog-id=17 op=UNLOAD
kern :notice: [ +0.000006] audit: type=1334 audit(1612820111.505:138): prog-id=16 op=UNLOAD
kern :notice: [ +19.228612] audit: type=1131 audit(1612820130.736:139): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=systemd-hostnamed comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +0.097136] audit: type=1334 audit(1612820130.836:140): prog-id=19 op=UNLOAD
…
…kern :notice: [ +0.000005] audit: type=1334 audit(1612820130.836:141): prog-id=18 op=UNLOAD
kern :info : [Feb 8 15:38] input: Bryan’s BeatsX (AVRCP) as /devices/virtual/input/input46
kern :notice: [Feb 8 15:39] audit: type=1130 audit(1612820363.025:142): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=fprintd comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +2.131558] audit: type=1100 audit(1612820365.158:143): pid=4949 uid=1000 auid=1000 ses=2 subj==unconfined msg=‘op=PAM:authentication grantors=pam_unix acct=“bryankarlan” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success’
kern :notice: [ +0.004634] audit: type=1101 audit(1612820365.162:144): pid=4949 uid=1000 auid=1000 ses=2 subj==unconfined msg=‘op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct=“bryankarlan” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success’
kern :notice: [ +0.000006] audit: type=1110 audit(1612820365.162:145): pid=4949 uid=1000 auid=1000 ses=2 subj==unconfined msg=‘op=PAM:setcred grantors=pam_unix acct=“root” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success’
kern :notice: [ +0.003540] audit: type=1105 audit(1612820365.165:146): pid=4949 uid=1000 auid=1000 ses=2 subj==unconfined msg=‘op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct=“root” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success’
kern :notice: [ +28.603909] audit: type=1131 audit(1612820393.768:147): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=fprintd comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :info : [Feb 8 15:40] input: Bryan’s BeatsX (AVRCP) as /devices/virtual/input/input47
kern :notice: [ +4.633121] audit: type=1106 audit(1612820433.564:148): pid=4949 uid=1000 auid=1000 ses=2 subj==unconfined msg=‘op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct=“root” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success’
kern :notice: [ +0.000062] audit: type=1104 audit(1612820433.564:149): pid=4949 uid=1000 auid=1000 ses=2 subj==unconfined msg=‘op=PAM:setcred grantors=pam_unix acct=“root” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success’
kern :notice: [ +7.900449] audit: type=1130 audit(1612820441.464:150): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=fprintd comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
kern :notice: [ +4.469528] audit: type=1100 audit(1612820445.934:151): pid=5190 uid=1000 auid=1000 ses=2 subj==unconfined msg=‘op=PAM:authentication grantors=pam_unix acct=“bryankarlan” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success’
kern :notice: [ +0.003007] audit: type=1101 audit(1612820445.937:152): pid=5190 uid=1000 auid=1000 ses=2 subj==unconfined msg=‘op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct=“bryankarlan” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success’
kern :notice: [ +0.000003] audit: type=1110 audit(1612820445.937:153): pid=5190 uid=1000 auid=1000 ses=2 subj==unconfined msg=‘op=PAM:setcred grantors=pam_unix acct=“root” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success’
kern :notice: [ +0.000790] audit: type=1105 audit(1612820445.937:154): pid=5190 uid=1000 auid=1000 ses=2 subj==unconfined msg=‘op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct=“root” exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success’
kern :notice: [Feb 8 15:41] audit: type=1131 audit(1612820471.768:155): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg=‘unit=fprintd comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
could you, perhaps, just post the last few bits/lines that keep changing while you connect/disconnect
instead of the whole thing
Please wrap your outputs with ``` before and after the outputs, else it’s unreadable.
Just an FYI, I finally got my Wifi working properly by installing the proper broadcom-wl adapter. There are about 15 in the repositories and some I had tried in the past disabled the wifi altogether. However, I was able to try linux510-broadcom-wl 6.30.223.271-34 and while before wifi would only connect and see my slower 2.4, and then it would be highly unreliable to the point of being worthless, now I’m getting 150Mbps from my office, which is what I should expect to get on my iphone in that location and I can see and connect to my 5ghz network. So the upshot of this is I came back to this thread and reviewed the recommended thread for Bluetooth on Arch and it said that Broadcom cards conflict with the bluetooth. So now that I have my wifi working I thought I’d try again to pair my headset. And now it not only pairs via the GUI it works, sort of. The headset works great and I can hear stereo on my BeatsX, but the input doesn’t see my mic on the beats headset. So I have audio but no mic.
Is there something wrong with your iPad? If your iPad has no sound on connecting, you should check up whether you are using the latest iOS version. If not, update your iOS system can fix the issue. Or you can use TunesKit iOS System Recovery to have a try.
Not sure what you are referring to. I’m not having trouble with my iPad. What I am having trouble is that while I can connect to my Beats X headphones, and can hear through them, the system doesn’t recognize the audio from the mic.
Worked for me