Bluetooth pair without clicking Connect available?

Hi, I’m new in manjaro. And I was wondering if the Bluetooth swift pair (Connecting automatically without going through the UI) was available on here. I’ve had it on windows before. Not sure what command to post. So didn’t. Sorry if I didn’t write anything basic.
here’s the code you asked

sudo inxi --admin --verbosity=7 --filter --no-host --width                                     ✔ 
[sudo] password for zareef: 
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = "",
        LC_ALL = (unset),
        LC_ADDRESS = "bn_BD",
        LC_IDENTIFICATION = "bn_BD",
        LC_MEASUREMENT = "bn_BD",
        LC_MONETARY = "bn_BD",
        LC_NAME = "bn_BD",
        LC_NUMERIC = "en_DE.UTF-8",
        LC_PAPER = "bn_BD",
        LC_TELEPHONE = "bn_BD",
        LC_TIME = "bn_BD",
        LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
System:
  Kernel: 6.1.11-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
    root=UUID=b2e1aee2-0506-48d8-a067-451af4f80aad rw quiet splash
    udev.log_priority=3
  Desktop: KDE Plasma v: 5.26.5 tk: Qt v: 5.15.8 wm: kwin_x11 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: HP product: HP Stream Laptop 14-cb1XX v: N/A
    serial: <filter> Chassis: type: 10 serial: <filter>
  Mobo: HP model: 84FB v: 97.20 serial: <filter> UEFI: Insyde v: F.19
    date: 07/21/2021
Battery:
  ID-1: BAT0 charge: 28.2 Wh (100.0%) condition: 28.2/28.2 Wh (100.0%)
    volts: 13.0 min: 11.6 model: HP Primary type: Li-ion serial: N/A status: full
Memory:
  RAM: total: 7.58 GiB used: 2.4 GiB (31.7%)
  Array-1: capacity: 16 GiB slots: 1 EC: None max-module-size: 16 GiB
    note: est.
  Device-1: Bottom type: DDR4 detail: synchronous size: 8 GiB
    speed: 2400 MT/s volts: N/A width (bits): data: 8 total: 8
    manufacturer: SK Hynix part-no: HMA81GS6DJR8N-XN serial: <filter>
CPU:
  Info: model: Intel Celeron N4000 socket: U3E1 bits: 64 type: MCP
    arch: Goldmont Plus level: v2 built: 2017 process: Intel 14nm family: 6
    model-id: 0x7A (122) stepping: 1 microcode: 0x3C
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 112 KiB
    desc: d-2x24 KiB; i-2x32 KiB L2: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 1194 min/max: 800/2600 base/boost: 1100/1100 scaling:
    driver: intel_cpufreq governor: schedutil volts: 0.7 V ext-clock: 100 MHz
    cores: 1: 1194 2: 1194 bogomips: 4378
  Flags: 3dnowprefetch acpi aes aperfmperf apic arat arch_capabilities
    arch_perfmon art bts cat_l2 cdp_l2 clflush clflushopt cmov constant_tsc
    cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts erms est fpu
    fsgsbase fxsr ht ibpb ibrs ibrs_enhanced ida intel_pt lahf_lm lm mca mce
    md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe
    pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts rdpid
    rdrand rdseed rdt_a rdtscp rep_good sdbg sep sha_ni smap smep ss ssbd sse
    sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tsc tsc_adjust
    tsc_deadline_timer tsc_known_freq umip vme x2apic xgetbv1 xsave xsavec
    xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
    filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel GeminiLake [UHD Graphics 600] vendor: Hewlett-Packard
    driver: i915 v: kernel arch: Gen-9 process: Intel 14n built: 2015-16 ports:
    active: eDP-1 empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0
    chip-ID: 8086:3185 class-ID: 0300
  Device-2: Cheng Uei Precision Industry (Foxlink) HP Webcam type: USB
    driver: uvcvideo bus-ID: 1-6:6 chip-ID: 05c8:022a class-ID: 0e02
    serial: <filter>
  Display: x11 server: X.Org v: 21.1.7 compositor: kwin_x11 driver: X:
    loaded: modesetting alternate: fbdev,vesa dri: iris gpu: i915 display-ID: :0
    screens: 1
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99")
    s-diag: 414mm (16.31")
  Monitor-1: eDP-1 model: BOE Display 0x0696 built: 2015 res: 1366x768 hz: 60
    dpi: 112 gamma: 1.2 size: 309x173mm (12.17x6.81") diag: 354mm (13.9")
    ratio: 16:9 modes: 1366x768
  API: OpenGL v: 4.6 Mesa 22.3.5 renderer: Mesa Intel UHD Graphics 600 (GLK
    2) direct-render: Yes
Audio:
  Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio
    vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
    alternate: snd_soc_skl,snd_soc_avs,snd_sof_pci_intel_apl bus-ID: 00:0e.0
    chip-ID: 8086:3198 class-ID: 0403
  Sound API: ALSA v: k6.1.11-1-MANJARO running: yes
  Sound Server-1: JACK v: 1.9.21 running: no
  Sound Server-2: PulseAudio v: 16.1 running: yes
  Sound Server-3: PipeWire v: 0.3.65 running: yes
Network:
  Message: No PCI device data found.
  Device-1: Realtek RTL8152 Fast Ethernet Adapter type: USB driver: r8152
    bus-ID: 1-2:3 chip-ID: 0bda:8152 class-ID: 0000 serial: <filter>
  IF: enp0s21f0u2 state: up speed: 100 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: Realtek RTL8188FTV 802.11b/g/n 1T1R 2.4G WLAN Adapter type: USB
    driver: N/A bus-ID: 1-3:4 chip-ID: 0bda:f179 class-ID: 0000 serial: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Realtek Bluetooth 4.2 Adapter type: USB driver: btusb v: 0.8
    bus-ID: 1-5:5 chip-ID: 0bda:b00b class-ID: e001 serial: <filter>
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 29.12 GiB used: 13.64 GiB (46.8%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: HP model: DF4032 size: 29.12 GiB
    block-size: physical: 512 B logical: 512 B type: SSD serial: <filter>
    rev: 0x8 scheme: GPT
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 28.82 GiB size: 28.2 GiB (97.85%) used: 13.64 GiB (48.4%)
    fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: N/A
    uuid: b2e1aee2-0506-48d8-a067-451af4f80aad
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 312 KiB (0.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1
    maj-min: 179:1 label: N/A uuid: DC15-5C53
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/mmcblk0boot0 maj-min: 179:8 size: 4 MiB fs: N/A label: N/A
    uuid: N/A
  ID-2: /dev/mmcblk0boot1 maj-min: 179:16 size: 4 MiB fs: N/A label: N/A
    uuid: N/A
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 9 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-1:2 info: HP Wireless Optical Comfort Mouse
    type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0
    speed: 12 Mb/s power: 100mA chip-ID: 03f0:a407 class-ID: 0301
  Device-2: 1-2:3 info: Realtek RTL8152 Fast Ethernet Adapter type: Network
    driver: r8152 interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 0bda:8152 class-ID: 0000 serial: <filter>
  Device-3: 1-3:4 info: Realtek RTL8188FTV 802.11b/g/n 1T1R 2.4G WLAN Adapter
    type: WiFi driver: N/A interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA
    chip-ID: 0bda:f179 class-ID: 0000 serial: <filter>
  Device-4: 1-5:5 info: Realtek Bluetooth 4.2 Adapter type: Bluetooth
    driver: btusb interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 500mA
    chip-ID: 0bda:b00b class-ID: e001 serial: <filter>
  Device-5: 1-6:6 info: Cheng Uei Precision Industry (Foxlink) HP Webcam
    type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s
    power: 500mA chip-ID: 05c8:022a class-ID: 0e02 serial: <filter>
  Hub-2: 2-0:1 info: Super-speed hub ports: 7 rev: 3.0 speed: 5 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 56.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 184 Uptime: 11m wakeups: 1 Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: pm: pacman
  pkgs: 1176 libs: 318 tools: pamac Shell: Zsh (sudo) v: 5.9 default: Bash
  v: 5.1.16 running-in: konsole inxi: 3.3.25

thanks.

Welcome to Manjaro! :smiling_face_with_three_hearts:

  1. Please read the information behind this link. It will help you to post necessary information.

[HowTo] Provide System Information

  1. Please press the three dots below your post and then press the :pencil2:
  • If you give us information about your system, we can see what we’re talking about and make better suggestions.
  • You can do this by using inxi in a terminal or in console.
sudo inxi --admin --verbosity=7 --filter --no-host --width
  • Personally identifiable information such as serial numbers and MAC addresses are filtered out by this command
  • Presenting the information in this way allows everyone to be familiar with the format and quickly find the items they need without missing anything.
  1. Copy the output from inxi (including the command) and paste it into your post.
  • To make it more readable, add 3 backticks ``` on an extra line before and after the pasted text.
    (Wisdom lies in reading :wink: )