Hey,
I was trying to get conky working and a borked my system. (just trying to make sure the zoom / matlab were using the correct graphics drivers)
Steps that this started with:
Removed linux519-nvidia-450xx, linux54-nvidia-450xx, nvidia-450xx-utils.
Did:
sudo mhwd -a pci nonfree 0300
Now upon boot two things are happening
- No screens found as per my xorg.log
- I cannot even switch ttyl shells, as it is constantly flashing
- as per the tutorial,
/etc/mkinitcpio.conf
has MODULES=""
Output from:
nxi --admin --verbosity=7
→
System:
Kernel: 5.16.5-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.16-x86_64
root=UUID=474207ab-201d-40dc-9f87-3c658fb59e30 rw quiet apparmor=1
security=apparmor udev.log_priority=3 intel_iommu=on iommu=pt
Desktop: GNOME 41.3 tk: GTK 3.24.31 wm: gnome-shell dm: GDM 41.3
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: P8Z68-V PRO GEN3 v: Rev 1.xx
serial: <superuser required> UEFI: American Megatrends v: 3802
date: 01/15/2015
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 15.59 GiB used: 1.29 GiB (8.3%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i5-2500K bits: 64 type: MCP arch: Sandy Bridge
family: 6 model-id: 0x2A (42) stepping: 7 microcode: 0x2F
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB
desc: 1x6 MiB
Speed (MHz): avg: 3047 high: 3344 min/max: 1600/3700 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 3344 2: 2934 3: 2976
4: 2934 bogomips: 26498
Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts clflush cmov
constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept est
flexpriority flush_l1d fpu fxsr ht ibpb ibrs ida lahf_lm lm mca mce
md_clear mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pcid
pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pti pts rdtscp rep_good
sep ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc
tsc_deadline_timer vme vmx vnmi vpid xsave xsaveopt xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA TU116 [GeForce GTX 1660 Ti] vendor: ASUSTeK driver: nvidia
v: 510.47.03 alternate: nouveau,nvidia_drm bus-ID: 01:00.0
chip-ID: 10de:2182 class-ID: 0300
Device-2: Logitech Webcam C310 type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 2-1.4:4 chip-ID: 046d:081b class-ID: 0102 serial: <filter>
Display: server: X.Org 1.21.1.3 driver: loaded: modesetting,nvidia
display-ID: localhost:11.0 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x572mm (40.0x22.5")
s-diag: 1166mm (45.9")
OpenGL: renderer: N/A v: N/A direct render: N/A
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio
vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:1c20 class-ID: 0403
Device-2: NVIDIA TU116 High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 01:00.1 chip-ID: 10de:1aeb
class-ID: 0403
Device-3: Logitech Webcam C310 type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 2-1.4:4 chip-ID: 046d:081b class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k5.16.5-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.20 running: no
Sound Server-3: PulseAudio v: 15.0 running: no
Sound Server-4: PipeWire v: 0.3.45 running: no
Network:
Device-1: Intel 82579V Gigabit Network vendor: ASUSTeK P8P67 Deluxe
driver: e1000e v: kernel port: f040 bus-ID: 00:19.0 chip-ID: 8086:1503
class-ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Device-2: Broadcom BCM4360 802.11ac Wireless Network Adapter driver: wl
v: kernel modules: bcma bus-ID: 04:00.0 chip-ID: 14e4:43a0 class-ID: 0280
IF: wlp4s0 state: down mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: ASUSTek Bluetooth Adapter type: USB driver: btusb v: 0.8
bus-ID: 2-1.7:6 chip-ID: 0b05:179c class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Hardware-1: Silicon Image SiI 3114 [SATALink/SATARaid] Serial ATA Controller
driver: sata_sil v: 2.4 port: c080 bus-ID: 08:01.0 chip-ID: 1095:3114
rev: N/A class-ID: 0104
Drives:
Local Storage: total: 26.9 TiB used: 16.61 TiB (61.7%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD40PURX-64GVNY0 size: 3.64 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
rev: 0A80 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD4003FZEX-00Z4SA0 size: 3.64 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: 1A01 scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: Seagate model: ST8000AS0002-1NA17Z
size: 7.28 TiB block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s
type: HDD rpm: 5980 serial: <filter> rev: AR17 scheme: GPT
ID-4: /dev/sdd maj-min: 8:48 vendor: HGST (Hitachi) model: HUH728080ALE604
size: 7.28 TiB block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: W55H scheme: GPT
ID-5: /dev/sde maj-min: 8:64 vendor: Western Digital
model: WD1002FAEX-00Y9A0 size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1D05
scheme: GPT
ID-6: /dev/sdf maj-min: 8:80 vendor: Western Digital
model: WD2002FAEX-007BA0 size: 1.82 TiB block-size: physical: 512 B
logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1D05
scheme: GPT
ID-7: /dev/sdg maj-min: 8:96 vendor: Samsung model: SSD 850 EVO 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: 3B6Q scheme: GPT
ID-8: /dev/sdh maj-min: 8:112 vendor: Samsung model: SSD 860 EVO 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: 4B6Q scheme: GPT
ID-9: /dev/sdi maj-min: 8:128 vendor: Seagate model: ST9320325AS
size: 298.09 GiB block-size: physical: 512 B logical: 512 B speed: 1.5 Gb/s
type: HDD rpm: 5400 serial: <filter> rev: SDM1 scheme: GPT
ID-10: /dev/sdj maj-min: 8:144 vendor: Samsung model: SSD 840 PRO Series
size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 1.5 Gb/s
type: SSD serial: <filter> rev: 6B0Q scheme: GPT
Optical-1: /dev/sr0 vendor: TSSTcorp model: CDDVDW SH-S243D rev: SB00
dev-links: cdrom
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
ID-1: / raw-size: 931.01 GiB size: 916.15 GiB (98.40%)
used: 155.96 GiB (17.0%) fs: ext4 dev: /dev/sdh2 maj-min: 8:114 label: N/A
uuid: 474207ab-201d-40dc-9f87-3c658fb59e30
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)
used: 168 KiB (0.0%) fs: vfat dev: /dev/sdh1 maj-min: 8:113 label: N/A
uuid: CD22-B3D7
ID-3: /mnt/C_Drive raw-size: 930.14 GiB size: 930.14 GiB (100.00%)
used: 724.96 GiB (77.9%) fs: ntfs dev: /dev/sdg4 maj-min: 8:100 label: N/A
uuid: F4B614C9B6148E6C
ID-4: /mnt/Data raw-size: 931.73 GiB size: 931.73 GiB (100.00%)
used: 668.36 GiB (71.7%) fs: ntfs dev: /dev/sdf2 maj-min: 8:82 label: Data
uuid: F210E68E10E658DD
ID-5: /mnt/MT.Shows raw-size: 7.28 TiB size: 7.28 TiB (100.00%)
used: 6.13 TiB (84.2%) fs: ntfs dev: /dev/sdd2 maj-min: 8:50
label: Movies & TV Shows uuid: 525A41965A4177AD
ID-6: /mnt/MT.Shows.Ext raw-size: 3.64 TiB size: 3.64 TiB (100.00%)
used: 897.59 GiB (24.1%) fs: ntfs dev: /dev/sdb2 maj-min: 8:18 label: MT Ext
uuid: A40CCA780CCA44D0
ID-7: /mnt/MT.Shows_shadow raw-size: 7.28 TiB size: 7.28 TiB (100.00%)
used: 6.19 TiB (85.0%) fs: ntfs dev: /dev/sdc2 maj-min: 8:34
label: Shadow M&T uuid: F812DD0212DCC732
ID-8: /mnt/backup raw-size: 931.51 GiB size: 931.51 GiB (100.00%)
used: 563.36 GiB (60.5%) fs: ntfs dev: /dev/sde1 maj-min: 8:65 label: Backup
uuid: 280ED2470ED20DA6
ID-9: /mnt/backup_shadow raw-size: 931.16 GiB size: 931.16 GiB (100.00%)
used: 472.99 GiB (50.8%) fs: ntfs dev: /dev/sdf3 maj-min: 8:83
label: Backup.Shadow uuid: 669C18519C181DDD
ID-10: /mnt/gdrive_backup raw-size: 3.64 TiB size: 3.64 TiB (100.00%)
used: 916.49 GiB (24.6%) fs: ntfs dev: /dev/sda2 maj-min: 8:2
label: Google Drive Backup uuid: 46A44B7DA44B6E8D
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 128 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-2: /dev/sdb1 maj-min: 8:17 size: 128 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-3: /dev/sdc1 maj-min: 8:33 size: 128 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-4: /dev/sdd1 maj-min: 8:49 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-5: /dev/sdf1 maj-min: 8:81 size: 128 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-6: /dev/sdg1 maj-min: 8:97 size: 300 MiB fs: ntfs label: Recovery
uuid: 72080F41080F0437
ID-7: /dev/sdg2 maj-min: 8:98 size: 100 MiB fs: vfat label: N/A
uuid: 4A11-B4CD
ID-8: /dev/sdg3 maj-min: 8:99 size: 128 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-9: /dev/sdg5 maj-min: 8:101 size: 874 MiB fs: ntfs label: N/A
uuid: 4A96702096700EA7
ID-10: /dev/sdi1 maj-min: 8:129 size: 300 MiB fs: vfat label: N/A
uuid: 0171-7A63
ID-11: /dev/sdi2 maj-min: 8:130 size: 297.79 GiB fs: ext4 label: N/A
uuid: 4724a632-bddb-4510-930d-5943ea23e1e4
ID-12: /dev/sdj1 maj-min: 8:145 size: 238.47 GiB fs: ext4 label: N/A
uuid: 08cacb5e-45d7-4a68-9d8f-ce66634ae1c8
USB:
Hub-1: 1-0:1 info: Full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:0024 class-ID: 0900
Hub-3: 2-0:1 info: Full speed or root hub ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0
speed: 480 Mb/s chip-ID: 8087:0024 class-ID: 0900
Hub-5: 2-1.3:3 info: Genesys Logic Hub ports: 3 rev: 2.0 speed: 480 Mb/s
power: 100mA chip-ID: 05e3:0608 class-ID: 0900
Device-1: 2-1.3.1:5 info: SteelSeries ApS SteelSeries Apex Gaming Keyboard
type: HID,Keyboard driver: hid-generic,usbhid interfaces: 3 rev: 1.1
speed: 12 Mb/s power: 2mA chip-ID: 1038:1202 class-ID: 0300
Device-2: 2-1.4:4 info: Logitech Webcam C310 type: Video,Audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
power: 500mA chip-ID: 046d:081b class-ID: 0102 serial: <filter>
Device-3: 2-1.7:6 info: ASUSTek Bluetooth Adapter type: Bluetooth
driver: btusb interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 100mA
chip-ID: 0b05:179c class-ID: e001
Hub-6: 5-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-7: 6-0:1 info: Super-speed hub ports: 2 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-8: 7-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 7-1:2 info: Corsair M65 Gaming Mouse type: Mouse,Keyboard
driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 1b1c:1b05 class-ID: 0300
Hub-9: 8-0:1 info: Super-speed hub ports: 2 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 29.8 C mobo: 27.8 C
Fan Speeds (RPM): N/A
Info:
Processes: 192 Uptime: 21m wakeups: 0 Init: systemd v: 250 tool: systemctl
Compilers: gcc: 11.1.0 alt: 8 clang: 13.0.0 Packages: pacman: 1682 lib: 446
flatpak: 0 Shell: Zsh v: 5.8 running-in: sshd (SSH) inxi: 3.3.12
xorg log
[ 1570.835]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[ 1570.835] Current Operating System: Linux 64ssd 5.16.5-1-MANJARO #1 SMP PREEMPT Tue Feb 1 16:57:14 UTC 2022 x86_64
[ 1570.835] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.16-x86_64 root=UUID=474207ab-201d-40dc-9f87-3c658fb59e30 rw quiet apparmor=1 security=apparmor udev.log_priority=3 intel_iommu=on iommu=pt
[ 1570.835]
[ 1570.835] Current version of pixman: 0.40.0
[ 1570.835] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1570.835] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1570.835] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 7 19:21:41 2022
[ 1570.835] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1570.835] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1570.835] (==) ServerLayout "layout"
[ 1570.835] (**) |-->Screen "iGPU" (0)
[ 1570.835] (**) | |-->Monitor "<default monitor>"
[ 1570.836] (**) | |-->Device "iGPU"
[ 1570.836] (**) | |-->GPUDevice "dGPU"
[ 1570.836] (==) No monitor specified for screen "iGPU".
Using a default monitor configuration.
[ 1570.836] (==) Automatically adding devices
[ 1570.836] (==) Automatically enabling devices
[ 1570.836] (==) Automatically adding GPU devices
[ 1570.836] (==) Automatically binding GPU devices
[ 1570.836] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1570.836] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 1570.836] Entry deleted from font path.
[ 1570.836] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 1570.836] Entry deleted from font path.
[ 1570.836] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[ 1570.836] Entry deleted from font path.
[ 1570.836] (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[ 1570.836] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[ 1570.836] Entry deleted from font path.
[ 1570.836] (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[ 1570.836] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF
[ 1570.836] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1570.836] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1570.836] (II) Module ABI versions:
[ 1570.836] X.Org ANSI C Emulation: 0.4
[ 1570.836] X.Org Video Driver: 25.2
[ 1570.836] X.Org XInput driver : 24.4
[ 1570.836] X.Org Server Extension : 10.0
[ 1570.837] (++) using VT number 7
[ 1570.838] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_37600
[ 1570.838] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1570.838] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 1570.839] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[ 1570.840] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 1570.840] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 1570.840] (**) OutputClass "dGPU" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 1570.840] (**) OutputClass "dGPU" setting /dev/dri/card0 as PrimaryGPU
[ 1570.842] (--) PCI:*(1@0:0:0) 10de:2182:1043:86a3 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 1570.842] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1570.842] (II) LoadModule: "glx"
[ 1570.842] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1570.843] (II) Module glx: vendor="X.Org Foundation"
[ 1570.843] compiled for 1.21.1.3, module version = 1.0.0
[ 1570.843] ABI class: X.Org Server Extension, version 10.0
[ 1570.843] (II) LoadModule: "modesetting"
[ 1570.843] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1570.846] (II) Module modesetting: vendor="X.Org Foundation"
[ 1570.846] compiled for 1.21.1.3, module version = 1.21.1
[ 1570.846] Module class: X.Org Video Driver
[ 1570.846] ABI class: X.Org Video Driver, version 25.2
[ 1570.846] (II) LoadModule: "nvidia"
[ 1570.847] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1570.847] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1570.847] compiled for 1.6.99.901, module version = 1.0.0
[ 1570.847] Module class: X.Org Video Driver
[ 1570.847] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1570.847] (II) NVIDIA dlloader X Driver 510.47.03 Mon Jan 24 23:02:31 UTC 2022
[ 1570.847] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1570.847] (WW) Falling back to old probe method for modesetting
[ 1570.847] (II) systemd-logind: releasing fd for 226:0
[ 1570.848] (II) Loading sub module "fb"
[ 1570.848] (II) LoadModule: "fb"
[ 1570.848] (II) Module "fb" already built-in
[ 1570.848] (II) Loading sub module "wfb"
[ 1570.848] (II) LoadModule: "wfb"
[ 1570.848] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1570.848] (II) Module wfb: vendor="X.Org Foundation"
[ 1570.848] compiled for 1.21.1.3, module version = 1.0.0
[ 1570.848] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1570.848] (II) Loading sub module "ramdac"
[ 1570.848] (II) LoadModule: "ramdac"
[ 1570.848] (II) Module "ramdac" already built-in
[ 1570.849] (WW) Falling back to old probe method for modesetting
[ 1570.849] (EE) No devices detected.
[ 1570.849] (EE)
Fatal server error:
[ 1570.849] (EE) no screens found(EE)
[ 1570.849] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1570.849] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1570.849] (EE)
[ 1570.851] (EE) Server terminated with error (1). Closing log file.
nvidia-smi
Mon Feb 7 19:27:04 2022
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 510.47.03 Driver Version: 510.47.03 CUDA Version: 11.6 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|===============================+======================+======================|
| 0 NVIDIA GeForce ... Off | 00000000:01:00.0 Off | N/A |
| 28% 38C P0 1W / 120W | 0MiB / 6144MiB | 0% Default |
| | | N/A |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=============================================================================|
| No running processes found |
+-----------------------------------------------------------------------------+
dmesg output
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xdf385000 ACPI 2.0=0xdf385000 SMBIOS=0xdec28e98 MPS=0xfc9e0
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8Z68-V PRO GEN3, BIOS 3802 01/15/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3310.693 MHz processor
[ 0.002092] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002093] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002099] last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[ 0.002102] MTRR default type: uncachable
[ 0.002103] MTRR fixed ranges enabled:
[ 0.002104] 00000-9FFFF write-back
[ 0.002104] A0000-BFFFF uncachable
[ 0.002105] C0000-DBFFF write-protect
[ 0.002106] DC000-DFFFF uncachable
[ 0.002106] E0000-E7FFF write-through
[ 0.002107] E8000-FFFFF write-protect
[ 0.002108] MTRR variable ranges enabled:
[ 0.002109] 0 base 000000000 mask C00000000 write-back
[ 0.002110] 1 base 400000000 mask FF0000000 write-back
[ 0.002110] 2 base 410000000 mask FF8000000 write-back
[ 0.002111] 3 base 418000000 mask FFC000000 write-back
[ 0.002112] 4 base 41C000000 mask FFE000000 write-back
[ 0.002113] 5 base 41E000000 mask FFF000000 write-back
[ 0.002113] 6 base 0E0000000 mask FE0000000 uncachable
[ 0.002114] 7 disabled
[ 0.002114] 8 disabled
[ 0.002115] 9 disabled
[ 0.002708] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002836] total RAM covered: 16368M
[ 0.003221] Found optimal setting for mtrr clean up
[ 0.003222] gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
[ 0.003802] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.003806] last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.012422] found SMP MP-table at [mem 0x000fce30-0x000fce3f]
[ 0.012454] check: Scanning 1 areas for low memory corruption
[ 0.012988] Secure boot disabled
[ 0.012989] RAMDISK: [mem 0x365a1000-0x372c7fff]
[ 0.012993] ACPI: Early table checksum verification disabled
[ 0.012996] ACPI: RSDP 0x00000000DF385000 000024 (v02 ALASKA)
[ 0.012998] ACPI: XSDT 0x00000000DF385078 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.013003] ACPI: FACP 0x00000000DF390C70 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.013008] ACPI: DSDT 0x00000000DF385170 00BAFE (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.013010] ACPI: FACS 0x00000000DF3BEF80 000040
[ 0.013012] ACPI: APIC 0x00000000DF390D68 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.013014] ACPI: MCFG 0x00000000DF390DE0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.013017] ACPI: HPET 0x00000000DF390E20 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.013019] ACPI: SSDT 0x00000000DF390E58 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.013021] ACPI: SSDT 0x00000000DF3911C8 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.013024] ACPI: SSDT 0x00000000DF391B78 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.013026] ACPI: BGRT 0x00000000DF392668 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.013028] ACPI: Reserving FACP table memory at [mem 0xdf390c70-0xdf390d63]
[ 0.013029] ACPI: Reserving DSDT table memory at [mem 0xdf385170-0xdf390c6d]
[ 0.013030] ACPI: Reserving FACS table memory at [mem 0xdf3bef80-0xdf3befbf]
[ 0.013031] ACPI: Reserving APIC table memory at [mem 0xdf390d68-0xdf390dd9]
[ 0.013031] ACPI: Reserving MCFG table memory at [mem 0xdf390de0-0xdf390e1b]
[ 0.013032] ACPI: Reserving HPET table memory at [mem 0xdf390e20-0xdf390e57]
[ 0.013033] ACPI: Reserving SSDT table memory at [mem 0xdf390e58-0xdf3911c4]
[ 0.013034] ACPI: Reserving SSDT table memory at [mem 0xdf3911c8-0xdf391b71]
[ 0.013034] ACPI: Reserving SSDT table memory at [mem 0xdf391b78-0xdf392609]
[ 0.013035] ACPI: Reserving BGRT table memory at [mem 0xdf392668-0xdf39269f]
[ 0.013043] ACPI: Local APIC address 0xfee00000
[ 0.013080] No NUMA configuration found
[ 0.013081] Faking a node at [mem 0x0000000000000000-0x000000041effffff]
[ 0.013084] NODE_DATA(0) allocated [mem 0x41eff1000-0x41eff4fff]
[ 0.013114] Zone ranges:
[ 0.013115] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.013116] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.013117] Normal [mem 0x0000000100000000-0x000000041effffff]
[ 0.013117] Device empty
[ 0.013118] Movable zone start for each node
[ 0.013119] Early memory node ranges
[ 0.013119] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.013120] node 0: [mem 0x0000000000100000-0x00000000deb8ffff]
[ 0.013121] node 0: [mem 0x00000000df408000-0x00000000df7fffff]
[ 0.013122] node 0: [mem 0x0000000100000000-0x000000041effffff]
[ 0.013189] Zeroed struct page in unavailable ranges: 8410 pages
[ 0.013190] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
[ 0.013191] On node 0 totalpages: 4185894
[ 0.013192] DMA zone: 64 pages used for memmap
[ 0.013193] DMA zone: 48 pages reserved
[ 0.013193] DMA zone: 3998 pages, LIFO batch:0
[ 0.013242] DMA32 zone: 14207 pages used for memmap
[ 0.013243] DMA32 zone: 909192 pages, LIFO batch:63
[ 0.024496] Normal zone: 51136 pages used for memmap
[ 0.024498] Normal zone: 3272704 pages, LIFO batch:63
[ 0.062018] ACPI: PM-Timer IO Port: 0x408
[ 0.062021] ACPI: Local APIC address 0xfee00000
[ 0.062027] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.062038] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.062040] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.062041] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.062042] ACPI: IRQ0 used by override.
[ 0.062043] ACPI: IRQ9 used by override.
[ 0.062045] Using ACPI (MADT) for SMP configuration information
[ 0.062046] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.062051] efi_bgrt: Ignoring BGRT: invalid image address
[ 0.062052] TSC deadline timer available
[ 0.062053] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.062074] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.062075] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.062076] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.062077] PM: Registered nosave memory: [mem 0xdeb90000-0xdebd4fff]
[ 0.062078] PM: Registered nosave memory: [mem 0xdebd5000-0xdec04fff]
[ 0.062078] PM: Registered nosave memory: [mem 0xdec05000-0xdec15fff]
[ 0.062079] PM: Registered nosave memory: [mem 0xdec16000-0xdedecfff]
[ 0.062079] PM: Registered nosave memory: [mem 0xdeded000-0xdee70fff]
[ 0.062080] PM: Registered nosave memory: [mem 0xdee71000-0xdf13ffff]
[ 0.062080] PM: Registered nosave memory: [mem 0xdf140000-0xdf384fff]
[ 0.062081] PM: Registered nosave memory: [mem 0xdf385000-0xdf392fff]
[ 0.062081] PM: Registered nosave memory: [mem 0xdf393000-0xdf3bffff]
[ 0.062082] PM: Registered nosave memory: [mem 0xdf3c0000-0xdf3c4fff]
[ 0.062082] PM: Registered nosave memory: [mem 0xdf3c5000-0xdf407fff]
[ 0.062084] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.062084] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.062085] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.062085] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.062086] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.062086] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.062087] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.062088] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.062088] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.062089] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.062089] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.062090] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.062091] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.062092] Booting paravirtualized kernel on bare hardware
[ 0.062095] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.165003] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.165179] percpu: Embedded 59 pages/cpu s204800 r8192 d28672 u524288
[ 0.165185] pcpu-alloc: s204800 r8192 d28672 u524288 alloc=1*2097152
[ 0.165186] pcpu-alloc: [0] 0 1 2 3
[ 0.165207] Built 1 zonelists, mobility grouping on. Total pages: 4120439
[ 0.165207] Policy zone: Normal
[ 0.165209] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4-x86_64 root=UUID=474207ab-201d-40dc-9f87-3c658fb59e30 rw quiet apparmor=1 security=apparmor udev.log_priority=3 intel_iommu=on iommu=pt
[ 0.165278] DMAR: IOMMU enabled
[ 0.166116] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.166530] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.166582] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.169868] Calgary: detecting Calgary via BIOS EBDA area
[ 0.169870] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.209409] Memory: 16151656K/16743576K available (12291K kernel code, 1331K rwdata, 8140K rodata, 1668K init, 3340K bss, 591920K reserved, 0K cma-reserved)
[ 0.209416] random: get_random_u64 called from __kmem_cache_create+0x3e/0x5c0 with crng_init=0
[ 0.209521] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.209531] Kernel/User page tables isolation: enabled
[ 0.209546] ftrace: allocating 37673 entries in 148 pages
[ 0.220821] rcu: Preemptible hierarchical RCU implementation.
[ 0.220822] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.220823] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.220824] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.220824] Tasks RCU enabled.
[ 0.220825] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.220826] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.223016] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[ 0.223241] Console: colour dummy device 80x25
[ 0.223245] printk: console [tty0] enabled
[ 0.223258] ACPI: Core revision 20190816
[ 0.223338] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.223351] APIC: Switch to symmetric I/O mode setup
[ 0.223750] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.240018] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fb8c1bbb71, max_idle_ns: 440795244389 ns
[ 0.240022] Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.27 BogoMIPS (lpj=11035643)
[ 0.240023] pid_max: default: 32768 minimum: 301
[ 0.250829] LSM: Security Framework initializing
[ 0.250832] Yama: becoming mindful.
[ 0.250854] AppArmor: AppArmor initialized
[ 0.250887] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.250911] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.250920] *** VALIDATE tmpfs ***
[ 0.251037] *** VALIDATE proc ***
[ 0.251079] *** VALIDATE cgroup1 ***
[ 0.251080] *** VALIDATE cgroup2 ***
[ 0.251122] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.251130] process: using mwait in idle threads
[ 0.251132] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.251133] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.251136] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.251138] Spectre V2 : Mitigation: Full generic retpoline
[ 0.251138] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.251139] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.251140] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.251141] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.251143] MDS: Mitigation: Clear CPU buffers
[ 0.251317] Freeing SMP alternatives memory: 32K
[ 0.253428] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.253520] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.253527] ... version: 3
[ 0.253527] ... bit width: 48
[ 0.253528] ... generic registers: 8
[ 0.253529] ... value mask: 0000ffffffffffff
[ 0.253529] ... max period: 00007fffffffffff
[ 0.253529] ... fixed-purpose events: 3
[ 0.253530] ... event mask: 00000007000000ff
[ 0.253564] rcu: Hierarchical SRCU implementation.
[ 0.254075] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.254124] smp: Bringing up secondary CPUs ...
[ 0.254226] x86: Booting SMP configuration:
[ 0.254227] .... node #0, CPUs: #1 #2 #3
[ 0.262592] smp: Brought up 1 node, 4 CPUs
[ 0.262592] smpboot: Max logical packages: 1
[ 0.262592] smpboot: Total of 4 processors activated (26496.10 BogoMIPS)
[ 0.263821] devtmpfs: initialized
[ 0.263821] x86/mm: Memory block size: 128MB
[ 0.264720] PM: Registering ACPI NVS region [mem 0xdeded000-0xdee70fff] (540672 bytes)
[ 0.264720] PM: Registering ACPI NVS region [mem 0xdf140000-0xdf384fff] (2379776 bytes)
[ 0.264720] PM: Registering ACPI NVS region [mem 0xdf393000-0xdf3bffff] (184320 bytes)
[ 0.264720] PM: Registering ACPI NVS region [mem 0xdf3c5000-0xdf407fff] (274432 bytes)
[ 0.264720] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.264720] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.264720] pinctrl core: initialized pinctrl subsystem
[ 0.264720] PM: RTC time: 03:36:03, date: 2022-02-08
[ 0.264720] NET: Registered protocol family 16
[ 0.264720] audit: initializing netlink subsys (disabled)
[ 0.264720] audit: type=2000 audit(1644291363.039:1): state=initialized audit_enabled=0 res=1
[ 0.264720] cpuidle: using governor ladder
[ 0.264720] cpuidle: using governor menu
[ 0.264720] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.264720] ACPI: bus type PCI registered
[ 0.264720] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.264720] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.264720] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.264720] PCI: Using configuration type 1 for base access
[ 0.264720] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.264720] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.267515] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.267515] ACPI: Added _OSI(Module Device)
[ 0.267515] ACPI: Added _OSI(Processor Device)
[ 0.267515] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.267515] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.267515] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.267515] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.267515] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.275900] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.277574] ACPI: Dynamic OEM Table Load:
[ 0.277579] ACPI: SSDT 0xFFFF98CA0CEAC000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.278451] ACPI: Dynamic OEM Table Load:
[ 0.278454] ACPI: SSDT 0xFFFF98CA0CC0FC00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.279137] ACPI: Dynamic OEM Table Load:
[ 0.279140] ACPI: SSDT 0xFFFF98CA0C7C8200 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.280421] ACPI: EC: EC started
[ 0.280422] ACPI: EC: interrupt blocked
[ 0.280429] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.280431] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.280432] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.280432] ACPI: Interpreter enabled
[ 0.280452] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.280453] ACPI: Using IOAPIC for interrupt routing
[ 0.280478] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.280723] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.288584] ACPI: Power Resource [FN00] (off)
[ 0.288666] ACPI: Power Resource [FN01] (off)
[ 0.288748] ACPI: Power Resource [FN02] (off)
[ 0.288827] ACPI: Power Resource [FN03] (off)
[ 0.288907] ACPI: Power Resource [FN04] (off)
[ 0.289651] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.289655] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.289749] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.290383] PCI host bridge to bus 0000:00
[ 0.290385] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.290386] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.290387] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.290387] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.290388] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.290389] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.290397] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.290493] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.290526] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.290651] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.290675] pci 0000:00:16.0: reg 0x10: [mem 0xf712c000-0xf712c00f 64bit]
[ 0.290746] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.290841] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.290860] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
[ 0.290867] pci 0000:00:19.0: reg 0x14: [mem 0xf7129000-0xf7129fff]
[ 0.290875] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.290932] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.291032] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.291053] pci 0000:00:1a.0: reg 0x10: [mem 0xf7128000-0xf71283ff]
[ 0.291134] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.291234] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.291253] pci 0000:00:1b.0: reg 0x10: [mem 0xf7120000-0xf7123fff 64bit]
[ 0.291318] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.291415] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.291507] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.291613] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.291704] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.291816] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.291907] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.292020] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.292111] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.292222] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.292313] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.292426] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[ 0.292518] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.292634] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.292725] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.292836] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.292857] pci 0000:00:1d.0: reg 0x10: [mem 0xf7127000-0xf71273ff]
[ 0.292939] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.293039] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
[ 0.293231] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.293248] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.293255] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.293262] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.293268] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.293275] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.293282] pci 0000:00:1f.2: reg 0x24: [mem 0xf7126000-0xf71267ff]
[ 0.293321] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.293419] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.293437] pci 0000:00:1f.3: reg 0x10: [mem 0xf7125000-0xf71250ff 64bit]
[ 0.293456] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.293591] pci 0000:01:00.0: [10de:2182] type 00 class 0x030000
[ 0.293609] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.293618] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.293627] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.293633] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.293639] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.293643] pci 0000:01:00.0: enabling Extended Tags
[ 0.293655] pci 0000:01:00.0: BAR 3: assigned to efifb
[ 0.293689] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.293718] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.293751] pci 0000:01:00.1: [10de:1aeb] type 00 class 0x040300
[ 0.293763] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.293789] pci 0000:01:00.1: enabling Extended Tags
[ 0.293861] pci 0000:01:00.2: [10de:1aec] type 00 class 0x0c0330
[ 0.293876] pci 0000:01:00.2: reg 0x10: [mem 0xf2000000-0xf203ffff 64bit pref]
[ 0.293887] pci 0000:01:00.2: reg 0x1c: [mem 0xf2040000-0xf204ffff 64bit pref]
[ 0.293899] pci 0000:01:00.2: enabling Extended Tags
[ 0.293932] pci 0000:01:00.2: PME# supported from D0 D3hot
[ 0.293979] pci 0000:01:00.3: [10de:1aed] type 00 class 0x0c8000
[ 0.293991] pci 0000:01:00.3: reg 0x10: [mem 0xf7084000-0xf7084fff]
[ 0.294017] pci 0000:01:00.3: enabling Extended Tags
[ 0.294050] pci 0000:01:00.3: PME# supported from D0 D3hot
[ 0.294117] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.294118] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.294120] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.294122] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf20fffff 64bit pref]
[ 0.294168] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.294245] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.294286] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a07fff 64bit]
[ 0.294449] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.294557] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.294562] pci 0000:00:1c.1: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.294634] pci 0000:04:00.0: [14e4:43a0] type 00 class 0x028000
[ 0.294676] pci 0000:04:00.0: reg 0x10: [mem 0xf7400000-0xf7407fff 64bit]
[ 0.294693] pci 0000:04:00.0: reg 0x18: [mem 0xf7200000-0xf73fffff 64bit]
[ 0.294840] pci 0000:04:00.0: supports D1 D2
[ 0.294841] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.294980] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.294985] pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf74fffff]
[ 0.295072] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
[ 0.295120] pci 0000:05:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.295135] pci 0000:05:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.295150] pci 0000:05:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.295166] pci 0000:05:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.295180] pci 0000:05:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.295196] pci 0000:05:00.0: reg 0x24: [mem 0xf7910000-0xf79101ff]
[ 0.295211] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.295284] pci 0000:05:00.0: PME# supported from D3hot
[ 0.295391] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.295394] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.295397] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.295470] pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.295511] pci 0000:06:00.0: reg 0x10: [mem 0xf7800000-0xf7807fff 64bit]
[ 0.295675] pci 0000:06:00.0: PME# supported from D3hot D3cold
[ 0.295782] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.295787] pci 0000:00:1c.4: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.295852] pci 0000:07:00.0: [1b21:1080] type 01 class 0x060401
[ 0.296023] pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractive decode)
[ 0.296027] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.296030] pci 0000:00:1c.6: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.296035] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.296036] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.296037] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.296038] pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.296039] pci 0000:00:1c.6: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.296071] pci_bus 0000:08: extended config space not accessible
[ 0.296098] pci 0000:08:01.0: [1095:3114] type 00 class 0x010400
[ 0.296128] pci 0000:08:01.0: reg 0x10: [io 0xc0c0-0xc0c7]
[ 0.296145] pci 0000:08:01.0: reg 0x14: [io 0xc0b0-0xc0b3]
[ 0.296161] pci 0000:08:01.0: reg 0x18: [io 0xc0a0-0xc0a7]
[ 0.296178] pci 0000:08:01.0: reg 0x1c: [io 0xc090-0xc093]
[ 0.296194] pci 0000:08:01.0: reg 0x20: [io 0xc080-0xc08f]
[ 0.296211] pci 0000:08:01.0: reg 0x24: [mem 0xf7781000-0xf77813ff]
[ 0.296227] pci 0000:08:01.0: reg 0x30: [mem 0xf7700000-0xf777ffff pref]
[ 0.296280] pci 0000:08:01.0: supports D1 D2
[ 0.296329] pci 0000:08:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.296360] pci 0000:08:02.0: reg 0x10: [mem 0xf7780000-0xf77807ff]
[ 0.296377] pci 0000:08:02.0: reg 0x14: [io 0xc000-0xc07f]
[ 0.296509] pci 0000:08:02.0: supports D2
[ 0.296510] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 0.296618] pci 0000:07:00.0: PCI bridge to [bus 08] (subtractive decode)
[ 0.296627] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
[ 0.296632] pci 0000:07:00.0: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.296641] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
[ 0.296642] pci 0000:07:00.0: bridge window [mem 0xf7700000-0xf77fffff] (subtractive decode)
[ 0.296643] pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.296644] pci 0000:07:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.296644] pci 0000:07:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.296645] pci 0000:07:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.296646] pci 0000:07:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.296722] pci 0000:09:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.296749] pci 0000:09:00.0: reg 0x10: [io 0xb040-0xb047]
[ 0.296761] pci 0000:09:00.0: reg 0x14: [io 0xb030-0xb033]
[ 0.296773] pci 0000:09:00.0: reg 0x18: [io 0xb020-0xb027]
[ 0.296785] pci 0000:09:00.0: reg 0x1c: [io 0xb010-0xb013]
[ 0.296797] pci 0000:09:00.0: reg 0x20: [io 0xb000-0xb00f]
[ 0.296809] pci 0000:09:00.0: reg 0x24: [mem 0xf7610000-0xf76101ff]
[ 0.296821] pci 0000:09:00.0: reg 0x30: [mem 0xf7600000-0xf760ffff pref]
[ 0.296838] pci 0000:09:00.0: Enabling fixed DMA alias to 00.1
[ 0.296891] pci 0000:09:00.0: PME# supported from D3hot
[ 0.296990] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 0.296993] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 0.296997] pci 0000:00:1c.7: bridge window [mem 0xf7600000-0xf76fffff]
[ 0.297570] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.297635] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.297698] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.297761] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.297825] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.297887] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.297950] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.298012] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.298300] ACPI: EC: interrupt unblocked
[ 0.298307] ACPI: EC: event unblocked
[ 0.298313] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.298314] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.298371] iommu: Default domain type: Passthrough (set via kernel command line)
[ 0.298385] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.298385] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.298385] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.298385] vgaarb: loaded
[ 0.298385] ACPI: bus type USB registered
[ 0.298385] usbcore: registered new interface driver usbfs
[ 0.298385] usbcore: registered new interface driver hub
[ 0.298385] usbcore: registered new device driver usb
[ 0.298385] pps_core: LinuxPPS API ver. 1 registered
[ 0.298385] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.298385] PTP clock support registered
[ 0.298385] EDAC MC: Ver: 3.0.0
[ 0.298385] Registered efivars operations
[ 0.298385] PCI: Using ACPI for IRQ routing
[ 0.298385] PCI: pci_cache_line_size set to 64 bytes
[ 0.298385] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.298385] e820: reserve RAM buffer [mem 0xdeb90000-0xdfffffff]
[ 0.298385] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.298385] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[ 0.298385] NetLabel: Initializing
[ 0.298385] NetLabel: domain hash size = 128
[ 0.298385] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.298385] NetLabel: unlabeled traffic allowed by default
[ 0.300887] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.300892] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.302951] clocksource: Switched to clocksource tsc-early
[ 0.309846] *** VALIDATE bpf ***
[ 0.309902] VFS: Disk quotas dquot_6.6.0
[ 0.309916] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.309939] *** VALIDATE ramfs ***
[ 0.309941] *** VALIDATE hugetlbfs ***
[ 0.310010] AppArmor: AppArmor Filesystem Enabled
[ 0.310055] pnp: PnP ACPI init
[ 0.310176] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.310181] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.310273] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.310275] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.310276] system 00:01: [io 0xffff] has been reserved
[ 0.310277] system 00:01: [io 0xffff] has been reserved
[ 0.310278] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.310279] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.310280] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.310281] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.310284] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310304] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.310359] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.310362] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.310464] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.310467] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310522] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.310525] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310817] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.310818] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.310819] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.310820] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.310821] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.310822] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.310823] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.310824] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.310825] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.310827] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.310828] system 00:06: [mem 0xf2100000-0xf2100fff] has been reserved
[ 0.310831] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310979] pnp: PnP ACPI: found 7 devices
[ 0.312028] thermal_sys: Registered thermal governor 'fair_share'
[ 0.312029] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.312034] thermal_sys: Registered thermal governor 'step_wise'
[ 0.312035] thermal_sys: Registered thermal governor 'user_space'
[ 0.312035] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.316565] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.316594] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.316596] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.316597] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.316606] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2200000-0xf23fffff]
[ 0.316609] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2400000-0xf25fffff 64bit pref]
[ 0.316611] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.316613] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.316615] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.316617] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.316619] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf20fffff 64bit pref]
[ 0.316621] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.316623] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.316628] pci 0000:00:1c.0: bridge window [mem 0xf2200000-0xf23fffff]
[ 0.316631] pci 0000:00:1c.0: bridge window [mem 0xf2400000-0xf25fffff 64bit pref]
[ 0.316636] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.316641] pci 0000:00:1c.1: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.316648] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.316652] pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf74fffff]
[ 0.316660] pci 0000:05:00.0: BAR 6: assigned [mem 0xf7900000-0xf790ffff pref]
[ 0.316661] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.316664] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.316668] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.316675] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.316679] pci 0000:00:1c.4: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.316689] pci 0000:07:00.0: PCI bridge to [bus 08]
[ 0.316693] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
[ 0.316700] pci 0000:07:00.0: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.316713] pci 0000:00:1c.6: PCI bridge to [bus 07-08]
[ 0.316716] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.316720] pci 0000:00:1c.6: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.316727] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 0.316729] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 0.316734] pci 0000:00:1c.7: bridge window [mem 0xf7600000-0xf76fffff]
[ 0.316742] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.316742] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.316743] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.316744] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window]
[ 0.316745] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfeafffff window]
[ 0.316746] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.316747] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.316748] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf20fffff 64bit pref]
[ 0.316749] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.316749] pci_bus 0000:02: resource 1 [mem 0xf2200000-0xf23fffff]
[ 0.316750] pci_bus 0000:02: resource 2 [mem 0xf2400000-0xf25fffff 64bit pref]
[ 0.316751] pci_bus 0000:03: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.316752] pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf74fffff]
[ 0.316753] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.316754] pci_bus 0000:05: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.316755] pci_bus 0000:06: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.316756] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
[ 0.316757] pci_bus 0000:07: resource 1 [mem 0xf7700000-0xf77fffff]
[ 0.316758] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
[ 0.316759] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
[ 0.316759] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.316760] pci_bus 0000:07: resource 7 [mem 0x000dc000-0x000dffff window]
[ 0.316761] pci_bus 0000:07: resource 8 [mem 0xe0000000-0xfeafffff window]
[ 0.316762] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.316763] pci_bus 0000:08: resource 1 [mem 0xf7700000-0xf77fffff]
[ 0.316764] pci_bus 0000:08: resource 4 [io 0xc000-0xcfff]
[ 0.316764] pci_bus 0000:08: resource 5 [mem 0xf7700000-0xf77fffff]
[ 0.316765] pci_bus 0000:08: resource 6 [io 0x0000-0x0cf7 window]
[ 0.316766] pci_bus 0000:08: resource 7 [io 0x0d00-0xffff window]
[ 0.316767] pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.316768] pci_bus 0000:08: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.316769] pci_bus 0000:08: resource 10 [mem 0xe0000000-0xfeafffff window]
[ 0.316770] pci_bus 0000:09: resource 0 [io 0xb000-0xbfff]
[ 0.316770] pci_bus 0000:09: resource 1 [mem 0xf7600000-0xf76fffff]
[ 0.316877] NET: Registered protocol family 2
[ 0.317043] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.318906] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.318993] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.319196] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.319271] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.319316] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.319363] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.319420] NET: Registered protocol family 1
[ 0.319424] NET: Registered protocol family 44
[ 0.340168] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6d0 took 20239 usecs
[ 0.360159] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6d0 took 19499 usecs
[ 0.360179] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.360190] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.360228] pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
[ 0.360325] pci 0000:01:00.2: enabling device (0000 -> 0002)
[ 0.360415] pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
[ 0.360761] pci 0000:07:00.0: Disabling ASPM L0s/L1
[ 0.360776] PCI: CLS 64 bytes, default 64
[ 0.360823] Trying to unpack rootfs image as initramfs...
[ 0.466015] Freeing initrd memory: 13468K
[ 0.466024] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.466025] software IO TLB: mapped [mem 0xdab90000-0xdeb90000] (64MB)
[ 0.466160] check: Scanning for low memory corruption every 60 seconds
[ 0.466432] Initialise system trusted keyrings
[ 0.466440] Key type blacklist registered
[ 0.466479] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.467463] zbud: loaded
[ 0.470803] Key type asymmetric registered
[ 0.470804] Asymmetric key parser 'x509' registered
[ 0.470811] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.470840] io scheduler mq-deadline registered
[ 0.470841] io scheduler kyber registered
[ 0.470858] io scheduler bfq registered
[ 0.471730] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.471794] efifb: probing for efifb
[ 0.471805] efifb: No BGRT, not showing boot graphics
[ 0.471806] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
[ 0.471807] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.471807] efifb: scrolling: redraw
[ 0.471809] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.471838] fbcon: Deferring console take-over
[ 0.471838] fb0: EFI VGA frame buffer device
[ 0.471844] intel_idle: MWAIT substates: 0x1120
[ 0.471845] intel_idle: v0.4.1 model 0x2A
[ 0.471948] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.472011] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.473406] ACPI: Power Button [PWRB]
[ 0.473447] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.473602] ACPI: Power Button [PWRF]
[ 0.474367] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.474368] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.474637] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.474638] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.474799] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.475469] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.475470] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.475966] usbcore: registered new interface driver usbserial_generic
[ 0.475970] usbserial: USB Serial support registered for generic
[ 0.475986] rtc_cmos 00:02: RTC can wake from S4
[ 0.476191] rtc_cmos 00:02: registered as rtc0
[ 0.476202] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.476240] intel_pstate: Intel P-state driver initializing
[ 0.476479] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.476548] drop_monitor: Initializing network drop monitor service
[ 0.476800] NET: Registered protocol family 10
[ 0.486557] Segment Routing with IPv6
[ 0.486593] NET: Registered protocol family 17
[ 0.487094] RAS: Correctable Errors collector initialized.
[ 0.487172] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[ 0.487320] microcode: Microcode Update Driver: v2.2.
[ 0.487325] IPI shorthand broadcast: enabled
[ 0.487336] sched_clock: Marking stable (487160519, 153113)->(707524318, -220210686)
[ 0.487553] registered taskstats version 1
[ 0.487569] Loading compiled-in X.509 certificates
[ 0.490465] Loaded X.509 cert 'Build time autogenerated kernel key: e77abac7d4bad0a2a4c761fbcd5393665e611f00'
[ 0.490486] zswap: loaded using pool lzo/zbud
[ 0.490782] Key type ._fscrypt registered
[ 0.490784] Key type .fscrypt registered
[ 0.497514] Key type big_key registered
[ 0.497519] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.498143] PM: Magic number: 10:471:613
[ 0.498203] isa: hash matches
[ 0.498300] rtc_cmos 00:02: setting system clock to 2022-02-08T03:36:04 UTC (1644291364)
[ 0.500886] Freeing unused decrypted memory: 2040K
[ 0.501409] Freeing unused kernel image memory: 1668K
[ 0.523417] Write protecting the kernel read-only data: 22528k
[ 0.524334] Freeing unused kernel image memory: 2012K
[ 0.524538] Freeing unused kernel image memory: 52K
[ 0.540790] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.540791] x86/mm: Checking user space page tables
[ 0.549899] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.549900] Run /init as init process
[ 0.922090] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.922979] ehci-pci: EHCI PCI platform driver
[ 0.923140] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.923145] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.923156] ehci-pci 0000:00:1a.0: debug port 2
[ 0.925671] SCSI subsystem initialized
[ 0.925737] xhci_hcd 0000:01:00.2: enabling device (0000 -> 0002)
[ 0.927052] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.927064] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7128000
[ 0.935156] libata version 3.00 loaded.
[ 0.936143] sata_sil 0000:08:01.0: version 2.4
[ 0.936231] sata_sil 0000:08:01.0: Applying R_ERR on DMA activate FIS errata fix
[ 0.938043] ahci 0000:00:1f.2: version 3.0
[ 0.938272] scsi host0: sata_sil
[ 0.939206] scsi host1: sata_sil
[ 0.940035] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.940085] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.940086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.940087] usb usb1: Product: EHCI Host Controller
[ 0.940088] usb usb1: Manufacturer: Linux 5.4.176-1-MANJARO ehci_hcd
[ 0.940089] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.940147] scsi host2: sata_sil
[ 0.940183] hub 1-0:1.0: USB hub found
[ 0.940189] hub 1-0:1.0: 2 ports detected
[ 0.940324] xhci_hcd 0000:01:00.2: xHCI Host Controller
[ 0.940329] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 2
[ 0.940939] xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[ 0.941048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.941049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.941050] usb usb2: Product: xHCI Host Controller
[ 0.941051] usb usb2: Manufacturer: Linux 5.4.176-1-MANJARO xhci-hcd
[ 0.941052] usb usb2: SerialNumber: 0000:01:00.2
[ 0.941170] hub 2-0:1.0: USB hub found
[ 0.941177] hub 2-0:1.0: 2 ports detected
[ 0.941265] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.941269] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 0.941286] ehci-pci 0000:00:1d.0: debug port 2
[ 0.941287] xhci_hcd 0000:01:00.2: xHCI Host Controller
[ 0.941289] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
[ 0.941291] xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.941311] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.941328] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.941329] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.941330] usb usb4: Product: xHCI Host Controller
[ 0.941331] usb usb4: Manufacturer: Linux 5.4.176-1-MANJARO xhci-hcd
[ 0.941332] usb usb4: SerialNumber: 0000:01:00.2
[ 0.941446] hub 4-0:1.0: USB hub found
[ 0.941455] hub 4-0:1.0: 4 ports detected
[ 0.943369] scsi host3: sata_sil
[ 0.943412] ata1: SATA max UDMA/100 mmio m1024@0xf7781000 tf 0xf7781080 irq 19
[ 0.943415] ata2: SATA max UDMA/100 mmio m1024@0xf7781000 tf 0xf77810c0 irq 19
[ 0.943418] ata3: SATA max UDMA/100 mmio m1024@0xf7781000 tf 0xf7781280 irq 19
[ 0.943421] ata4: SATA max UDMA/100 mmio m1024@0xf7781000 tf 0xf77812c0 irq 19
[ 0.945181] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.945190] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7127000
[ 0.950073] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.950074] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.956747] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.956814] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.956816] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.956816] usb usb3: Product: EHCI Host Controller
[ 0.956817] usb usb3: Manufacturer: Linux 5.4.176-1-MANJARO ehci_hcd
[ 0.956818] usb usb3: SerialNumber: 0000:00:1d.0
[ 0.956995] hub 3-0:1.0: USB hub found
[ 0.957002] hub 3-0:1.0: 2 ports detected
[ 0.957134] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.957140] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
[ 1.000610] scsi host4: ahci
[ 1.000810] scsi host5: ahci
[ 1.001041] scsi host6: ahci
[ 1.003369] scsi host7: ahci
[ 1.003404] firewire_ohci 0000:08:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.003528] scsi host8: ahci
[ 1.006698] scsi host9: ahci
[ 1.006746] ata5: SATA max UDMA/133 abar m2048@0xf7126000 port 0xf7126100 irq 25
[ 1.006748] ata6: SATA max UDMA/133 abar m2048@0xf7126000 port 0xf7126180 irq 25
[ 1.006750] ata7: SATA max UDMA/133 abar m2048@0xf7126000 port 0xf7126200 irq 25
[ 1.006753] ata8: SATA max UDMA/133 abar m2048@0xf7126000 port 0xf7126280 irq 25
[ 1.006756] ata9: SATA max UDMA/133 abar m2048@0xf7126000 port 0xf7126300 irq 25
[ 1.006760] ata10: SATA max UDMA/133 abar m2048@0xf7126000 port 0xf7126380 irq 25
[ 1.007024] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.007026] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.007429] scsi host10: ahci
[ 1.010034] scsi host11: ahci
[ 1.010084] ata11: SATA max UDMA/133 abar m512@0xf7910000 port 0xf7910100 irq 19
[ 1.010087] ata12: SATA max UDMA/133 abar m512@0xf7910000 port 0xf7910180 irq 19
[ 1.010263] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.010265] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.010480] scsi host12: ahci
[ 1.010552] scsi host13: ahci
[ 1.010590] ata13: SATA max UDMA/133 abar m512@0xf7610000 port 0xf7610100 irq 27
[ 1.010593] ata14: SATA max UDMA/133 abar m512@0xf7610000 port 0xf7610180 irq 27
[ 1.018258] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[ 1.018469] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.018470] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.018471] usb usb5: Product: xHCI Host Controller
[ 1.018472] usb usb5: Manufacturer: Linux 5.4.176-1-MANJARO xhci-hcd
[ 1.018472] usb usb5: SerialNumber: 0000:03:00.0
[ 1.018635] hub 5-0:1.0: USB hub found
[ 1.018652] hub 5-0:1.0: 2 ports detected
[ 1.018761] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.018763] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
[ 1.018766] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[ 1.018788] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.018805] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.018806] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.018806] usb usb6: Product: xHCI Host Controller
[ 1.018807] usb usb6: Manufacturer: Linux 5.4.176-1-MANJARO xhci-hcd
[ 1.018808] usb usb6: SerialNumber: 0000:03:00.0
[ 1.018954] hub 6-0:1.0: USB hub found
[ 1.018971] hub 6-0:1.0: 2 ports detected
[ 1.019118] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.019121] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 7
[ 1.080220] xhci_hcd 0000:06:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[ 1.080422] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.080423] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.080424] usb usb7: Product: xHCI Host Controller
[ 1.080424] usb usb7: Manufacturer: Linux 5.4.176-1-MANJARO xhci-hcd
[ 1.080425] usb usb7: SerialNumber: 0000:06:00.0
[ 1.080614] hub 7-0:1.0: USB hub found
[ 1.080623] hub 7-0:1.0: 2 ports detected
[ 1.080732] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.080734] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 8
[ 1.080736] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed
[ 1.080766] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.080783] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.080783] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.080784] usb usb8: Product: xHCI Host Controller
[ 1.080785] usb usb8: Manufacturer: Linux 5.4.176-1-MANJARO xhci-hcd
[ 1.080786] usb usb8: SerialNumber: 0000:06:00.0
[ 1.080982] hub 8-0:1.0: USB hub found
[ 1.081001] hub 8-0:1.0: 2 ports detected
[ 1.190074] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.206744] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.260132] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.263823] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S243D, SB00, max UDMA/100
[ 1.270470] ata1.00: configured for UDMA/100
[ 1.271625] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S243D SB00 PQ: 0 ANSI: 5
[ 1.320822] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.320845] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.320868] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.320891] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.320914] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.320932] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.321223] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.321235] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.321307] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.321314] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.321386] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.321398] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.321517] ata6.00: ATA-9: WDC WD4003FZEX-00Z4SA0, 01.01A01, max UDMA/133
[ 1.321520] ata6.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.321637] ata5.00: ATA-9: WDC WD40PURX-64GVNY0, 80.00A80, max UDMA/133
[ 1.321640] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.322104] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.322116] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.322191] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.322202] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.322279] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.322291] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.322355] ata6.00: configured for UDMA/133
[ 1.322434] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.322442] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.322463] ata5.00: configured for UDMA/133
[ 1.322555] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.322601] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.322603] ata7.00: ATA-9: ST8000AS0002-1NA17Z, AR17, max UDMA/133
[ 1.322606] ata7.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.323019] ata9.00: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
[ 1.323022] ata9.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.323727] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.323739] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.324019] ata7.00: configured for UDMA/133
[ 1.324229] ata8.00: ATA-9: HGST HUH728080ALE604, A4AZW55H, max UDMA/133
[ 1.324232] ata8.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.324630] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.324638] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.324799] ata9.00: configured for UDMA/133
[ 1.325106] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.325118] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.325373] ata10.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
[ 1.325376] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.326604] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.326616] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.329816] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 1.329827] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 1.329850] ata8.00: configured for UDMA/133
[ 1.330398] ata10.00: configured for UDMA/133
[ 1.333796] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.333800] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.334193] hub 1-1:1.0: USB hub found
[ 1.334273] hub 1-1:1.0: 6 ports detected
[ 1.353821] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.353824] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.354216] hub 3-1:1.0: USB hub found
[ 1.354403] hub 3-1:1.0: 8 ports detected
[ 1.396746] usb 7-1: new full-speed USB device number 2 using xhci_hcd
[ 1.476728] tsc: Refined TSC clocksource calibration: 3310.800 MHz
[ 1.476735] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fb9265f317, max_idle_ns: 440795256718 ns
[ 1.476784] clocksource: Switched to clocksource tsc
[ 1.480069] ata13: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.481806] ata13.00: supports DRM functions and may not be fully accessible
[ 1.482594] ata13.00: disabling queued TRIM support
[ 1.482597] ata13.00: ATA-9: Samsung SSD 850 EVO 1TB, EMT03B6Q, max UDMA/133
[ 1.482599] ata13.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.483384] ata14: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.483734] ata14.00: supports DRM functions and may not be fully accessible
[ 1.484228] ata14.00: disabling queued TRIM support
[ 1.484231] ata14.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT04B6Q, max UDMA/133
[ 1.484233] ata14.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.484561] ata13.00: supports DRM functions and may not be fully accessible
[ 1.485349] ata13.00: disabling queued TRIM support
[ 1.485942] ata14.00: supports DRM functions and may not be fully accessible
[ 1.486321] ata14.00: disabling queued TRIM support
[ 1.487097] ata13.00: configured for UDMA/133
[ 1.487819] ata14.00: configured for UDMA/133
[ 1.503591] firewire_core 0000:08:02.0: created device fw0: GUID 001fc6000019967d, S400
[ 1.609550] usb 7-1: New USB device found, idVendor=1b1c, idProduct=1b05, bcdDevice= 2.12
[ 1.609553] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.609555] usb 7-1: Product: Corsair M65 Gaming Mouse
[ 1.609556] usb 7-1: Manufacturer: Corsair
[ 1.610243] ata2: SATA link down (SStatus 0 SControl 310)
[ 1.620771] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.624473] usbcore: registered new interface driver usbhid
[ 1.624474] usbhid: USB HID core driver
[ 1.626295] input: Corsair Corsair M65 Gaming Mouse as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb7/7-1/7-1:1.0/0003:1B1C:1B05.0001/input/input2
[ 1.626344] hid-generic 0003:1B1C:1B05.0001: input,hidraw0: USB HID v1.11 Mouse [Corsair Corsair M65 Gaming Mouse] on usb-0000:06:00.0-1/input0
[ 1.626455] input: Corsair Corsair M65 Gaming Mouse as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb7/7-1/7-1:1.1/0003:1B1C:1B05.0002/input/input3
[ 1.633401] usb 3-1.3: new high-speed USB device number 3 using ehci-pci
[ 1.680210] hid-generic 0003:1B1C:1B05.0002: input,hidraw1: USB HID v1.11 Keyboard [Corsair Corsair M65 Gaming Mouse] on usb-0000:06:00.0-1/input1
[ 1.680801] input: Corsair Corsair M65 Gaming Mouse as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb7/7-1/7-1:1.2/0003:1B1C:1B05.0003/input/input4
[ 1.732045] usb 3-1.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=32.98
[ 1.732048] usb 3-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.732050] usb 3-1.3: Product: USB2.0 Hub
[ 1.732591] hub 3-1.3:1.0: USB hub found
[ 1.732913] hub 3-1.3:1.0: 3 ports detected
[ 1.740210] hid-generic 0003:1B1C:1B05.0003: input,hidraw2: USB HID v1.11 Device [Corsair Corsair M65 Gaming Mouse] on usb-0000:06:00.0-1/input2
[ 1.810059] usb 3-1.4: new high-speed USB device number 4 using ehci-pci
[ 1.923406] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.016738] usb 3-1.3.1: new full-speed USB device number 5 using ehci-pci
[ 2.115431] usb 3-1.3.1: New USB device found, idVendor=1038, idProduct=1202, bcdDevice= 0.38
[ 2.115434] usb 3-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.115436] usb 3-1.3.1: Product: SteelSeries Apex Gaming Keyboard
[ 2.115438] usb 3-1.3.1: Manufacturer: SteelSeries
[ 2.117106] hid-generic 0003:1038:1202.0004: hiddev0,hidraw3: USB HID v1.11 Device [SteelSeries SteelSeries Apex Gaming Keyboard] on usb-0000:00:1d.0-1.3.1/input0
[ 2.118303] input: SteelSeries SteelSeries Apex Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/0003:1038:1202.0005/input/input5
[ 2.126327] usb 3-1.4: New USB device found, idVendor=046d, idProduct=081b, bcdDevice= 0.10
[ 2.126331] usb 3-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 2.126333] usb 3-1.4: SerialNumber: F9D73920
[ 2.173528] hid-generic 0003:1038:1202.0005: input,hidraw4: USB HID v1.11 Keyboard [SteelSeries SteelSeries Apex Gaming Keyboard] on usb-0000:00:1d.0-1.3.1/input1
[ 2.174744] input: SteelSeries SteelSeries Apex Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.2/0003:1038:1202.0006/input/input6
[ 2.200052] usb 3-1.7: new full-speed USB device number 6 using ehci-pci
[ 2.230149] hid-generic 0003:1038:1202.0006: input,hidraw5: USB HID v1.11 Device [SteelSeries SteelSeries Apex Gaming Keyboard] on usb-0000:00:1d.0-1.3.1/input2
[ 2.230613] ata3.00: ATA-8: ST9320325AS, 0003SDM1, max UDMA/133
[ 2.230616] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.235962] ata3.00: configured for UDMA/100
[ 2.236240] scsi 2:0:0:0: Direct-Access ATA ST9320325AS SDM1 PQ: 0 ANSI: 5
[ 2.297823] usb 3-1.7: New USB device found, idVendor=0b05, idProduct=179c, bcdDevice= 0.01
[ 2.297826] usb 3-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.549878] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.552620] ata4.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
[ 2.552623] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.555504] ata4.00: configured for UDMA/100
[ 2.555748] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5
[ 2.556440] scsi 4:0:0:0: Direct-Access ATA WDC WD40PURX-64G 0A80 PQ: 0 ANSI: 5
[ 2.556970] scsi 5:0:0:0: Direct-Access ATA WDC WD4003FZEX-0 1A01 PQ: 0 ANSI: 5
[ 2.557389] scsi 6:0:0:0: Direct-Access ATA ST8000AS0002-1NA AR17 PQ: 0 ANSI: 5
[ 2.557729] scsi 7:0:0:0: Direct-Access ATA HGST HUH728080AL W55H PQ: 0 ANSI: 5
[ 2.558013] scsi 8:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
[ 2.558270] scsi 9:0:0:0: Direct-Access ATA WDC WD2002FAEX-0 1D05 PQ: 0 ANSI: 5
[ 2.558538] scsi 12:0:0:0: Direct-Access ATA Samsung SSD 850 3B6Q PQ: 0 ANSI: 5
[ 2.558780] scsi 13:0:0:0: Direct-Access ATA Samsung SSD 860 4B6Q PQ: 0 ANSI: 5
[ 2.561335] sd 3:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 2.561350] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.561353] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.561355] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.561372] sd 2:0:0:0: [sda] Write Protect is off
[ 2.561375] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.561376] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.561407] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.561462] sd 5:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 2.561465] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[ 2.561481] sd 5:0:0:0: [sdd] Write Protect is off
[ 2.561483] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.561497] sd 4:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 2.561499] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[ 2.561509] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.561513] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.561515] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.561541] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.561830] ata14.00: Enabling discard_zeroes_data
[ 2.561955] sd 9:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 2.561971] sd 9:0:0:0: [sdh] Write Protect is off
[ 2.561973] sd 9:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[ 2.562001] sd 9:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.562027] sd 8:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.562044] sd 7:0:0:0: [sdf] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ 2.562046] sd 7:0:0:0: [sdf] 4096-byte physical blocks
[ 2.562066] sd 8:0:0:0: [sdg] Write Protect is off
[ 2.562069] sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 2.562079] sd 7:0:0:0: [sdf] Write Protect is off
[ 2.562081] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 2.562100] sd 13:0:0:0: [sdj] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.562108] sd 8:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.562112] sd 12:0:0:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.562135] sd 12:0:0:0: [sdi] Write Protect is off
[ 2.562137] sd 12:0:0:0: [sdi] Mode Sense: 00 3a 00 00
[ 2.562146] sd 13:0:0:0: [sdj] Write Protect is off
[ 2.562148] sd 13:0:0:0: [sdj] Mode Sense: 00 3a 00 00
[ 2.562156] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.562195] sd 13:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.562218] sd 12:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.562267] sd 6:0:0:0: [sde] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ 2.562270] sd 6:0:0:0: [sde] 4096-byte physical blocks
[ 2.562284] sd 6:0:0:0: [sde] Write Protect is off
[ 2.562286] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.562311] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.590409] ata14.00: Enabling discard_zeroes_data
[ 2.593452] random: fast init done
[ 2.593810] sdb: sdb1
[ 2.594297] sdi: sdi1 sdi2 sdi3 sdi4 sdi5
[ 2.594570] sdj: sdj1 sdj2
[ 2.595502] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.595505] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.620611] sdd: sdd1 sdd2
[ 2.625947] sdh: sdh1 sdh2 sdh3
[ 2.626097] ata14.00: Enabling discard_zeroes_data
[ 2.626861] sd 12:0:0:0: [sdi] supports TCG Opal
[ 2.626864] sd 12:0:0:0: [sdi] Attached SCSI removable disk
[ 2.627040] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.627127] sd 13:0:0:0: [sdj] supports TCG Opal
[ 2.627129] sd 13:0:0:0: [sdj] Attached SCSI removable disk
[ 2.640572] sdf: sdf1 sdf2
[ 2.642474] sdg: sdg1
[ 2.646439] sde: sde1 sde2
[ 2.657023] sd 8:0:0:0: [sdg] Attached SCSI disk
[ 2.657073] sd 9:0:0:0: [sdh] Attached SCSI disk
[ 2.657079] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 2.657118] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.657135] sd 7:0:0:0: [sdf] Attached SCSI disk
[ 2.660238] sd 6:0:0:0: [sde] Attached SCSI disk
[ 2.673972] sdc: sdc1 sdc2
[ 2.688623] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 2.700946] sda: sda1 sda2
[ 2.722336] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.832295] crng init done
[ 11.635022] EXT4-fs (sdj2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.767753] cgroup2: Unknown parameter 'memory_recursiveprot'
[ 11.771504] systemd[1]: systemd 250.3-2-manjaro running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 11.786900] systemd[1]: Detected architecture x86-64.
[ 11.787466] systemd[1]: Hostname set to <64ssd>.
[ 12.074073] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 12.083250] systemd[1]: Queued start job for default target Graphical Interface.
[ 12.084463] systemd[1]: Created slice Slice /system/getty.
[ 12.084790] systemd[1]: Created slice Slice /system/modprobe.
[ 12.085081] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 12.085324] systemd[1]: Created slice Slice /system/wol.
[ 12.085508] systemd[1]: Created slice User and Session Slice.
[ 12.085596] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 12.085647] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 12.085892] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 12.085961] systemd[1]: Reached target Local Encrypted Volumes.
[ 12.085979] systemd[1]: Reached target Login Prompts.
[ 12.085993] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 12.086020] systemd[1]: Reached target Remote File Systems.
[ 12.086034] systemd[1]: Reached target Slice Units.
[ 12.086050] systemd[1]: Reached target Swaps.
[ 12.086070] systemd[1]: Reached target Local Verity Protected Volumes.
[ 12.086144] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 12.086265] systemd[1]: Listening on LVM2 poll daemon socket.
[ 12.087331] systemd[1]: Listening on Process Core Dump Socket.
[ 12.087479] systemd[1]: Listening on Journal Audit Socket.
[ 12.087586] systemd[1]: Listening on Journal Socket (/dev/log).
[ 12.087698] systemd[1]: Listening on Journal Socket.
[ 12.087968] systemd[1]: Listening on udev Control Socket.
[ 12.088054] systemd[1]: Listening on udev Kernel Socket.
[ 12.088849] systemd[1]: Mounting Huge Pages File System...
[ 12.089538] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.090285] systemd[1]: Mounting Kernel Debug File System...
[ 12.091056] systemd[1]: Mounting Kernel Trace File System...
[ 12.091957] systemd[1]: Mounting Temporary Directory /tmp...
[ 12.092703] systemd[1]: Starting Load AppArmor profiles...
[ 12.093517] systemd[1]: Starting Create List of Static Device Nodes...
[ 12.094141] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 12.094861] systemd[1]: Starting Load Kernel Module configfs...
[ 12.095605] systemd[1]: Starting Load Kernel Module drm...
[ 12.096388] systemd[1]: Starting Load Kernel Module fuse...
[ 12.096494] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 12.097972] systemd[1]: Starting Journal Service...
[ 12.099534] systemd[1]: Starting Load Kernel Modules...
[ 12.100252] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 12.100324] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[ 12.101012] systemd[1]: Starting Coldplug All udev Devices...
[ 12.102601] systemd[1]: Mounted Huge Pages File System.
[ 12.102725] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.102832] systemd[1]: Mounted Kernel Debug File System.
[ 12.102932] systemd[1]: Mounted Kernel Trace File System.
[ 12.103029] systemd[1]: Mounted Temporary Directory /tmp.
[ 12.103238] systemd[1]: Finished Create List of Static Device Nodes.
[ 12.105392] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 12.108396] systemd[1]: Finished Load Kernel Module configfs.
[ 12.109274] systemd[1]: Mounting Kernel Configuration File System...
[ 12.109970] EXT4-fs (sdj2): re-mounted. Opts: (null)
[ 12.111129] fuse: init (API version 7.31)
[ 12.111153] *** VALIDATE fuse ***
[ 12.111156] *** VALIDATE fuse ***
[ 12.111555] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 12.111680] systemd[1]: Finished Load Kernel Module drm.
[ 12.112414] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 12.112521] systemd[1]: Finished Load Kernel Module fuse.
[ 12.113983] systemd[1]: Mounting FUSE Control File System...
[ 12.114282] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 12.114491] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
[ 12.114992] systemd[1]: Rebuild Hardware Database was skipped because all trigger condition checks failed.
[ 12.115977] systemd[1]: Starting Load/Save Random Seed...
[ 12.116915] systemd[1]: Starting Create System Users...
[ 12.120520] systemd[1]: Mounted Kernel Configuration File System.
[ 12.126641] vboxdrv: loading out-of-tree module taints kernel.
[ 12.126815] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 12.127815] systemd[1]: Finished Load/Save Random Seed.
[ 12.129833] vboxdrv: Found 4 processor cores
[ 12.130305] systemd[1]: Mounted FUSE Control File System.
[ 12.130442] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
[ 12.130786] audit: type=1130 audit(1644291376.128:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.153641] systemd[1]: Finished Create System Users.
[ 12.153687] audit: type=1130 audit(1644291376.151:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.154530] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 12.154713] vboxdrv: TSC mode is Invariant, tentative frequency 3310799248 Hz
[ 12.154714] vboxdrv: Successfully loaded version 6.1.32 r149290 (interface 0x00320000)
[ 12.155772] VBoxNetAdp: Successfully started.
[ 12.160571] VBoxNetFlt: Successfully started.
[ 12.165758] Linux agpgart interface v0.103
[ 12.200085] systemd[1]: Finished Coldplug All udev Devices.
[ 12.200136] audit: type=1130 audit(1644291376.198:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.200519] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 12.201795] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 12.202078] audit: type=1130 audit(1644291376.198:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.210179] systemd[1]: Started Journal Service.
[ 12.210303] audit: type=1130 audit(1644291376.208:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.215948] systemd-journald[284]: Received client request to flush runtime journal.
[ 12.237348] audit: type=1130 audit(1644291376.235:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.258624] audit: type=1400 audit(1644291376.255:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=299 comm="apparmor_parser"
[ 12.263682] audit: type=1400 audit(1644291376.261:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=301 comm="apparmor_parser"
[ 12.263831] audit: type=1400 audit(1644291376.261:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=301 comm="apparmor_parser"
[ 12.285419] audit: type=1400 audit(1644291376.281:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=308 comm="apparmor_parser"
[ 12.532578] nvidia: module license 'NVIDIA' taints kernel.
[ 12.532581] Disabling lock debugging due to kernel taint
[ 12.581036] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[ 12.586217] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.633163] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 510.47.03 Mon Jan 24 22:58:54 UTC 2022
[ 12.674380] nvidia-gpu 0000:01:00.3: enabling device (0000 -> 0002)
[ 12.684417] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 12.684418] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 12.684625] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 12.768530] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.47.03 Mon Jan 24 22:51:43 UTC 2022
[ 12.795566] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 12.826765] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 12.826767] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 12.870291] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.881192] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.897756] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 12.898125] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 12.898163] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 12.898168] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 12.920070] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:04:a6:28:cb:7f
[ 12.920077] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 12.920552] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 12.947337] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
[ 12.947341] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.947344] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20190816/utaddress-204)
[ 12.947346] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[ 12.947348] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.947349] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20190816/utaddress-204)
[ 12.947351] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[ 12.947352] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.947353] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20190816/utaddress-204)
[ 12.947355] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[ 12.947356] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.947357] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.953923] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 12.953926] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.953927] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 12.953927] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 12.953928] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 12.953929] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 12.953930] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 12.953931] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 12.953932] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 13.007504] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 13.007545] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 13.007583] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.007636] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.007711] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.007748] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 13.007783] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 13.007817] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 13.038312] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
[ 13.039078] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 13.045928] input: PC Speaker as /devices/platform/pcspkr/input/input15
[ 13.051690] nvidia-uvm: Loaded the UVM driver, major device number 236.
[ 13.092439] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 13.092441] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 13.092442] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 13.094470] wl 0000:04:00.0: enabling device (0000 -> 0002)
[ 13.108292] cryptd: max_cpu_qlen set to 1000
[ 13.113344] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[ 13.138142] AVX version of gcm_enc/dec engaged.
[ 13.138144] AES CTR mode by8 optimization enabled
[ 13.251486] asus_wmi: ASUS WMI generic driver loaded
[ 13.253771] asus_wmi: Initialization: 0x0
[ 13.253803] asus_wmi: BIOS WMI version: 0.9
[ 13.253856] asus_wmi: SFUN value: 0x0
[ 13.253858] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 13.254297] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input16
[ 13.309949] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 13.320826] iTCO_vendor_support: vendor-support=0
[ 13.323350] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.323409] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 13.323513] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.365436] wl 0000:04:00.0 wlp4s0: renamed from wlan0
[ 13.384049] intel_rapl_common: Found RAPL domain package
[ 13.384051] intel_rapl_common: Found RAPL domain core
[ 13.384055] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 13.487297] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 13.487343] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 13.487383] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 13.989547] mousedev: PS/2 mouse device common for all mice
[ 14.285400] nvidia-gpu 0000:01:00.3: i2c timeout error e0000000
[ 14.285418] ucsi_ccg 0-0008: i2c_transfer failed -110
[ 14.285421] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[ 14.285433] ucsi_ccg: probe of 0-0008 failed with error -110
[ 14.698125] mc: Linux media interface: v0.10
[ 14.718798] Bluetooth: Core ver 2.22
[ 14.718823] NET: Registered protocol family 31
[ 14.718823] Bluetooth: HCI device and connection manager initialized
[ 14.718827] Bluetooth: HCI socket layer initialized
[ 14.718829] Bluetooth: L2CAP socket layer initialized
[ 14.718832] Bluetooth: SCO socket layer initialized
[ 14.727144] videodev: Linux video capture interface: v2.00
[ 14.794243] usbcore: registered new interface driver btusb
[ 15.913381] usb 3-1.4: set resolution quirk: cval->res = 384
[ 15.913788] usbcore: registered new interface driver snd-usb-audio
[ 15.913903] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b)
[ 15.951532] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input20
[ 15.951740] usbcore: registered new interface driver uvcvideo
[ 15.951742] USB Video Class driver (1.1.1)
[ 16.640075] proc: Bad value for 'hidepid'
[ 18.016896] kauditd_printk_skb: 23 callbacks suppressed
[ 18.016898] audit: type=1130 audit(1644291382.015:35): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.023887] audit: type=1130 audit(1644291382.021:36): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.032954] audit: type=1130 audit(1644291382.028:37): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=cronie comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.037673] audit: type=1130 audit(1644291382.035:38): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.043890] audit: type=1130 audit(1644291382.041:39): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.045320] audit: type=1130 audit(1644291382.041:40): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=linux-module-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.045340] audit: type=1131 audit(1644291382.041:41): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=linux-module-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.163536] audit: type=1130 audit(1644291382.161:42): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.164570] audit: type=1130 audit(1644291382.161:43): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=bluetooth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.167590] audit: type=1130 audit(1644291382.165:44): pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=NetworkManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.184506] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.184508] Bluetooth: BNEP filters: protocol multicast
[ 18.184511] Bluetooth: BNEP socket layer initialized
[ 18.195155] proc: Bad value for 'hidepid'
[ 18.205911] NET: Registered protocol family 38
[ 18.526746] loop: module loaded
[ 18.551681] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 18.625932] proc: Bad value for 'hidepid'
[ 21.509466] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 21.509523] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 23.036028] kauditd_printk_skb: 186 callbacks suppressed
[ 23.036030] audit: type=1100 audit(1644291387.031:231): pid=1710 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:authentication grantors=pam_shells,pam_permit acct="mitchell" exe="/usr/lib/gdm-session-worker" hostname=64ssd addr=? terminal=/dev/tty1 res=success'
[ 23.037538] audit: type=1101 audit(1644291387.035:232): pid=1710 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="mitchell" exe="/usr/lib/gdm-session-worker" hostname=64ssd addr=? terminal=/dev/tty1 res=success'
[ 23.038647] audit: type=1103 audit(1644291387.035:233): pid=1710 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:setcred grantors=pam_shells,pam_permit acct="mitchell" exe="/usr/lib/gdm-session-worker" hostname=64ssd addr=? terminal=/dev/tty1 res=success'
[ 23.041753] audit: type=1006 audit(1644291387.038:234): pid=1710 uid=0 subj==unconfined old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=24 res=1
[ 23.059461] audit: type=1105 audit(1644291387.055:235): pid=1710 uid=0 auid=1000 ses=24 subj==unconfined msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_systemd_home,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env,pam_gnome_keyring acct="mitchell" exe="/usr/lib/gdm-session-worker" hostname=64ssd addr=? terminal=/dev/tty2 res=success'
[ 23.100317] audit: type=1106 audit(1644291387.098:236): pid=1710 uid=0 auid=1000 ses=24 subj==unconfined msg='op=PAM:session_close grantors=pam_loginuid,pam_keyinit,pam_systemd_home,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env,pam_gnome_keyring acct="mitchell" exe="/usr/lib/gdm-session-worker" hostname=64ssd addr=? terminal=/dev/tty2 res=success'
[ 23.100371] audit: type=1104 audit(1644291387.098:237): pid=1710 uid=0 auid=1000 ses=24 subj==unconfined msg='op=PAM:setcred grantors=pam_shells,pam_permit acct="mitchell" exe="/usr/lib/gdm-session-worker" hostname=64ssd addr=? terminal=/dev/tty2 res=success'
[ 23.224465] audit: type=1100 audit(1644291387.221:238): pid=1724 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:authentication grantors=pam_shells,pam_permit acct="mitchell" exe="/usr/lib/gdm-session-worker" hostname=64ssd addr=? terminal=/dev/tty1 res=success'
[ 23.225848] audit: type=1101 audit(1644291387.221:239): pid=1724 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="mitchell" exe="/usr/lib/gdm-session-worker" hostname=64ssd addr=? terminal=/dev/tty1 res=success'
[ 23.226884] audit: type=1103 audit(1644291387.225:240): pid=1724 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:setcred grantors=pam_shells,pam_permit acct="mitchell" exe="/usr/lib/gdm-session-worker" hostname=64ssd addr=? terminal=/dev/tty1 res=success'
[ 28.120150] kauditd_printk_skb: 185 callbacks suppressed
[ 28.120152] audit: type=1100 audit(1644291392.118:426): pid=2278 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:authentication grantors=pam_shells,pam_permit acct="mitchell" exe="/usr/lib/gdm-session-worker" hostname=64ssd addr=? terminal=/dev/tty1 res=success'
[ 28.122385] audit: type=1101 audit(1644291392.118:427): pid=2278 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="mitchell" exe="/usr/lib/gdm-session-worker" hostname=64ssd addr=? terminal=/dev/tty1 res=success'
[ 28.123813] audit: type=1103 audit(1644291392.121:428): pid=2278 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='op=PAM:setcred grantors=pam_shells,pam_permit acct="mitchell" exe="/usr/lib/gdm-session-worker" hostname=64ssd addr=? terminal=/dev/tty1 res=success'
[ 28.126811] audit: type=1006 audit(1644291392.125:429): pid=2278 uid=0 subj==unconfined old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=51 res=1
Any advice would be much appreciated, not sure where to proceed
Thank you