REISUB doesn't work, but REISUO does

Hello,

I think that my GPU crashed while trying out non-native games, and when it crashes my monitor turns off due to not detecting video input but I still hear the game sounds.

Whenever this happened, I tried to use REISUB but everytime I tried that, my PC made 3~ beeping sounds and it didn’t work. However, when I used REISUO instead it just works without any beeping whatsoever.

The reason I want to be able to use REISUB is, so I can have a journalctl entry for when my GPU (I think) crashes.

inxi output:

inxi --admin --verbosity=7 --filter --no-host --width
System:
  Kernel: 5.18.17-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.1.1
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.18-x86_64
    root=UUID=60fe6756-469a-4df1-8e23-bfb9d193f49f rw quiet apparmor=1
    security=apparmor udev.log_priority=3 amdgpu.ppfeaturemask=0xffffffff
  Desktop: KDE Plasma v: 5.24.6 tk: Qt v: 5.15.5 wm: kwin_x11 vt: 1 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: ASUSTeK model: TUF B450-PRO GAMING v: Rev X.0x
    serial: <superuser required> UEFI: American Megatrends v: 2202
    date: 07/14/2020
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 15.56 GiB used: 2 GiB (12.8%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges
    required.
CPU:
  Info: model: AMD Ryzen 5 3600 bits: 64 type: MT MCP arch: Zen 2 gen: 3
    built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x71 (113)
    stepping: 0 microcode: 0x8701021
  Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
    L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
    L3: 32 MiB desc: 2x16 MiB
  Speed (MHz): avg: 2387 high: 3593 min/max: 2200/4208 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 3593 2: 2138
    3: 2051 4: 2195 5: 2196 6: 2195 7: 3593 8: 2051 9: 2051 10: 2194 11: 2194
    12: 2194 bogomips: 86277
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
    f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibs
    irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe
    msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae
    pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
    pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a
    rdtscp rep_good sep sev sev_es sha_ni skinit smap smca smep ssbd sse sse2
    sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext
    tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall
    wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP
    protection
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP:
    always-on, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
    vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-4 code: Arctic Islands
    process: GF 14nm built: 2016-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    ports: active: DP-2 empty: DP-1, DVI-D-1, HDMI-A-1, HDMI-A-2
    bus-ID: 08:00.0 chip-ID: 1002:67df class-ID: 0300
  Display: x11 server: X.Org v: 21.1.4 compositor: kwin_x11 driver: X:
    loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa gpu: amdgpu
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: DP-2 mapped: DisplayPort-1 model: ASUS VP248QG serial: <filter>
    built: 2020 res: 1920x1080 dpi: 92 gamma: 1.2 size: 531x299mm (20.91x11.77")
    diag: 609mm (24") ratio: 16:9 modes: max: 1920x1080 min: 720x400
  OpenGL: renderer: AMD Radeon RX 580 Series (polaris10 LLVM 14.0.6 DRM 3.46
    5.18.17-1-MANJARO) v: 4.6 Mesa 22.1.6 direct render: Yes
Audio:
  Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
    vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
    lanes: 16 bus-ID: 08:00.1 chip-ID: 1002:aaf0 class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 0a:00.4 chip-ID: 1022:1487 class-ID: 0403
  Sound Server-1: ALSA v: k5.18.17-1-MANJARO running: yes
  Sound Server-2: JACK v: 0.125.0 running: no
  Sound Server-3: PulseAudio v: 16.1 running: yes
  Sound Server-4: PipeWire v: 0.3.56 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK PRIME B450M-A driver: r8168 v: 8.050.03-NAPI modules: r8169
    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 03:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 2.04 TiB used: 203.25 GiB (9.7%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST2000DM008-2FR102
    size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    type: HDD rpm: 7200 serial: <filter> rev: 0001 scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital
    model: WDS240G2G0A-00JH30 size: 223.57 GiB block-size: physical: 512 B
    logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 0400
    scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 223.27 GiB size: 218.71 GiB (97.96%) used: 203.25 GiB
    (92.9%) fs: ext4 dev: /dev/sdb2 maj-min: 8:18 label: N/A
    uuid: 60fe6756-469a-4df1-8e23-bfb9d193f49f
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 312 KiB
    (0.1%) fs: vfat dev: /dev/sdb1 maj-min: 8:17 label: N/A uuid: D777-5487
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 1.77 TiB fs: ext4 label: N/A
    uuid: 09427639-084e-42b3-a1e3-d188274b9460
  ID-2: /dev/sda2 maj-min: 8:2 size: 48.83 GiB fs: ext4 label: N/A
    uuid: 0cd51c5c-bc1d-443e-8fa9-396879dfc5a0
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 10 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-8:2 info: Wacom CTH-490 [Intuos Art/Photo/Comic (S)]
    type: HID,Mouse driver: usbhid,wacom interfaces: 3 rev: 2.0 speed: 12 Mb/s
    power: 498mA chip-ID: 056a:033c class-ID: 0301
  Device-2: 1-10:3 info: Cherry GmbH USB Optical Mouse type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s
    power: 100mA chip-ID: 046a:000c class-ID: 0301
  Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-4: 4-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 60.5 C mobo: N/A gpu: amdgpu temp: 47.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 1197
Info:
  Processes: 305 Uptime: 10m wakeups: 0 Init: systemd v: 251
  default: graphical tool: systemctl Compilers: gcc: 12.1.1 clang: 14.0.6
  Packages: 1935 pacman: 1929 lib: 539 flatpak: 6 Shell: Bash v: 5.1.16
  running-in: konsole inxi: 3.3.20

Hi @pstilka,

While I’ve never done or used this, I can tell you to check that everything’s setup correctly:

Hope this helps!

Why don’t you have the journal? The first commands (REISU) should flush/sync the journal no matter if you turn the system off (O) or reboot (B).