Audio services doesn't work properly on startup

Support
1

Hi guys
I have two users (recently created second one) and have same problem with both of them. On startup sometimes audio is not working Built-in Audio Analog Stereo is disabled have to re enable it manually, sometimes enabling is not available from Audi System Settings.

 System:
  Kernel: 5.7.17-2-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.7-x86_64 
  root=UUID=f3ea9f0a-64af-4f49-900f-ed76bf207bf4 rw quiet apparmor=1 
  security=apparmor udev.log_priority=3 
  Desktop: KDE Plasma 5.19.4 tk: Qt 5.15.0 info: latte-dock wm: kwin_x11 
  dm: SDDM Distro: Manjaro Linux 
Machine:
  Type: Laptop System: HP product: HP ProBook 450 G6 v: N/A serial: <filter> 
  Chassis: type: 10 serial: <filter> 
  Mobo: HP model: 8538 v: KBC Version 51.27.00 serial: <filter> UEFI: HP 
  v: R71 Ver. 01.10.00 date: 01/03/2020 
Battery:
  ID-1: BAT0 charge: 15.9 Wh condition: 41.3/41.3 Wh (100%) volts: 11.1/11.6 
  model: Hewlett-Packard Primary type: Li-ion serial: <filter> 
  status: Discharging 
CPU:
  Topology: Quad Core model: Intel Core i5-8265U bits: 64 type: MT MCP 
  arch: Kaby Lake family: 6 model-id: 8E (142) stepping: C (12) microcode: D6 
  L2 cache: 6144 KiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx 
  bogomips: 28808 
  Speed: 800 MHz min/max: 400/3900 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 
  4: 800 5: 800 6: 800 7: 800 8: 800 
  Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling 
  Type: srbds mitigation: TSX disabled 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: Intel UHD Graphics 620 vendor: Hewlett-Packard driver: i915 
  v: kernel bus ID: 00:02.0 chip ID: 8086:3ea0 
  Device-2: Chicony HP HD Camera type: USB driver: uvcvideo bus ID: 1-2:2 
  chip ID: 04f2:b669 serial: <filter> 
  Display: x11 server: X.Org 1.20.8 compositor: kwin_x11 driver: intel 
  unloaded: modesetting alternate: fbdev,vesa display ID: :0 screens: 1 
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
  s-diag: 582mm (22.9") 
  Monitor-1: eDP1 res: 1920x1080 hz: 60 dpi: 143 size: 340x190mm (13.4x7.5") 
  diag: 389mm (15.3") 
  OpenGL: renderer: Mesa Intel UHD Graphics 620 (WHL GT2) v: 4.6 Mesa 20.1.6 
  direct render: Yes 
Audio:
  Device-1: Intel Cannon Point-LP High Definition Audio 
  vendor: Hewlett-Packard driver: snd_hda_intel v: kernel 
  alternate: snd_soc_skl,snd_sof_pci bus ID: 00:1f.3 chip ID: 8086:9dc8 
  Sound Server: ALSA v: k5.7.17-2-MANJARO 
Network:
  Device-1: Intel Cannon Point-LP CNVi [Wireless-AC] driver: iwlwifi v: kernel 
  port: 4000 bus ID: 00:14.3 chip ID: 8086:9df0 
  IF: wlp0s20f3 state: up mac: <filter> 
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Hewlett-Packard driver: r8169 v: kernel port: 3000 bus ID: 01:00.0 
  chip ID: 10ec:8168 
  IF: enp1s0 state: down mac: <filter> 
  IF-ID-1: docker0 state: down mac: <filter> 
Drives:
  Local Storage: total: 704.24 GiB used: 54.88 GiB (7.8%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/nvme0n1 vendor: SK Hynix model: BC501 HFM256GDJTNG-8310A 
  size: 238.47 GiB block size: physical: 512 B logical: 512 B speed: 15.8 Gb/s 
  lanes: 2 serial: <filter> rev: 80002C00 scheme: GPT 
  ID-2: /dev/sda vendor: Hitachi model: HTS545050A7E380 size: 465.76 GiB 
  block size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s 
  rotation: 5400 rpm serial: <filter> rev: A6C0 scheme: GPT 
Partition:
  ID-1: / raw size: 238.17 GiB size: 233.43 GiB (98.01%) 
  used: 54.88 GiB (23.5%) fs: ext4 dev: /dev/nvme0n1p2 
Swap:
  Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
  ID-1: swap-1 type: file size: 16.00 GiB used: 0 KiB (0.0%) priority: -2 
  file: /swapfile 
Sensors:
  System Temperatures: cpu: 42.0 C mobo: 0.0 C 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 267 Uptime: 12m Memory: 7.65 GiB used: 1.69 GiB (22.0%) 
  Init: systemd v: 246 Compilers: gcc: 10.2.0 Packages: 1351 pacman: 1333 
  lib: 360 flatpak: 10 snap: 8 Shell: Bash v: 5.0.18 running in: konsole 
  inxi: 3.1.05
2

Don’t do this. If either one of your problems get solved, searching the forums for a similar problem by another user becomes that much harder.

Please edit, tag, and split accordingly.

1 Like
3

okay I’ll do it

1 Like
4

@merlock well done as you suggested
can you help? I would apperciate it

5

LOL, you’re gonna strike out here, my friend.

  1. Don’t use KDE

  2. Only Wi-Fi that I use is for my iPads. (no schtinking bluetooth either).

  3. I’m not well versed on sound issues. I’m one of the lucky ones that sound has always “just worked” for me without any intervention.

Sorry… :frowning:

1 Like
6

Why ? What’s is the problem with it?
Honestly I prefer KDE to Gnome because in my opinion it has more features for costumization and have less problems and issues. Maybe I couldn’t adapt to gnome beacuase I didn’t use it for a long time

7

Err…I don’t use KDE.