javi12
3 December 2023 10:11
1
This happens after changing from kernel 5.4 to 5.10.
After reboot and login everything is fine. But once screen get automatically locked and after login get a black screen with only visible mouse pointer.
If terminal was open and focus was of it before screen lock, I can start an application that has an UI like ms vs code or Firefox then the screen is re-draw and everything is fine again. When screen gets auto locked, then it get same issue.
I have tried things found in other topics like update repo mirrors, update system, clean .cache/, changed back to kernel 5.4, but nothing helps.
I read other similar topics but nothing worked so far.
Your help will be highly appreciated.
1 Like
What happens if you change to kernel 6.1 or 6.6? (current iterations)
javi12
3 December 2023 12:25
3
thanks for your reply.
Installed 6.1 and tried it, but same issue.
I use KDE; it’s been a while since using Xfce, so all I could do is guess. However, more information may improve things.
Could you post the output of:
inxi --admin --verbosity=7 --filter --no-host --width
This will give others enough information to start with. Good luck.
javi12
3 December 2023 13:28
5
Here is my inxi output:
System:
Kernel: 5.4.262-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-5.4-x86_64
root=UUID=34200cf0-3f43-44a5-9dd6-bbfb8aaeb3e1 rw quiet
resume=UUID=964b0fc9-3f91-4bb8-a8ab-09c7129aac7d
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: Gigabyte product: X470 AORUS GAMING 5 WIFI v: N/A
serial: <superuser required>
Mobo: Gigabyte model: X470 AORUS GAMING 5 WIFI-CF v: x.x
serial: <superuser required> UEFI: American Megatrends v: F3 date: 08/08/2018
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
Memory:
System RAM: total: 32 GiB available: 31.37 GiB used: 2.22 GiB (7.1%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 7 2700X bits: 64 type: MT MCP arch: Zen+ gen: 2
level: v3 note: check built: 2018-21 process: GF 12nm family: 0x17 (23)
model-id: 8 stepping: 2 microcode: 0x800820D
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 768 KiB desc: d-8x32 KiB; i-8x64 KiB L2: 4 MiB desc: 8x512 KiB L3: 16 MiB
desc: 2x8 MiB
Speed (MHz): avg: 2645 high: 3989 min/max: 2200/3700 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 3320 2: 3342
3: 2132 4: 2088 5: 2117 6: 3230 7: 2205 8: 2232 9: 3802 10: 2341 11: 2167
12: 2154 13: 3989 14: 2196 15: 2628 16: 2383 bogomips: 118419
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb
cpuid cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c
flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf
lahf_lm lbrv lm mca mce misalignsse mmx mmxext monitor movbe msr mtrr
mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat
pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
pfthreshold pge pni popcnt pse pse36 rdrand rdseed rdtscp rep_good sep sev
sev_es sha_ni skinit smap smca sme smep ssbd sse sse2 sse4_1 sse4_2 sse4a
ssse3 succor svm svm_lock syscall tce topoext tsc tsc_scale
v_vmsave_vmload vgif vmcb_clean vme vmmcall wdt xgetbv1 xsave xsavec
xsaveerptr xsaveopt xsaves
Graphics:
Device-1: NVIDIA TU106 [GeForce RTX 2070 Rev. A] vendor: Micro-Star MSI
driver: nvidia v: 545.29.06 alternate: nouveau,nvidia_drm non-free: 545.xx+
status: current (as of 2023-11; EOL~2026-12-xx) arch: Turing code: TUxxx
process: TSMC 12nm FF built: 2018-2022 pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 09:00.0 chip-ID: 10de:1f07 class-ID: 0300
Display: x11 server: X.Org v: 21.1.9 compositor: xfwm v: 4.18.0 driver: X:
loaded: nvidia gpu: nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 7295x2160 s-dpi: 96 s-size: 1930x572mm (75.98x22.52")
s-diag: 2013mm (79.25")
Monitor-1: DP-2 pos: primary,right res: 3840x2160 hz: 60 dpi: 161
size: 607x345mm (23.9x13.58") diag: 698mm (27.49") modes: N/A
Monitor-2: HDMI-0 pos: left res: 3264x1836 hz: 60 dpi: 139
size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A
API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
Device-1: NVIDIA TU106 High Definition Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 09:00.1 chip-ID: 10de:10f9 class-ID: 0403
Device-2: AMD Family 17h HD Audio vendor: Gigabyte driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 0b:00.3
chip-ID: 1022:1457 class-ID: 0403
API: ALSA v: k5.4.262-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.0.0 status: off tools: pw-cli
Server-3: PulseAudio v: 16.1 status: active with: 1: pulseaudio-alsa
type: plugin 2: pulseaudio-jack type: module tools: pacat,pactl,pavucontrol
Network:
Device-1: Intel Wireless-AC 9260 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2526 class-ID: 0280
IF: wlp5s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Device-2: Intel I211 Gigabit Network vendor: Gigabyte driver: igb
v: 5.6.0-k pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 06:00.0
chip-ID: 8086:1539 class-ID: 0200
IF: enp6s0 state: down mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel Wireless-AC 9260 Bluetooth Adapter driver: btusb v: 0.8
type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-2:2
chip-ID: 8087:0025 class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 5.1
lmp-v: 10 status: discoverable: yes pairing: yes class-ID: 7c0104
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 4.53 TiB used: 288.54 GiB (6.2%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Intenso model: SATA III SSD
size: 447.13 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: BA.3 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD40EZRZ-00GXCB0 size: 3.64 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
fw-rev: 0A80 scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 860 EVO 500GB
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 2B6Q scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 430.9 GiB size: 423.07 GiB (98.18%)
used: 173.69 GiB (41.1%) fs: ext4 dev: /dev/sdc2 maj-min: 8:34 label: N/A
uuid: 34200cf0-3f43-44a5-9dd6-bbfb8aaeb3e1
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 25.4 MiB (8.5%) fs: vfat dev: /dev/sdc1 maj-min: 8:33 label: N/A
uuid: 1EB2-B600
ID-3: /disco/data01 raw-size: 3.09 TiB size: 3.04 TiB (98.40%)
used: 114.82 GiB (3.7%) fs: ext4 dev: /dev/sdb2 maj-min: 8:18 label: data3t
uuid: e87f9053-4899-431a-9df4-d30c6b610db6
ID-4: /disco/data02 raw-size: 417.62 GiB size: 410 GiB (98.18%)
used: 52 KiB (0.0%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: data02
uuid: 415e6b63-6eab-4925-a184-d4627fb16ac2
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 34.56 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/sdc3 maj-min: 8:35 label: N/A
uuid: 964b0fc9-3f91-4bb8-a8ab-09c7129aac7d
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 29.51 GiB fs: ext4 label: N/A
uuid: f8655952-7e14-47fd-ae85-82f50199222e
ID-2: /dev/sdb1 maj-min: 8:17 size: 560.73 GiB fs: ntfs label: N/A
uuid: 7277793253FB399B
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 14 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-2:2 info: Intel Wireless-AC 9260 Bluetooth Adapter
type: bluetooth driver: btusb interfaces: 2 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 8087:0025 class-ID: e001
Device-2: 1-9:3 info: Logitech Unifying Receiver type: keyboard,mouse
driver: logitech-djreceiver,usbhid interfaces: 2 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
chip-ID: 046d:c534 class-ID: 0301
Hub-2: 2-0:1 info: super-speed hub ports: 8 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-4: 4-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-5: 5-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-6: 6-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-7: 7-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-8: 8-0:1 info: super-speed hub ports: 4 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 43.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Processes: 346 Uptime: 1h 7m wakeups: 0 Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 alt: 12
clang: 16.0.6 Packages: pm: pacman pkgs: 1505 libs: 429 tools: pamac
pm: flatpak pkgs: 0 Shell: Bash v: 5.2.21 running-in: xfce4-terminal
inxi: 3.3.31
what ca I do now, thanks
JuTa
4 December 2023 09:57
6
I have same issue
XFCE: 4.18
javi12
6 December 2023 09:27
7
Hi, the issue persists, but like to report what I have done so far.
Deleted the $HOME/.config folder and that “fixed” the issue: Screen is re-drawn after lock > login
Then started to reconfigure all manually: Wallpaper, Panel, Whisker, etc. and at some point the problem re-appeared.
At that point I had the feeling it has to do with the light-locker, so decided to remove it and install/config xfce4-screensaver.
Now I am exhausted of this issue and considering to re-install either xfce or entire Manjaro.
Are there any logs that I can look to try to figure out the source of the problem?
javi12
9 December 2023 12:19
8
Finally, I re-installed Manjaro. Now everything runs fine.
First of all you will have to revert on kernel 5.4, update the system, and clear. cache to address the black screen post-login following auto-lock on kernel 5.10. And then launch an application with UI focus after login for a temporary fix.
The OP has solved the issue by performing a complete reinstall. Anything any of us could add now is probably irrelevant.
system
9 December 2023 16:01
11
This topic was automatically closed 3 hours after the last reply. New replies are no longer allowed.
